BIS certification product list
All 715 products that need compulsory BIS certification in India, product-wise: 643 under the ISI mark and 72 under CRS registration, with the Indian Standard and order for each. Updated October 2026.
No product matches that search. Ask us whether your product needs BIS.
ISI mark products (Scheme-I)
These products need an ISI mark licence from BIS. Indian factories apply under Scheme-I; overseas factories apply under FMCS.
Cement 16
| Product | Indian Standard | Order |
|---|---|---|
| Sulphate Resisting Portland Cement | IS 12330 | Cement (Quality Control)Order, 2003, S.O. No. 191(E) |
| Low Heat Portland Cement | IS 12600 | Cement (Quality Control)Order, 2003, S.O. No. 191(E) |
| Portland Pozzolana Cement-Part1 Fly-ash Based | IS 1489 (Part 1) | Cement (Quality Control)Order, 2003, S.O. No. 191(E) |
| Portland Pozzolana Cement-Part 2 Calcined Clay Based | IS 1489 (Part 2) | Cement (Quality Control)Order, 2003, S.O. No. 191(E) |
| Ordinary Portland Cement | IS 269 | Cement (Quality Control)Order, 2003, S.O. No. 191(E) |
| Masonry Cement | IS 3466 | Cement (Quality Control)Order, 2003, S.O. No. 191(E) |
| Portland Slag Cement | IS 455 | Cement (Quality Control)Order, 2003, S.O. No. 191(E) |
| High Alumina Cement for Structural Use | IS 6452 | Cement (Quality Control)Order, 2003, S.O. No. 191(E) |
| Super Sulphated Cement | IS 6909 | Cement (Quality Control)Order, 2003, S.O. No. 191(E) |
| Rapid Hardening Portland Cement | IS 8041 | Cement (Quality Control)Order, 2003, S.O. No. 191(E) |
| White Portland Cement | IS 8042 | Cement (Quality Control)Order, 2003, S.O. No. 191(E) |
| Hydrophobic Portland Cement | IS 8043 | Cement (Quality Control)Order, 2003, S.O. No. 191(E) |
| Oil Well Cement | IS 8229 | Cement (Quality Control)Order, 2003, S.O. No. 191(E) |
| Composite Cement | IS 16415: 2015 | Cement (Quality Control)Order, 2003, S.O. No. 191(E) |
| Microfine Ordinary Portland Cement | IS 16993: 2018 | Cement (Quality Control)Order, 2003, S.O. No. 191(E) |
| High Alumina Refractory Cement | IS 15895: 2018 | Cement (Quality Control)Order, 2003, S.O. No. 191(E) |
Household Electrical goods 15
| Product | Indian Standard | Order |
|---|---|---|
| Residual Current Operated Circuit Breakers for House Hold and Similar Uses-Part 1 Circuit Breakers Without Integral Overcurrent Protection (RCCBs) | IS 12640 (Part 1) | Electrical Wires, Cables, Appliances and Protection Devices and Accessories (Quality Control) Order, 2003, No. 189(E) |
| Residual Current Operated Circuit Breakers for Household and Similar Uses–Part 2 Circuit Breakers with Integral Overcurrent Protection(RCVOs) | IS 12640 (Part 2) | Electrical Wires, Cables, Appliances and Protection Devices and Accessories (Quality Control) Order, 2003, No. 189(E) |
| AC Watt-hour Meters, Class 0.5, 1 & 2 | IS 13010 | Electrical Wires, Cables, Appliances and Protection Devices and Accessories (Quality Control) Order, 2003, No. 189(E) |
| AC Static Watt-hour Meters, Class 1 & 2 | IS 13779 | Electrical Wires, Cables, Appliances and Protection Devices and Accessories (Quality Control) Order, 2003, No. 189(E) |
| AC Static Transformer Operated Watt-hour and VAR-hour Meters, Class 0.2S & 0.5S | IS 14697 | Electrical Wires, Cables, Appliances and Protection Devices and Accessories (Quality Control) Order, 2003, No. 189(E) |
| Self Ballasted Lamps for General Lighting Services – Part 1 : Safety Requirements & Part 2 : Performance Requirements | IS 15111 (Part 1 & 2) | Electrical Wires, Cables, Appliances and Protection Devices and Accessories (Quality Control) Order, 2003, No. 189(E) |
| Electric Iron | IS 302 (Part 2/Sec 3) | Electrical Wires, Cables, Appliances and Protection Devices and Accessories (Quality Control) Order, 2003, No. 189(E) |
| Electric Immersion Water-heaters | IS 302 (Part 2/Sec 201) | Electrical Wires, Cables, Appliances and Protection Devices and Accessories (Quality Control) Order, 2003, No. 189(E) |
| Electric Stoves | IS 302 (Part 2/Sec 202) | Electrical Wires, Cables, Appliances and Protection Devices and Accessories (Quality Control) Order, 2003, No. 189(E) |
| Room Heaters | IS 302 (Part 2/Sec 30) | Electrical Wires, Cables, Appliances and Protection Devices and Accessories (Quality Control) Order, 2003, No. 189(E) |
| Switches for Domestic and Similar Purposes | IS 3854 | Electrical Wires, Cables, Appliances and Protection Devices and Accessories (Quality Control) Order, 2003, No. 189(E) |
| Tungsten Filament General Service Electric Lamps (upto100 W ) | IS 418 | Electrical Wires, Cables, Appliances and Protection Devices and Accessories (Quality Control) Order, 2003, No. 189(E) |
| PVC Insulated Cables for Working Voltages up to and Including 1100V | IS 694 | Electrical Wires, Cables, Appliances and Protection Devices and Accessories (Quality Control) Order, 2003, No. 189(E) |
| Electrical Accessories-Circuit Breakers for Overcurrent Protection for Household and Similar Installations | IS 8828 | Electrical Wires, Cables, Appliances and Protection Devices and Accessories (Quality Control) Order, 2003, No. 189(E) |
| Elastomer Insulated Cables (Part.1): for Working Voltages up to and including1100 V | IS 9968 (Part 1) | Electrical Wires, Cables, Appliances and Protection Devices and Accessories (Quality Control) Order, 2003, No. 189(E) |
Batteries 1
| Product | Indian Standard | Order |
|---|---|---|
| Multi-Purpose Dry Batteries | IS 8144 | BIS notification, SO 516(E) |
Feeding Bottles 2
| Product | Indian Standard | Order |
|---|---|---|
| Plastic Feeding Bottles | IS 14625 | The Infant Milk Substitutes, Feeding Bottles and Infant Foods (regulation of production, supply and distribution), Act 1992 |
| Glass Feeding Bottles | IS 5168 | The Infant Milk Substitutes, Feeding Bottles and Infant Foods (regulation of production, supply and distribution), Act 1992 |
Oil Pressure Stoves 3
| Product | Indian Standard | Order |
|---|---|---|
| Oil Pressure Stove, Offset Burner Type | IS 10109 | Oil Pressure Stoves (Q.C) Order, 1997, SO 451(E) |
| Multi-burner Oil Pressure Stoves | IS 2787 | Oil Pressure Stoves (Q.C) Order, 1997, SO 451(E) |
| Oil Pressure Stoves | IS 1342 | Oil Pressure Stoves (Q.C) Order, 1997, SO 451(E) |
Automobile Accessories 4
| Product | Indian Standard | Order |
|---|---|---|
| Automotive Vehicles –Tubes for Pneumatic Tyres | IS 13098 | Pneumatic Tyres and Tubes for Automotive Vehicles (Quality Control) Order, 2009, S.O. No. 2953(E) |
| Automotive Vehicles– Pneumatic Tyres for Two and Three-wheeled Motor Vehicles | IS 15627 | Pneumatic Tyres and Tubes for Automotive Vehicles (Quality Control) Order, 2009, S.O. No. 2953(E) |
| Automotive Vehicles-Pneumatic Tyres for Passenger Car Vehicles– Diagonal and Radial Ply | IS 15633 | Pneumatic Tyres and Tubes for Automotive Vehicles (Quality Control) Order, 2009, S.O. No. 2953(E) |
| Automotive Vehicles- Pneumatic Tyres for Commercial Vehicles-Diagonal and Radial Ply | IS 15636 | Pneumatic Tyres and Tubes for Automotive Vehicles (Quality Control) Order, 2009, S.O. No. 2953(E) |
Cylinder, Valves and Regulator 15
Medical Equipment 3
| Product | Indian Standard | Order |
|---|---|---|
| Clinical Thermometers :Part1 Solid Stem Type | IS 3055 (Part 1) | Clinical Thermometers (Quality Control), 2001, GSR No. 843(E) |
| Clinical Thermometers :Part 2 Enclosed Scale Type | IS 3055 (Part 2) | Clinical Thermometers (Quality Control), 2001, GSR No. 843(E) |
| Diagnostic Medical X-Ray Equipment | IS 7620 (Part 1) | Diagnostic Medical X- Ray Equipment AERB/443/39 MDX/3509/94,Oct. 94 |
