Skip to content
NABL accredited testing

NF C 33-021 Testing: Pre-Insulated Joint Sleeves & Lugs

NABL accredited testing of pre-insulated joint sleeves & lugs to NF C 33-021: 12 tests, each against its clause.

Independent private consultancy. Aaditech is not BIS or any government department and is not affiliated with or endorsed by them. Licences are granted only by the authority, and you can apply directly on its portal. Our consultancy fees are separate from official fees.

StandardNF C 33-021
CoversPre-insulated Joint Sleeves and Terminal Lugs
Accredited tests12
AccreditationNABL, ISO/IEC 17025:2017
CategoryOverhead Line Hardware Testing

NF C 33-021 tests we offer

#TestClause / method
1Climatic Ageing TestNFC 33-021 (Clause 6.6)/EN 50483-4 (Clause 8.2.5.2 & 8.3.5.1)
2Corrosion TestNFC 33-021 (Clause 6.7)/EN 50483-6 (Clause 8.4.1)
3Crimping Ability TestNFC 33-021 (Clause 6.3.1)
4Dielectric Voltage TestNFC 33-021 (Clause 6.4.1)/EN 50483-4 (Clause 8.2.3.1)
5Electrical Ageing TestNFC 33-021 (Clause 6.8)/BS EN 50483-4 (CIause 8.2.6 & 8.3.6)
6Low Temperature Mounting TestNFC 33-021 (Clause 6.5)/BS EN 50483-4 (Clause 8.2.4 & 8.3.4)
7MarkingNFC 33-021 (Clause 7)
8Tensile TestNFC 33-021 (Clause 6.3.2)/EN 50483-4 (Clause 8.3.2)
9Water Tightness TestNFC 33-021 (Clause 6.4.2)/EN 50483-4 (Clause 8.3.3)
10Endurance Test under Mechanical and Thermal StressesNFC 33-021 (Clause 6.9)/BS EN 50483-4 (CIause 8.2.7)
11Salt Spray Corrosion TestNFC 33-021 (Clause 6.7.1)
12Sodium Hydroxide Corrosion TestNFC 33-021 (Clause 6.7.2)

How NF C 33-021 testing works

  1. Tell us the purpose. Export, a tender, a customer requirement or a design check. The purpose decides which clauses and which laboratory.
  2. Get the sample list and quote. We confirm the tests, the number of samples and the timeline for your product and its variants.
  3. Send samples. We help with labels, the test request and any technical documents the tests need.
  4. Testing and report. Tests are carried out under NABL accreditation and the report lists each clause, the requirement and the result.
  5. Review and use. We check the report before you submit it to a regulator, a tender authority or your customer, and help if they raise a query.

Frequently asked questions

Which NF C 33-021 tests are NABL accredited?

All 12 tests listed on this page are within NABL accreditation (ISO/IEC 17025), each against the clause of NF C 33-021 shown next to it. The report carries the NABL accreditation mark for these tests.

Is the NF C 33-021 test report accepted outside India?

NABL is a signatory to the ILAC Mutual Recognition Arrangement, so its accredited reports are recognised by accreditation bodies in other member countries. Your buyer or regulator still decides what it accepts, so we confirm their requirement before testing.

How many samples are needed for NF C 33-021 testing?

It depends on the product, its variants and the tests you need. Share the product details and the purpose of the test (BIS, tender or customer) and we will send the sample list and a quote.

Can you test only some clauses of NF C 33-021?

Yes. For a tender, a customer complaint or a design check, we can test selected clauses. For BIS certification or a type test, every applicable clause has to be covered.

Other overhead line hardware testing

All NABL testing categories

See the NABL testing service for how we work. Tests listed are within NABL accreditation (ISO/IEC 17025).

Not sure which certification your product needs?

Talk to a team led by former BIS Directors. We'll map every approval your product needs before you spend on testing.

Call WhatsApp Get a quote