Steel and Iron Products 157
Electrical Transformers 1
| Product | Indian Standard | Order |
|---|---|---|
| Out Door Type Oil Immersed Distribution Transformers Upto and Including 2500 kVA, 33 KV-specification Part 1 Mineral Oil Immersed | IS 1180 (Part 1) | Electrical transformers (Quality Control ) order, 2015, S.O. 1221 (E) |
Electrical Motors 1
| Product | Indian Standard | Order |
|---|---|---|
| Energy Efficient Induction Motors-Three Phase Squirrel Cage | IS 12615 | BIS notification, SO 178(E) |
Capacitors 3
| Product | Indian Standard | Order |
|---|---|---|
| A.C. Motor Capacitors | IS 2993 | BIS notification, SO 2434(E) |
| Power Capacitors of Self-healing Type for AC Power Systems Having Rated Voltage up to 650V | IS 13340 | BIS notification, SO 2434(E) |
| Shunt Power Capacitors of the Non-Self-Healing Type for AC System Having a Rated Voltage up to and Including 1000V Part-1 General Performance, Testing Amd Rating Safety Requirements Guide for Installation and Operation | IS 13585 Part 1 | BIS notification, SO 2434(E) |
Chemicals, Fertilizers, Polymers & Textiles 26
| Product | Indian Standard | Order |
|---|---|---|
| Caustic Soda | IS 252:2013 | Bureau of Indian Standard (Caustic Soda) Order, 2018 |
| Boric Acid | IS 10116 : 2015 | Bureau of Indian Standards (Standards for Boric Acid) Order, 2019, S.O. 1766(E) |
| Poly Aluminium Chloride | IS 15573 | Poly Aluminium Chloride (Quality Control) Order, 2019, S.O. 2790 (E) |
| Phthalic Anhydride, Technical | IS 5158: 1987 | Phthalic Anhydride (Quality Control) Order, 2020., S.O. 1402(E) |
| Gamma Picoline | IS 16113:2013 | Gamma Picoline (Quality Control) Order, 2020, S.O.1891(E) |
| Morpholine | IS 12084: 2018 | Morpholine (Quality Control) Order, 2020, S.O.1893(E) |
| Sodium Sulphide, Technical | IS 297:2001 | Sodium Sulphide (Quality Control) Order, 2020, S.O.1894(E) |
| Potassium Carbonate, Anhydrous | IS 7129:1992 | Potassium Carbonate (Quality Control) Order, 2020, S.O.1895(E) |
| Acetone | IS 170:2004 | Acetone (Quality Control) Order, 2020, S.O.1896(E) |
| Phosphorous Trichloride, Pure and Analytical Reagent | IS 4581:1978 | Phosphorous Trichloride (Quality Control) Order, 2020, S.O.1897(E) |
| Phosphorous Pentachloride, Technical | IS 11744:1986 | Phosphorous Pentachloride, (Quality Control) Order, 2020, S.O.1898(E) |
| Phosphorous Oxychloride, Technical | IS 11657:1986 | Phosphorous Oxychloride, (Quality Control) Order, 2020, S.O.1899(E) |
| Stabilized Hydrogen Peroxide | IS 2080:2021 | Hydrogen Peroxide, (Quality Control) Order, 2020, S.O.1900(E) |
| Precipitated Barium Carbonate, Technical | IS 3205:1984 | Precipitated Barium Carbonate, (Quality Control) Order, 2020, S.O.1901(E) |
| Precipitated Barium for Ceramic and Glass Industry | IS 12928:1990 | Precipitated Barium Carbonate, (Quality Control) Order, 2020, S.O.1901(E) |
| Sodium Formaldehyde Sulphoxylate | IS 4505:2015 | Sodium Formaldehyde Sulphoxylate, (Quality Control) Order, 2020, S.O.1902(E) |
| N- Butyl Acrylate | IS 14709:1999 | n- Butyl Acrylate (Quality Control) Order, 2020, S.O. 2182(E) |
| Ether | IS 336:1973 | Ether (Quality Control) Order, 2020, S.O. 2183(E) |
| Styrene-Butadiene Rubber Latex | IS 11356:2020 | Styrene-Butadiene Rubber Latex (Quality Control) Order, 2021, S.O. 1626 (E) |
| Synthetic Micro-Fibres for Use in Cement Based Matrix | IS 16481:2016 | Synthetic Micro-Fibres for use in Cement Based Matrix (Quality Control) Order, 2021, S.O. 1627 (E) |
| Linear Alkyl Benzene | IS 12795:2020 | Linear Alkyl Benzene (Quality Control) Order, 2021, S.O. 1664 (E) |
| 3(N, N-DiEthyl) Aminophenol | IS 7686:2020 | 3 (N, N Di-Ethyl) Aminophenol (Quality Control) Order, 2021, S.O. No. 2031 (E) |
| Methylene Chloride (Dichloromethane) | IS 4566:2020 | Methylene Chloride (Dichloromethane) (Quality Control) Order, 2021, S.O. No. 2032 (E) |
| Red Phosphorus | IS 2012:2006 | Red Phosphorus (Quality Control) Order, 2021, S.O. No. 2033 (E) |
| 1,3 Phenylenediamine | IS 17450 : 2020 | 1,3 Phenylenediamine (Quality Control) Order, 2022, S.O. 1960(E) |
| Rubberseed Fatty Acids | IS 12124 : 1987 | Rubberseed Fatty Acids (Quality Control) Order, 2022, S.O. 1961(E) |
Kitchen Appliances 2
| Product | Indian Standard | Order |
|---|---|---|
| Hand-held Blender | IS 302 (Part 2/ Section 14) | Bureau of Indian Standards Kitchen Appliances (Quality Control) Order, 2018, S.O. 5243(E) |
| Domestic Electric Food Mixer (Liquidizers and Grinders) and Centrifugal Juicer | IS 4250 | Bureau of Indian Standards Kitchen Appliances (Quality Control) Order, 2018, S.O. 5243(E) |
Domestic Water Heaters for use with LPG 1
| Product | Indian Standard | Order |
|---|---|---|
| Instantaneous Domestic Water Heater for Use with Liquefied Petroleum Gas | IS 15558 | Bureau of Indian Standards Domestic Water Heater for Use with Liquefied Petroleum Gas (Quality Control) Order, 2018, S.O. 5244(E) |
Plugs and Socket-Outlets and Alternating Current Direct Connected Static Prepayment Meters for Active Energy 2
| Product | Indian Standard | Order |
|---|---|---|
| Plugs and Socket-outlets of Rated Voltage up to and Including 250 Volts and Rated Current up to and Including 16 Amperes | IS 1293 : 2005 | Plugs and Socket-Outlets and Alternating Current Direct Connected Static Prepayment Meters for Active Energy (Quality Control) Order, 2019, S.O. 4353(E) |
| Alternating Current Direct Connected Static Prepayment Meters for Active Energy (Class1 and 2) | IS 15884:2010 | Plugs and Socket-Outlets and Alternating Current Direct Connected Static Prepayment Meters for Active Energy (Quality Control) Order, 2019, S.O. 4353(E) |
Domestic Gas Stoves for use with Liquefied Petroleum Gases 1
| Product | Indian Standard | Order |
|---|---|---|
| Domestic Gas Stoves for Use with Liquefied Petroleum Gases | IS 4246: 2002 | Domestic Gas Stoves for use with Liquefied Petroleum Gases (Quality Control) Order, 2019, S.O. 4345(E) |
Transparent Float Glass 1
| Product | Indian Standard | Order |
|---|---|---|
| Transparent Float Glass | IS 14900: 2018 | Transparent Float Glass (Quality Control) Order, 2019, S.O. 03 (E) |
Domestic Pressure Cooker 1
| Product | Indian Standard | Order |
|---|---|---|
| Domestic Pressure Cooker | IS 2347:2017 | Quality Control) Order, 2020, S.O. 294 (E) |
Cables 13
Rubber Hose for Liquefied Petroleum Gas (LPG) 2
| Product | Indian Standard | Order |
|---|---|---|
| Rubber Hose for Liquefied Petroleum Gas (LPG)- Specification Part 1 Industrial Application | IS 9573(Part 1):2017 | Rubber Hose for Liquefied Petroleum Gas (LPG) (Quality Control ) Order, 2020, S.O. 478(E) |
| Rubber Hose for Liquefied Petroleum Gas (LPG)- Specification Part 2- Domestic and Commercial Application | IS 9573(Part 2):2017 | Rubber Hose for Liquefied Petroleum Gas (LPG) (Quality Control ) Order, 2020, S.O. 478(E) |
Aluminium Foil 1
| Product | Indian Standard | Order |
|---|---|---|
| Aluminium and Aluminium Alloy Bare Foil for Food Packaging | IS 15392 | Aluminium Foil (Quality Control) Order, 2020, S.O. 687 (E) |
Non Electric Toys 6
| Product | Indian Standard | Order |
|---|---|---|
| Safety of Toys Part L Safety Aspects Related to Mechanical and Physical Properties | IS 9873 (Part 1) : 2018 | Toys (Quality Control ) Order, 2020, S.O. 853(E) |
| Safety of Toys Part 2 Flammability | IS 9873 (Part 2) : 2017 | Toys (Quality Control ) Order, 2020, S.O. 853(E) |
| Safety Requirements for Toys Part 3 Migration of Certain Elements | IS 9873 (Part 3) : 2017 | Toys (Quality Control ) Order, 2020, S.O. 853(E) |
| Safety of Toys Part 4 Swings, Slides and Similar Activity Toys for Indoor and Outdoor Family Domestic Use | IS 9873 (Part 4) : 2017 | Toys (Quality Control ) Order, 2020, S.O. 853(E) |
| Safety of Toys Part 7 Requirements and Test Methods for Finger Paints | IS 9873 (Part 7) : 2017 | Toys (Quality Control ) Order, 2020, S.O. 853(E) |
| Safety of Toys Part 9 Certain Phthalates Esters in Toys and Children’s Products | IS 9873 (Part 9) : 2017 | Toys (Quality Control ) Order, 2020, S.O. 853(E) |
Electric Toys 1
| Product | Indian Standard | Order |
|---|---|---|
| Safety of Electric Toys | IS 15644: 2006 | Toys (Quality Control ) Order, 2020, S.O. 853(E) |
Flat Transparent Sheet Glass 1
| Product | Indian Standard | Order |
|---|---|---|
| Flat Transparent Sheet Glass | IS 2835 : 1987 | Flat Transparent Sheet Glass (Quality Control ) Order, 2020, S.O. 738(E) |
Safety Glass 2
| Product | Indian Standard | Order |
|---|---|---|
| Safety Glass -Specification Part 1 Architectural, Building and General Uses | IS 2553 (Part 1):2018 | Safety Glass (Quality Control ) Order, 2020, S.O. 1045(E) |
| Safety Glass -Specification Part 2 for Road Transport | IS 2553 (Part 2):2019 | Safety Glass (Quality Control ) Order, 2020, S.O. 1045(E) |
Woven Sacks 4
| Product | Indian Standard | Order |
|---|---|---|
| Textiles –High Density Polyethylene (HDPE)/ Polypropylene (PP) Woven Sacks for Packaging of 50 Kilogram Foodgrains | IS 14887:2014 | The Textiles-High Density Polyethylene and Polypropylene woven sacks for packaging or filling (quality control) Order, 2020, S.O. 1403(E) |
| Textiles –High Density Polyethylene (HDPE)/ Polypropylene (PP) Woven Sacks for Packaging 10 Kilogram, 15 Kilogram, 20 Kilogram, 25 Kilogram, and 30 Kilogram Foodgrains | IS 16208:2015 | The Textiles-High Density Polyethylene and Polypropylene woven sacks for packaging or filling (quality control) Order, 2020, S.O. 1403(E) |
| Textiles –High Density Polyethylene (HDPE)/ Polypropylene (PP) Woven Sacks for Packaging 50 Kilogram /25 Kilogram Sugar | IS 14968:2015 | The Textiles-High Density Polyethylene and Polypropylene woven sacks for packaging or filling (quality control) Order, 2020, S.O. 1403(E) |
| Textiles –High Density Polyethylene (HDPE)/ Polypropylene (PP) Woven Sacks for Filling Sand | IS 14252:2015 | The Textiles-High Density Polyethylene and Polypropylene woven sacks for packaging or filling (quality control) Order, 2020, S.O. 1403(E) |
Butterfly Valves 1
| Product | Indian Standard | Order |
|---|---|---|
| Butterfly Valves for General Purpose | IS 13095:1991 | Butterfly valves (Quality Control) Order, 2020., S.O. 1920 (E) |
Reflectors for Bicycles 1
| Product | Indian Standard | Order |
|---|---|---|
| Retro-reflective Devices | IS/ISO 6742-2:2015 | Bicycles- Retro Reflective Devices (Quality Control) Order, 2020 ., S.O. 2290(E) |
Paper 1
| Product | Indian Standard | Order |
|---|---|---|
| Plain Copier Paper | IS 14490:2018 | Plain Copier Paper (Quality Control) Order, 2020., S.O. 2149(E) |
Cattle Feeds 1
| Product | Indian Standard | Order |
|---|---|---|
| Compounded Feeds for Cattle | IS 2052 : 2009 | FSSAI Direction vide File |
Automobile Wheel Rim Component 5
Foot Wear 29
| Product | Indian Standard | Order |
|---|---|---|
| Industrial and Protective Rubber Knee and Ankle Boots | IS 5557: 2004 | Footwear made from all-Rubber and all Polymeric material and its components (Quality Control) Order, 2020, S.O. No. 3858 (E) |
| All Rubber Gum Boots and Ankle Boots | IS 5557 (Part 2): 2018 | Footwear made from all-Rubber and all Polymeric material and its components (Quality Control) Order, 2020, S.O. No. 3858 (E) |
| Moulded Solid Rubber Soles and Heels | IS 5676: 1995 | Footwear made from all-Rubber and all Polymeric material and its components (Quality Control) Order, 2020, S.O. No. 3858 (E) |
| Rubber Microcellular Sheets for Soles and Heels | IS 6664: 1992 | Footwear made from all-Rubber and all Polymeric material and its components (Quality Control) Order, 2020, S.O. No. 3858 (E) |
| Solid PVC Soles and Heels | IS 6719: 1972 | Footwear made from all-Rubber and all Polymeric material and its components (Quality Control) Order, 2020, S.O. No. 3858 (E) |
| PVC Sandal | IS 6721: 1972 | Footwear made from all-Rubber and all Polymeric material and its components (Quality Control) Order, 2020, S.O. No. 3858 (E) |
| Rubber Hawai Chappal | IS 10702: 1992 | Footwear made from all-Rubber and all Polymeric material and its components (Quality Control) Order, 2020, S.O. No. 3858 (E) |
| Polyvinyl Chloride(PVC) Industrial Boots | IS 12254: 1993 | Footwear made from all-Rubber and all Polymeric material and its components (Quality Control) Order, 2020, S.O. No. 3858 (E) |
| Polyurethane Sole, Semirigid | IS 13893: 1994 | Footwear made from all-Rubber and all Polymeric material and its components (Quality Control) Order, 2020, S.O. No. 3858 (E) |
| Unlined Moulded Rubber Boots | IS 13995: 1995 | Footwear made from all-Rubber and all Polymeric material and its components (Quality Control) Order, 2020, S.O. No. 3858 (E) |
| Moulded Plastics Footwear- Lined or Unlined Polyurethane Boots for General Industrial Use | IS 16645: 2018 | Footwear made from all-Rubber and all Polymeric material and its components (Quality Control) Order, 2020, S.O. No. 3858 (E) |
| Footwear for Men and Women for Municipal Scavenging Work | IS 16994: 2018 | Footwear made from all-Rubber and all Polymeric material and its components (Quality Control) Order, 2020, S.O. No. 3858 (E) |
| Leather Safety Boots and Shoes for Miners | IS 1989 (Part 1): 1986 | Footwear made from Leather and other materials (Quality Control) Order, 2020, S.O. No. 3860(E) |
| Leather Safety Boots and Shoes for Heavy Metal Industries | IS 1989 (Part.2): 1986 | Footwear made from Leather and other materials (Quality Control) Order, 2020, S.O. No. 3860(E) |
| Canvas Shoes Rubber Sole | IS 3735: 1996 | Footwear made from Leather and other materials (Quality Control) Order, 2020, S.O. No. 3860(E) |
| Canvas Boots Rubber Sole | IS 3736: 1995 | Footwear made from Leather and other materials (Quality Control) Order, 2020, S.O. No. 3860(E) |
| Safety Rubber Canvas Boots for Miners | IS 3976: 2018 | Footwear made from Leather and other materials (Quality Control) Order, 2020, S.O. No. 3860(E) |
| Leather Safety Footwear Having Direct Moulded Rubber Sole | IS 11226: 1993 | Footwear made from Leather and other materials (Quality Control) Order, 2020, S.O. No. 3860(E) |
| Leather Safety Footwear with Direct Moulded Polyvinyl Chloride (PVC) Sole | IS 14544: 1998 | Footwear made from Leather and other materials (Quality Control) Order, 2020, S.O. No. 3860(E) |
| Sports Footwear for General Purpose | IS 15844(Part-1): 2023 | Footwear made from Leather and other materials (Quality Control) Order, 2020, S.O. No. 3860(E) |
| Sports Footwear for Performance Sports Footwear | IS 15844(Part-2): 2023 | Footwear made from Leather and other materials (Quality Control) Order, 2020, S.O. No. 3860(E) |
| Sports Footwear for Professional Sports Footwear | IS 15844(Part 3): 2024 | Footwear made from Leather and other materials (Quality Control) Order, 2020, S.O. No. 3860(E) |
| High Ankle Tactical Boots with PU – Rubber Sole | IS 17012: 2018 | Footwear made from Leather and other materials (Quality Control) Order, 2020, S.O. No. 3860(E) |
| Antiriot Shoes | IS 17037: 2018 | Footwear made from Leather and other materials (Quality Control) Order, 2020, S.O. No. 3860(E) |
| Shoes for Services | IS 17043 (Part-1): 2024 | Footwear made from Leather and other materials (Quality Control) Order, 2020, S.O. No. 3860(E) |
| Shoes for General Purpose | IS 17043 (Part-2): 2024 | Footwear made from Leather and other materials (Quality Control) Order, 2020, S.O. No. 3860(E) |
| Personal Protective Equipment – Part 2 Safety Footwear | IS 15298 (Part 2): 2016 | Personal Protective Equipment – Footwear (Quality Control) Order, 2020, S.O. No. 3857(E) |
| Personal Protective Equipment – Part 3 Protective Footwear | IS 15298 ( Part 3) : 2019 | Personal Protective Equipment – Footwear (Quality Control) Order, 2020, S.O. No. 3857(E) |
| Personal Protective Equipment – Part 4 Occupational Footwear | IS 15298 (Part 4) : 2017 | Personal Protective Equipment – Footwear (Quality Control) Order, 2020, S.O. No. 3857(E) |
Press Tool-Punches 3
| Product | Indian Standard | Order |
|---|---|---|
| Tools for Pressing Part 1 Round Punches with 60 Degrees Conical Head and Straight Shank | IS 4296 (Part 1):2016 | Press Tool- Punches (Quality Control) Order, 2020, S.O. No. 3994 (E) |
| Tools for Pressing Part 2 Punches with Cylindrical Head and Straight or Reduced Shank | IS 4296 (Part 2):2016 | Press Tool- Punches (Quality Control) Order, 2020, S.O. No. 3994 (E) |
| Tools for Pressing Part 3 Round Punches with 60 Degrees Conical Head and Reduced Shank | IS 4296 (Part 3):2016 | Press Tool- Punches (Quality Control) Order, 2020, S.O. No. 3994 (E) |
Helmet for riders of Two Wheeler Motor Vehicles 1
| Product | Indian Standard | Order |
|---|---|---|
| Helmet for Riders of Two Wheeler Motor Vehicles | IS 4151: 2015 | Helmet for riders of Two Wheeler Motor Vehicles (Quality Control) Order, 2020, S.O. No. 4252 (E) |
Refrigerating Appliances 2
| Product | Indian Standard | Order |
|---|---|---|
| Household Refrigerating Appliances- Characteristics and Test Methods part-1 General Requirements | IS 17550 (Part 1): 2021 | Refrigerating Appliances (Quality Control) Order, 2020, S.O. No. 4489 (E) |
| Freezers | IS 7872: 2018 | Refrigerating Appliances (Quality Control) Order, 2020, S.O. No. 4489 (E) |
Centrifugally cast (Spun) iron pipes 3
| Product | Indian Standard | Order |
|---|---|---|
| Centrifugally Cast (Spun) Iron Pressure Pipes for Water, Gas and Sewage | IS 1536: 2001 | Centrifugally Cast (Spun) Iron Pipes (Quality Control) Order, 2021, S.O. No. 116 (E) |
| Centrifugally Cast (Spun) Iron Spigot and Socket Soil, Waste, Ventilating and Rainwater Pipes, Fittings and Accessories | IS 3989: 2009 | Centrifugally Cast (Spun) Iron Pipes (Quality Control) Order, 2021, S.O. No. 116 (E) |
| Hubless Centrifugally Cast (Spun) Iron Pipes, Fittings and Accessories – Spigot Series | IS 15905: 2011 | Centrifugally Cast (Spun) Iron Pipes (Quality Control) Order, 2021, S.O. No. 116 (E) |
Flux Cored (Tubular) Electrodes 1
| Product | Indian Standard | Order |
|---|---|---|
| Flux Cored (Tubular) Electrodes for Gas Shielded and Self-Shielded Metal Welding of Carbon or Carbon- Manganese Steel | IS 15769:2008 | Flux Cored (Tubular) Electrodes (Quality Control) Order, 2021, S.O. No. 1203 (E) |
Sewing Machine 1
| Product | Indian Standard | Order |
|---|---|---|
| Household Zig-Zag Sewing Machine Head | IS 15449 : Part 1 : 2004 | Sewing Machines (Quality Control) Order, 2021, S.O. No. 1239 (E) |
Water Treatment System 1
| Product | Indian Standard | Order |
|---|---|---|
| Reverse Osmosis Based Point of Use Water Treatment System for Drinking Purposes | IS 16240 : 2023 | Environment (Protection) 115 Amendment Rules, 2021, G.S.R.724(E) |
Jute Bag 6
| Product | Indian Standard | Order |
|---|---|---|
| A- Twill Jute Bag | IS 1943:1995 | Jute Bags (Quality Control)Order, 2022, S.O. 2601(E) |
| B-twill Jute Bags for Packing Foodgrains | IS 2566:1993 | Jute Bags (Quality Control)Order, 2022, S.O. 2601(E) |
| Jute Bags for Packing 50 Kg Foodgrains | IS 12650:2018 | Jute Bags (Quality Control)Order, 2022, S.O. 2601(E) |
| Jute Bags for Packing 50 Kg Sugar | IS 15138:2010 | Jute Bags (Quality Control)Order, 2022, S.O. 2601(E) |
| Light Weight Jute Sacking Bags for Packing 50 Kg Foodgrains | IS 16186:2014 | Jute Bags (Quality Control)Order, 2022, S.O. 2601(E) |
| Jute Bags for Packing up to 30 Kg Foodgrains | IS 16372:2015 | Jute Bags (Quality Control)Order, 2022, S.O. 2601(E) |
Geo Textiles 18
Protective Textiles 11
| Product | Indian Standard | Order |
|---|---|---|
| Curtains and Drapes | IS 15741 : 2007 | Protective Textiles (Quality Control) Order, 2022, S.O. 1707(E) |
| Protective Clothing for Firefighters | IS 16890 : 2018 | Protective Textiles (Quality Control) Order, 2022, S.O. 1707(E) |
| Protective Gloves for Firefighters | IS 16874 : 2018 | Protective Textiles (Quality Control) Order, 2022, S.O. 1707(E) |
| Protective Clothing for Industrial Workers Exposed to Heat | IS 15748 : 2022 | Protective Textiles (Quality Control) Order, 2022, S.O. 1707(E) |
| Clothing Made of Limited Flame Spread Materials and Material Assemblies Affording Protection Against Heat and Flame | IS 15742 : 2007 | Protective Textiles (Quality Control) Order, 2022, S.O. 1707(E) |
| High Visibility Warning Clothes | IS 15809 : 2017 | Protective Textiles (Quality Control) Order, 2022, S.O. 1707(E) |
| Protective Clothing for Use in Welding and Allied Processes | IS 16655 : 2017 | Protective Textiles (Quality Control) Order, 2022, S.O. 1707(E) |
| Tactical 3 Point Sling | IS 16725 : 2018 | Protective Textiles (Quality Control) Order, 2022, S.O. 1707(E) |
| Pouch for Ammunition and Grenades Made of Disruptive Pattern nylon-66 | IS 16726 : 2018 | Protective Textiles (Quality Control) Order, 2022, S.O. 1707(E) |
| Bullet Resistant Jackets | IS 17051 : 2018 | Protective Textiles (Quality Control) Order, 2022, S.O. 1707(E) |
| Water-proof Multipurpose Rain Poncho | IS 17286 : 2019 | Protective Textiles (Quality Control) Order, 2022, S.O. 1707(E) |
Upholstered Composites used for Non-Domestic Furniture 1
| Product | Indian Standard | Order |
|---|---|---|
| Upholstered Composites Used for Non-domestic Furniture | IS 15768 : 2008 | Protective Textiles Quality Control (Upholstered Composites used for Non-Domestic Furniture) Order, 2024, S.O. 3916(E) |
Flame- Producing Lighters 2
| Product | Indian Standard | Order |
|---|---|---|
| Lighters- Safety Specifications | IS/ISO 9994:2018 | Flame- Producing Lighters (Quality Control) Order, 2023, S.O. 2986(E) |
| Utility Lighters – Safety Specifications | IS/ISO 22702:2018 | Flame- Producing Lighters (Quality Control) Order, 2023, S.O. 2986(E) |
Potable Water Bottles 1
| Product | Indian Standard | Order |
|---|---|---|
| Potable Water Bottles (Copper, Stainless Steel, Aluminum) | IS 17803: 2022 | Potable Water Bottles (Quality Control) Order, 2023, S.O. 2988(E) |
Welding Rods and Electrodes 2
| Product | Indian Standard | Order |
|---|---|---|
| Covered Electrodes for Manual Metal Arc Welding of Carbon and Carbon Manganese Steel | IS 814 : 2004 | Welding Rods and Electrodes (Quality Control) Order, 2023, S.O. 3153(E) |
| Welding Rode and Bare Electrodes for Gas Shielded Arc Welding of Structural Steel | IS 6419 : 1996 | Welding Rods and Electrodes (Quality Control) Order, 2023, S.O. 3153(E) |
Smart Meters 2
| Product | Indian Standard | Order |
|---|---|---|
| A.C. Static Direct Connected Watt Hour Smart Meter Class 1 and 2 | IS 16444 Part 1 | 79 . Smart Meters (Quality Control) Order, 2023, S.O. 3154(E) |
| A.C. Static Transformer Operated Watt Hour and Var-Hour Smart Meters, Class 0.2S, 0.5S and 1.0S | IS 16444 Part 2 | 79 . Smart Meters (Quality Control) Order, 2023, S.O. 3154(E) |
Insulated Flask, Bottles and Containers for Domestic Use 3
| Product | Indian Standard | Order |
|---|---|---|
| Insulated Flask for Domestic Use | IS 17790 : 2022 | Insulated Flask, Bottles and Containers for Domestic Use (Quality Control) Order, 2023, S.O. 3140(E) |
| Domestic Stainless Steel Vacuum Flask/bottle | IS 17526 : 2021 | Insulated Flask, Bottles and Containers for Domestic Use (Quality Control) Order, 2023, S.O. 3140(E) |
| Insulated Container for Food Storage | IS 17569: 2021 | Insulated Flask, Bottles and Containers for Domestic Use (Quality Control) Order, 2023, S.O. 3140(E) |
Resin Treated Compressed Wood Laminates 3
| Product | Indian Standard | Order |
|---|---|---|
| Resin Treated Compressed Wood Laminates (compregs) – for Electrical Purposes | IS 3513 (Part 1) : 1989 | Resin treated compressed wood laminates (Quality Control) Order, 2023, S.O. 3139(E) |
| Resin Treated Compressed Wood Laminates (compregs) – for Chemical Purposes | IS 3513 (Part 2) : 1989 | Resin treated compressed wood laminates (Quality Control) Order, 2023, S.O. 3139(E) |
| Resin Treated Compressed Wood Laminates (compregs) – for General Purposes | IS 3513 (Part 3) : 1989 | Resin treated compressed wood laminates (Quality Control) Order, 2023, S.O. 3139(E) |
Bolts, Nuts and Fasteners 19
Cookware, Utensils and Cans for food and beverages 5
| Product | Indian Standard | Order |
|---|---|---|
| Stainless Steel Cookware | IS 14756 : 2022 | Cookware and Utensils (Quality Control) Order, 2023, S.O. 3583(E) |
| Wrought Aluminium Utensils | IS 1660:2024 | Cookware and Utensils (Quality Control) Order, 2023, S.O. 3583(E) |
| Stainless Steel Sinks for Domestic Purposes | IS 13983:1994 | Cookware and Utensils (Quality Control) Order, 2023, S.O. 3583(E) |
| Three Piece Round Open Top Metal Cans for Foods and Beverages | IS 18427:2024 | Cookware and Utensils (Quality Control) Order, 2023, S.O. 3583(E) |
| Aluminium Cans for Beverages | IS 14407:2023 | Cookware and Utensils (Quality Control) Order, 2023, S.O. 3583(E) |
Domestic Gas Stoves for use with PNG 1
| Product | Indian Standard | Order |
|---|---|---|
| Domestic Gas Stoves for Use with Piped Natural Gas (PNG) | IS 17153:2019 | Domestic Gas Stoves for use with Piped Natural Gas (Quality Control) Order, 2023, S.O. 3584(E) |
Fire Extinguishers 2
| Product | Indian Standard | Order |
|---|---|---|
| Portable Fire Extinguishers | IS 15683 : 2018 | Fire Extinguishers (Quality Control) Order, 2023, S.O. 3585(E) |
| Wheeled Fire Extinguishers | IS 16018:2012 | Fire Extinguishers (Quality Control) Order, 2023, S.O. 3585(E) |
Electric Ceiling Type Fans 1
| Product | Indian Standard | Order |
|---|---|---|
| Electric Ceiling Type Fans | IS 374:2019 | Electric Ceiling Type Fans (Quality Control) Order, 2023, S.O. 3641(E) |
Wood Based Boards 5
| Product | Indian Standard | Order |
|---|---|---|
| Block Boards | IS 1659:2004 | Wood Based Boards (Quality Control) Order, 2023, S.O. 3604(E) |
| Prelaminated Particle Boards from Wood and Other Lignocellulosic Material | IS 12823:2015 | Wood Based Boards (Quality Control) Order, 2023, S.O. 3604(E) |
| Particle Boards of Wood and Other Lignocellulosic Materials (medium Density) for General Purpose | IS 3087:2005 | Wood Based Boards (Quality Control) Order, 2023, S.O. 3604(E) |
| Medium Density Fibre Boards for General Purpose | IS 12406:2021 | Wood Based Boards (Quality Control) Order, 2023, S.O. 3604(E) |
| Veneered Particle Boards | IS 3097:2006 | Wood Based Boards (Quality Control) Order, 2023, S.O. 3604(E) |
Cast Iron Products 6
| Product | Indian Standard | Order |
|---|---|---|
| Cast Iron Man Hole Covers and Frames | IS 1726:1991 | Cast Iron Products (Quality Control) Order, 2023, S.O. 3806(E) |
| Cast Iron/ductile Iron Drainage Pipes and Pipe Fittings for Over Ground Non-pressure Pipelines Socket and Spigot Series | IS 1729:2002 | Cast Iron Products (Quality Control) Order, 2023, S.O. 3806(E) |
| Malleable Cast Iron Pipe Fittings | IS 1879:2010 | Cast Iron Products (Quality Control) Order, 2023, S.O. 3806(E) |
| Cast Iron Single Faced Thimble Mounted Sluice Gates | IS 13349:1992 | Cast Iron Products (Quality Control) Order, 2023, S.O. 3806(E) |
| Grey Iron Castings | IS 210:2009 | Cast Iron Products (Quality Control) Order, 2023, S.O. 3806(E) |
| Vertically Cast – Iron Pressure Pipes for Water, Gas and Sewage | IS 1537:1976 | Cast Iron Products (Quality Control) Order, 2023, S.O. 3806(E) |
Solar DC Cable and Fire Survival Cable 2
| Product | Indian Standard | Order |
|---|---|---|
| Electric Cable for Photovoltic Systems for Rated Voltage 1500V DC | IS 17293:2020 | Solar DC Cable and Fire Survival Cable (Quality Control) Order, 2023, S.O. 3807(E) |
| Thermosetting Insulated, Fire Survival Cables for Working Voltage Upto and Including 1100V AC and 1500V DC | IS 17505(Part 1): 2021 | Solar DC Cable and Fire Survival Cable (Quality Control) Order, 2023, S.O. 3807(E) |
Plywood and Wooden flush door shutters 10
| Product | Indian Standard | Order |
|---|---|---|
| Plywood for General Purposes | IS 303 : 1989 | Plywood and Wooden flush door shutters (Quality Control) Order, 2023, S.O. 3841(E) |
| Wooden Flush Door Shutters (solid Core Type) – Plywood Face Panels | IS 2202 (Part 1) : 1999 | Plywood and Wooden flush door shutters (Quality Control) Order, 2023, S.O. 3841(E) |
| Marine Plywood | IS 710 : 2010 | Plywood and Wooden flush door shutters (Quality Control) Order, 2023, S.O. 3841(E) |
| Fire Retardant Plywood | IS 5509 : 2021 | Plywood and Wooden flush door shutters (Quality Control) Order, 2023, S.O. 3841(E) |
| Veneered Decorative Plywood | IS 1328 : 1996 | Plywood and Wooden flush door shutters (Quality Control) Order, 2023, S.O. 3841(E) |
| Wooden Flush Door Shutters (cellular and Hollow Core Type) – Particle Board and Hardboard Face Panels | IS 2191 (Part 2): 2022 | Plywood and Wooden flush door shutters (Quality Control) Order, 2023, S.O. 3841(E) |
| Wooden Flush Door Shutters (cellular and Hollow Core Type) – Plywood Face Panels | IS 2191 (Part 1): 2022 | Plywood and Wooden flush door shutters (Quality Control) Order, 2023, S.O. 3841(E) |
| Wooden Flush Door Shutters (Solid Core Type) – Particle Board, High Density Fibre Board, Medium Density Fibre Board and Fibre Hardboard Face Panels | IS 2202 (Part 2): 2022 | Plywood and Wooden flush door shutters (Quality Control) Order, 2023, S.O. 3841(E) |
| Plywood for Concrete Shuttering Works | IS 4990 : 2011 | Plywood and Wooden flush door shutters (Quality Control) Order, 2023, S.O. 3841(E) |
| Structural Plywood | IS 10701 : 2012 | Plywood and Wooden flush door shutters (Quality Control) Order, 2023, S.O. 3841(E) |
Miscellaneous Steel Products 4
| Product | Indian Standard | Order |
|---|---|---|
| Bar or Wire Wrapped Steel Cylinder Pipes with Mortar Lining and Coating Including Specials | IS 15155 : 2020 | Miscellaneous Steel Products (Quality Control) Order, 2023, S.O. 4240(E) |
| High Strength Deformed Stainless Steel Bars and Wires for Concrete Reinforcement | IS 16651 : 2017 | Miscellaneous Steel Products (Quality Control) Order, 2023, S.O. 4240(E) |
| Steel Pipe Flanges | IS 6392 : 2020 | Miscellaneous Steel Products (Quality Control) Order, 2023, S.O. 4240(E) |
| Stainless Steel Tubes for the Food and Beverage Industry | IS 6913 : 1973 | Miscellaneous Steel Products (Quality Control) Order, 2023, S.O. 4240(E) |
Aluminium and Aluminium Alloy Products 17
| Product | Indian Standard | Order |
|---|---|---|
| Aluminium Alloy Tubes for Irrigation Purposes -welded Tubes | IS 7092 (Part 1):1992 | Aluminium and Aluminium Alloy Products (Quality Control) Order, 2023, S.O. 4241(E) |
| Aluminium Alloy Tube for Irrigation Purposes – Extruded Tube | IS 7092 (Part 2):1987 | Aluminium and Aluminium Alloy Products (Quality Control) Order, 2023, S.O. 4241(E) |
| EC Grade Aluminium Rod Produced by Continuous Casting and Rolling | IS 5484:1997 | Aluminium and Aluminium Alloy Products (Quality Control) Order, 2023, S.O. 4241(E) |
| Wrought Aluminium and Aluminium Alloy Bars, Rods and Sections (For General Engineering Purposes) | IS 733:1983 | Aluminium and Aluminium Alloy Products (Quality Control) Order, 2023, S.O. 4241(E) |
| Wrought Aluminium and Aluminium Alloys, Forging Stock and Forgings for General Engineering Purposes | IS 734:1975 | Aluminium and Aluminium Alloy Products (Quality Control) Order, 2023, S.O. 4241(E) |
| Wrought Aluminium and Aluminium Alloy Plate for General Engineering Purposes | IS 736:1986 | Aluminium and Aluminium Alloy Products (Quality Control) Order, 2023, S.O. 4241(E) |
| Wrought Aluminium and Aluminium Alloy Sheet and Strip for General Engineering Purposes | IS 737:2008 | Aluminium and Aluminium Alloy Products (Quality Control) Order, 2023, S.O. 4241(E) |
| Wrought Aluminium and Aluminium Alloy Wire for General Engineering Purposes | IS 739:1992 | Aluminium and Aluminium Alloy Products (Quality Control) Order, 2023, S.O. 4241(E) |
| Wrought Aluminium and Aluminium Alloy Rivet Stock for General Engineering Purposes | IS 740:1977 | Aluminium and Aluminium Alloy Products (Quality Control) Order, 2023, S.O. 4241(E) |
| Wrought Aluminium and Aluminium Alloy Bars, Rods, Tubes, Sections, Plates and Sheets for Electrical Applications | IS 5082:1998 | Aluminium and Aluminium Alloy Products (Quality Control) Order, 2023, S.O. 4241(E) |
| Aluminium and Aluminium Alloy Foil for Pharmaceutical Packaging | IS 16011:2012 | Aluminium and Aluminium Alloy Products (Quality Control) Order, 2023, S.O. 4241(E) |
| Aluminium Composite Panel | IS 17682:2021 | Aluminium and Aluminium Alloy Products (Quality Control) Order, 2023, S.O. 4241(E) |
| Wrought Aluminium and Aluminium Alloys- Extruded Round Tube and Hollow Sections for General Engineering Purposes | IS 1285:2002 | Aluminium and Aluminium Alloy Products (Quality Control) Order, 2023, S.O. 4241(E) |
| Wrought Aluminium Wire for Electrical Purposes | IS 2067:1975 | Aluminium and Aluminium Alloy Products (Quality Control) Order, 2023, S.O. 4241(E) |
| Wrought Aluminium and Aluminium Alloys for Manufacture of Utensils | IS 21:1992 | Aluminium and Aluminium Alloy Products (Quality Control) Order, 2023, S.O. 4241(E) |
| Corrugated Aluminium Sheet | IS 1254:2007 | Aluminium and Aluminium Alloy Products (Quality Control) Order, 2023, S.O. 4241(E) |
| Aluminium Alloy Forging Stock and Forgings (Alloy 24345) for Aerospace Applications | IS 7902:2001 | Aluminium and Aluminium Alloy Products (Quality Control) Order, 2023, S.O. 4241(E) |
Precision Roller and Bush Chains, attachments and associated chain sprockets 1
| Product | Indian Standard | Order |
|---|---|---|
| Short – Pitch Transmission Precision Roller and Bush Chains, Attachments and Associated Chain Sprockets | IS 2403 :2014 / ISO 606 : 2004 | Precision Roller and Bush Chains, attachments and associated chain sprockets (Quality Control) Order, 2023, S.O. 4242(E) |
Self- Contained Drinking Water Coolers 1
| Product | Indian Standard | Order |
|---|---|---|
| Self- Contained Drinking Water Coolers – Energy Consumption and Performance | IS 1475 (Part 1) : 2001 | Self- Contained Drinking Water Coolers (Quality Control) Order, 2023, S.O. 4243(E) |
Medical Textiles 6
| Product | Indian Standard | Order |
|---|---|---|
| Sanitary Napkins | IS 5405 : 2019 | Medical Textiles (Quality Control) Order, 2023, S.O. 4247(E) |
| Disposable Baby Diaper | IS 17509 : 2021 | Medical Textiles (Quality Control) Order, 2023, S.O. 4247(E) |
| Reusable Sanitary Pad/ Sanitary Napkin/ Period Panties | IS 17514 : 2021 | Medical Textiles (Quality Control) Order, 2023, S.O. 4247(E) |
| Shoe Covers | IS 17349 : 2020 | Medical Textiles (Quality Control) Order, 2023, S.O. 4247(E) |
| Dental Bib or Napkins | IS 17354 : 2020 | Medical Textiles (Quality Control) Order, 2023, S.O. 4247(E) |
| Bed Sheet and Pillow Cover | IS 17630 : 2021 | Medical Textiles (Quality Control) Order, 2023, S.O. 4247(E) |
Agro Textiles 20
Copper Products 9
| Product | Indian Standard | Order |
|---|---|---|
| Copper Wire Rods for Electrical Applications | IS 12444:2020 | Copper Products (Quality Control) Order, 2023, S.O. 4595(E) |
| Copper Rods and Bars for Electrical Purposes | IS 613:2000 | Copper Products (Quality Control) Order, 2023, S.O. 4595(E) |
| Copper Strip for Electrical Purposes | IS 1897:2008 | Copper Products (Quality Control) Order, 2023, S.O. 4595(E) |
| Copper Rods and Bars for General Engineering Purposes | IS 4171:1983 | Copper Products (Quality Control) Order, 2023, S.O. 4595(E) |
| Solid Drawn Copper and Copper Alloy Tubes for Condensers and Heat Exchangers | IS 1545: 1994 | Copper Products (Quality Control) Order, 2023, S.O. 4595(E) |
| Solid Drawn Copper Tubes for General Engineering Purposes | IS 2501: 1995 | Copper Products (Quality Control) Order, 2023, S.O. 4595(E) |
| Copper Tubes for Plumbing | IS 14810: 2000 | Copper Products (Quality Control) Order, 2023, S.O. 4595(E) |
| Wrought Copper Tubes for Refrigeration and Air- Conditioning Purpose | IS 10773:1995 | Copper Products (Quality Control) Order, 2023, S.O. 4595(E) |
| Copper Wires for General Engineering Purposes | IS 4412:1981 | Copper Products (Quality Control) Order, 2023, S.O. 4595(E) |
Drums and Tins 7
| Product | Indian Standard | Order |
|---|---|---|
| Drums, Large Open Top | IS 13997:2014 | Drums and Tins (Quality Control) Order, 2023, S.O. 4596(E) |
| Drums Large, Fixed Ends – Grade a | IS 1783 (Part 1) :2014 | Drums and Tins (Quality Control) Order, 2023, S.O. 4596(E) |
| Drums, Large, Fixed Ends – Grade | IS 1783 (Part 2) :2014 | Drums and Tins (Quality Control) Order, 2023, S.O. 4596(E) |
| Steel Drums (Galvanized and Ungalvanized) | IS 2552:1989 | Drums and Tins (Quality Control) Order, 2023, S.O. 4596(E) |
| Bitumen Drums | IS 3575:1993 | Drums and Tins (Quality Control) Order, 2023, S.O. 4596(E) |
| Square Tins for Solid Products | IS 916:2000 | Drums and Tins (Quality Control) Order, 2023, S.O. 4596(E) |
| Square Tins – 15 Kilograms or Litre for Ghee, Vanaspati, Edible Oils and Bakery | IS 10325:2000 | Drums and Tins (Quality Control) Order, 2023, S.O. 4596(E) |
Door Fittings 7
| Product | Indian Standard | Order |
|---|---|---|
| Door Closers (pneumatically Regulated) for Light Doors Weighing up to 40 kg | IS 6343:1982 | Door Fittings (Quality Control) Order, 2023, S.O. 4646(E) |
| Door Closers, Concealed Type (hydraulically Regulated) | IS 14912:2001 | Door Fittings (Quality Control) Order, 2023, S.O. 4646(E) |
| Hydraulically Regulated Door Closers | IS 3564:1995 | Door Fittings (Quality Control) Order, 2023, S.O. 4646(E) |
| Floor Springs (hydraulically Regulated) for Heavy Doors | IS 6315:1992 | Door Fittings (Quality Control) Order, 2023, S.O. 4646(E) |
| Rim Latches | IS 1019:1974 | Door Fittings (Quality Control) Order, 2023, S.O. 4646(E) |
| Door Handles | IS 208:2020 | Door Fittings (Quality Control) Order, 2023, S.O. 4646(E) |
| Door Handles for Mortice Lock (vertical Type) | IS 4992:1975 | Door Fittings (Quality Control) Order, 2023, S.O. 4646(E) |
Bottled Water Dispenser 1
| Product | Indian Standard | Order |
|---|---|---|
| Bottled Water Dispensers | IS 17681:2022 | Bottled Water Dispenser (Quality Control) Order, 2023, S.O. 4647(E) |
Helmet for Police Force, Civil Defence and Personal Protection 3
| Product | Indian Standard | Order |
|---|---|---|
| Non-metal Helmet for Firemen and Civil Defence Personnel | IS 2745:1983 | Helmet for Police Force, Civil Defence and Personal Protection (Quality Control) Order, 2023, S.O. 4649(E) |
| Industrial Safety Helmets | IS 2925:1984 | Helmet for Police Force, Civil Defence and Personal Protection (Quality Control) Order, 2023, S.O. 4649(E) |
| Non- Metal Helmet for Police Force | IS 9562:1980 | Helmet for Police Force, Civil Defence and Personal Protection (Quality Control) Order, 2023, S.O. 4649(E) |
Steel Wires or Strands, Nylon or Wire Ropes and Wire mesh 9
| Product | Indian Standard | Order |
|---|---|---|
| Steel Wire Ropes for General Engineering Purposes | IS 2266 : 2019 | Steel Wires or Strands, Nylon or Wire Ropes and Wire mesh (Quality Control) Order, 2023, S.O. 5022(E) |
| Steel Wire Suspension Ropes for Lifts, Elevators and Hoists | IS 2365 : 2018 | Steel Wires or Strands, Nylon or Wire Ropes and Wire mesh (Quality Control) Order, 2023, S.O. 5022(E) |
| Stranded Steel Wire Ropes for Winding and Man –riding Haulages in Mines | IS 1855:2022 | Steel Wires or Strands, Nylon or Wire Ropes and Wire mesh (Quality Control) Order, 2023, S.O. 5022(E) |
| Steel Wire Rope Forhaulage | IS 1856:2005 | Steel Wires or Strands, Nylon or Wire Ropes and Wire mesh (Quality Control) Order, 2023, S.O. 5022(E) |
| Hot Dip Galvanized Stay Strand | IS 2141:20005 | Steel Wires or Strands, Nylon or Wire Ropes and Wire mesh (Quality Control) Order, 2023, S.O. 5022(E) |
| Wire Ropes Used in Oil Wells and Oil Well Drilling | IS 4521:2001 | Steel Wires or Strands, Nylon or Wire Ropes and Wire mesh (Quality Control) Order, 2023, S.O. 5022(E) |
| Braided Nylon Ropes for Mountaineering Purposes | IS 6590:1972 | Steel Wires or Strands, Nylon or Wire Ropes and Wire mesh (Quality Control) Order, 2023, S.O. 5022(E) |
| Galvanized Steel Barbed Wire for Fencing | IS 278:2009 | Steel Wires or Strands, Nylon or Wire Ropes and Wire mesh (Quality Control) Order, 2023, S.O. 5022(E) |
| Mechanically Woven, Double- Twisted, Hexagonal Wire Mesh Gabions, Revet Mattresses and Rock Fall Netting and Other Rock Fall Netting and Other Products for Civil Engineering Purposes (Galvanized Steel Wire or Galvanized Steel Wire with Polymer Coating) | IS 16014:2018 | Steel Wires or Strands, Nylon or Wire Ropes and Wire mesh (Quality Control) Order, 2023, S.O. 5022(E) |
Material Measure of length 2
| Product | Indian Standard | Order |
|---|---|---|
| Legal Metrology – Material Measure of Length – Woven Metallic and Glass Fibre Tape Measures | IS 1269(Part 1) : 1997 | Legal Metrology – Material Measures of Length (Quality Control) Order, 2023, S.O. 5029(E) |
| Legal Metrology – Material Measure of Length – Steel Tape Measures | IS 1269(Part 2) : 1997 | Legal Metrology – Material Measures of Length (Quality Control) Order, 2023, S.O. 5029(E) |
Polyethylene Woven Sacks 5
| Product | Indian Standard | Order |
|---|---|---|
| Textiles—High Density Polyethylene (HDPE) /Polypropylene (PP) Woven Sacks for Packaging Fertilizers | IS 9755 : 2021 | Textiles—High Density Polyethylene (HDPE) /Polypropylene (PP) Woven Sacks for Packaging Fertilizers (Quality Control) Order, 2023, S.O. 5177(E) |
| Textiles — High Density Polyethylene (HDPE)/ Polypropylene (PP) Woven Sacks for Packaging of 50 kg Cement | IS 11652 : 2017 | Textiles—High Density Polyethylene (HDPE) /Polypropylene (PP) Woven Sacks for Packaging of 50 kg Cement (Quality Control) Order, 2023, S.O. 5178(E) |
| Textiles — Polypropylene (PP) Woven, Laminated, Block Bottom Valve Sacks for Packaging of 50 kg Cement | IS 16709 : 2017 | Textiles—Polypropylene (PP) Woven, Laminated, Block Bottom Valve Sacks for Packaging of 50 kg Cement (Quality Control) Order, 2023, S.O. 5179(E) |
| Textiles — High Density Polyethylene (HDPE) Polypropylene (PP) Woven Sacks for Packaging of 25 kg Polymer Materials | IS 16703 : 2017 | Textiles— High Density Polyethylene (HDPE) Polypropylene (PP) Woven Sacks for Packaging of 25 kg Polymer Materials (Quality Control) Order, 2023, S.O. 5180(E) |
| Textiles — Polypropylene (PP)/ High Density Polyethylene (HDPE) Laminated Woven Sacks for Mail Sorting, Storage, Transport and Distribution | IS 17399 : 2020 | Textiles— Polypropylene (PP)/High Density Polyethylene (HDPE) Laminated Woven Sacks for Mail Sorting, Storage, Transport and Distribution (Quality Control) Order, 2023, S.O. 5181(E) |
Safes, Safe Deposit Locker Cabinets and key locks 3
| Product | Indian Standard | Order |
|---|---|---|
| Safes | IS 550 (Part 1) : 2014 | Safes, Safe Deposit Locker Cabinets and key locks (Quality Control) Order, 2023, S.O. 5293(E) |
| Safe Deposit Locker Cabinets | IS 5244 : 2020 | Safes, Safe Deposit Locker Cabinets and key locks (Quality Control) Order, 2023, S.O. 5293(E) |
| Key Locks for Security Equipment | IS 17566 : 2021 | Safes, Safe Deposit Locker Cabinets and key locks (Quality Control) Order, 2023, S.O. 5293(E) |
Hinges 9
| Product | Indian Standard | Order |
|---|---|---|
| Stainless Steel Butt Hinges | IS 12817:2020 | Hinges (Quality Control) Order, 2023, S.O. 5294(E) |
| Steel Butt Hinges | IS 1341:2018 | Hinges (Quality Control) Order, 2023, S.O. 5294(E) |
| Non-ferrous Metal Butt Hinges | IS 205:1992 | Hinges (Quality Control) Order, 2023, S.O. 5294(E) |
| Tee and Strap Hinges | IS 206:2010 | Hinges (Quality Control) Order, 2023, S.O. 5294(E) |
| Parliament Hinges | IS 362:1991 | Hinges (Quality Control) Order, 2023, S.O. 5294(E) |
| Continuous (Piano) Hinges | IS 3818:1992 | Hinges (Quality Control) Order, 2023, S.O. 5294(E) |
| Steel Back Flap Hinges | IS 3843:1995 | Hinges (Quality Control) Order, 2023, S.O. 5294(E) |
| Double-acting Spring Hinges | IS 453:1993 | Hinges (Quality Control) Order, 2023, S.O. 5294(E) |
| Cabinet Hinges | IS 18297:2023 | Hinges (Quality Control) Order, 2023, S.O. 5294(E) |
Cycle and Rickshaw Tyres and Tubes 2
| Product | Indian Standard | Order |
|---|---|---|
| Cycle and Rickshaw Pneumatic Tyres | IS 2414:2005 | Cycle and Rickshaw Tyres and Tubes (Quality Control) Order, 2023, S.O. 5323(E) |
| Cycle – Rubber Tubes (Moulded or Jointed) | IS 2415 :2015 | Cycle and Rickshaw Tyres and Tubes (Quality Control) Order, 2023, S.O. 5323(E) |
Rubber Gaskets for Pressure Cookers 1
| Product | Indian Standard | Order |
|---|---|---|
| Rubber Gaskets for Pressure Cookers | IS 7466 :1994 | Rubber Gaskets for Pressure Cookers (Quality Control) Order, 2023, S.O. 5371(E) |
Laboratory Glassware 5
| Product | Indian Standard | Order |
|---|---|---|
| Laboratory Glassware – Graduated Measuring Cylinders | IS 878 :2008 | Laboratory Glassware (Quality Control) Order, 2023, S.O. 44(E) |
| Laboratory Glassware – One – Mark Volumetric Flasks | IS 915:2012 | Laboratory Glassware (Quality Control) Order, 2023, S.O. 44(E) |
| Laboratory Glassware – Narrow-necked Boiling Flasks | IS 1381 (Part 1):2003 | Laboratory Glassware (Quality Control) Order, 2023, S.O. 44(E) |
| Laboratory Glassware – Single Volume Pipettes | IS 1117:2018 | Laboratory Glassware (Quality Control) Order, 2023, S.O. 44(E) |
| Glass Beakers | IS 2619:2018 | Laboratory Glassware (Quality Control) Order, 2023, S.O. 44(E) |
Electrical Accessories 8
Diesel Engines – NOx Reduction Agent AUS 32 1
| Product | Indian Standard | Order |
|---|---|---|
| Diesel Engines – NOx Reduction Agent AUS 32 | IS 17042 (Part-1): 2018 | Diesel Engines – NOx Reduction Agent AUS 32 (Quality Control) Order, 2024, S.O. 922(E) |
Air Cooler and Air Filters 2
| Product | Indian Standard | Order |
|---|---|---|
| Evaporative Air Coolers (Desert Coolers) | IS 3315:2019 | Air Cooler and Air Filters (Quality Control) Order, 2023, S.O. 1114(E) |
| Air Filters for General Ventilation – Technical Specifications Requirements and Classification System Based Upon Particulate Matter Efficiency (ePM) | IS 17570 (Part 1): 2021 ISO 16890-2: 2016 | Air Cooler and Air Filters (Quality Control) Order, 2023, S.O. 1114(E) |
Electrical Appliances 6
| Product | Indian Standard | Order |
|---|---|---|
| Toasters, Grills, Roasters and Similar Appliances | IS 302 (Part 2/Sec 9): 2009 | Electrical Appliances for Kitchen (Quality Control) Order, 2023, S.O. 1128(E) |
| Range Hoods | IS 302 (Part 2/Sec 31): 2009 | Electrical Appliances for Kitchen (Quality Control) Order, 2023, S.O. 1128(E) |
| Appliances for Skin or Hair Care | IS 302 (Part 2/Sec 23): 2009 | Electrical Appliances for Skin or Hair care (Quality Control) Order, 2023, S.O. 1125(E) |
| Fans | IS 302 (Part 2/ Sec 80): 2017 | Electrical appliance fans (Quality Control) Order, 2023, S.O. 1124(E) |
| Commercial Dispensing Appliances and Vending Machines | IS 302 (Part 2/Sec 75): 2018 | Electrical appliance for commercial dispensing and vending (Quality Control) Order, 2023, S.O. 1127(E) |
| Domestic Electric Clothes Washing Machines | IS 302 (Part 2/Sec 7): 2010 | Electrical appliance for domestic clothes washing (Quality Control) Order, 2023, S.O. 1126(E) |
Asbestos or Fibre Cement based Products 11
| Product | Indian Standard | Order |
|---|---|---|
| Corrugated and Semi – Corrugated Asbestos Cement Sheets | IS 459:1992 | Asbestos or Fibre Cement based Products (Quality Control) Order, 2024, S.O. 1152(E) |
| Asbestos Cement Pressure Pipes and Joints | IS 1592:2003 | Asbestos or Fibre Cement based Products (Quality Control) Order, 2024, S.O. 1152(E) |
| Asbestos Cement Flat Sheets | IS 2096:1992 | Asbestos or Fibre Cement based Products (Quality Control) Order, 2024, S.O. 1152(E) |
| Asbestos Cement Building Boards | IS 2098:1997 | Asbestos or Fibre Cement based Products (Quality Control) Order, 2024, S.O. 1152(E) |
| Asbestos – Cement Pipes and Fittings for Sewerage and Drainage | IS 6908:1991 | Asbestos or Fibre Cement based Products (Quality Control) Order, 2024, S.O. 1152(E) |
| Silica-Asbestos-Cement Flat Sheets | IS 13000:1990 | Asbestos or Fibre Cement based Products (Quality Control) Order, 2024, S.O. 1152(E) |
| Asbestos Cement Cable Conduits and Troughs | IS 8870:1978 | Asbestos or Fibre Cement based Products (Quality Control) Order, 2024, S.O. 1152(E) |
| Asbestos Cement Pressure Pipes (Light Duty) | IS 9627:1980 | Asbestos or Fibre Cement based Products (Quality Control) Order, 2024, S.O. 1152(E) |
| Shallow Corrugated Asbestos Cement Sheets | IS 13008:1990 | Asbestos or Fibre Cement based Products (Quality Control) Order, 2024, S.O. 1152(E) |
| Fibre Cement Flat Sheets | IS 14862:2000 | Asbestos or Fibre Cement based Products (Quality Control) Order, 2024, S.O. 1152(E) |
| Fibre Reinforced Cement Products – Long Corrugated or Asymmetrical Section Sheets and Fittings for Roofing and Cladding | IS 14871:2000 | Asbestos or Fibre Cement based Products (Quality Control) Order, 2024, S.O. 1152(E) |
Water meters and accessories 3
| Product | Indian Standard | Order |
|---|---|---|
| Water Meters (bulk Type) | IS 2373:1981 | Water meters and accessories (Quality Control) Order, 2023, S.O. 1142(E) |
| Water Meters (domestic Type) | IS 779: 1994 | Water meters and accessories (Quality Control) Order, 2023, S.O. 1142(E) |
| Ferrules for Water Services | IS 2692: 1989 | Water meters and accessories (Quality Control) Order, 2023, S.O. 1142(E) |
Gypsum based Building Materials 4
| Product | Indian Standard | Order |
|---|---|---|
| Gypsum Plaster Boards – Specification: Part 1 Plain Gypsum Plaster Boards | IS 2095 (Part 1):2011 | Gypsum based Building Materials (Quality Control) Order, 2024, S.O. 1153(E) |
| Glass Fibre Reinforced Gypsum Panels | IS 17400:2021 | Gypsum based Building Materials (Quality Control) Order, 2024, S.O. 1153(E) |
| Gypsum Plaster Boards – Coated/ Laminated Gypsum Plaster Boards | IS 2095 (Part 2): 2022 | Gypsum based Building Materials (Quality Control) Order, 2024, S.O. 1153(E) |
| Gypsum Plaster Boards – Reinforced Gypsum Plaster Boards and Ceiling Tiles | IS 2095 (Part 3):2022 | Gypsum based Building Materials (Quality Control) Order, 2024, S.O. 1153(E) |
Electrical Appliances for domestic water heating 5
| Product | Indian Standard | Order |
|---|---|---|
| Appliances for Stationary Storage Type Electric Water Heaters | IS 302 (Part 2/Sec 21): 2018 | Electrical Appliances for domestic water heating (Quality Control) Order, 2023, S.O. 1253(E) |
| Appliances for Electric Instantaneous Water Heaters | IS 302 (Part 2/Sec 35): 2017 | Electrical Appliances for domestic water heating (Quality Control) Order, 2023, S.O. 1253(E) |
| Electric Immersion Water Heaters | IS 368: 2014 | Electrical Appliances for domestic water heating (Quality Control) Order, 2023, S.O. 1253(E) |
| Stationary Storage Type Electric Water Heaters | IS 2082: 2018 | Electrical Appliances for domestic water heating (Quality Control) Order, 2023, S.O. 1253(E) |
| Mini Domestic Water Heater for Use with Piped Natural Gas (PNG)s | IS 17150: 2019 | Electrical Appliances for domestic water heating (Quality Control) Order, 2023, S.O. 1253(E) |
V-Belt 3
| Product | Indian Standard | Order |
|---|---|---|
| V-Belts – Endless V-Belts for Industrial Purposes – General Purpose | IS 2494 (Part 1): 1994 | V-Belt (Quality Control) Order, 2024, S.O. 1252(E) |
| V-Belts – Endless V-Belts for Industrial Purposes – Fire Resistant and Antistatic V-Belts | IS 2494 (Part 2): 1993 | V-Belt (Quality Control) Order, 2024, S.O. 1252(E) |
| Transmission Devices – V – Belts Endless Narrow V-Belts for Industrial Use | IS 14261: 1995 | V-Belt (Quality Control) Order, 2024, S.O. 1252(E) |
Telescopic Ball Bearing Drawer Slide 1
| Product | Indian Standard | Order |
|---|---|---|
| Telescopic Ball Bearing Drawer Slide | IS 17954:2023 | Telescopic Ball Bearing Drawer Slide (Quality Control) Order, 2024, S.O. 1962(E) |
Cross Recessed Screws 14
Safety of Household, Commercial and Similar Electrical Appliances 1
| Product | Indian Standard | Order |
|---|---|---|
| All Electrical Appliances Vacuum Cleaners and Water Suction Cleaning Appliances | IS 302 (Part 1) : 2024 IEC 60335-1:2020 | Safety of Household, Commercial and Similar Electrical Appliances (Quality Control) Order, 2024, S.O. 4098(E) |
Hand Tools 9
| Product | Indian Standard | Order |
|---|---|---|
| Chain Pipe Wrenches | IS 4123:1982 | Hand Tools (Quality Control) Order, 2024, S.O. 4183(E) |
| Open Ended Slugging Wrenches (Spanners) | IS 4508:1992 | Hand Tools (Quality Control) Order, 2024, S.O. 4183(E) |
| Ring Slugging Wrenches (Spanners) | IS 4509:1992 | Hand Tools (Quality Control) Order, 2024, S.O. 4183(E) |
| Single-ended Open-jaw Adjustable Wrenches | IS 6149:1984 | Hand Tools (Quality Control) Order, 2024, S.O. 4183(E) |
| Open-Jaw Wrenches (Spanners) | IS 2028:2004 | Hand Tools (Quality Control) Order, 2024, S.O. 4183(E) |
| Ring Wrenches (Spanners) | IS 2029:1998 | Hand Tools (Quality Control) Order, 2024, S.O. 4183(E) |
| Pipe Wrenches –General Purpose | IS 4003 (Part 1): 1978 | Hand Tools (Quality Control) Order, 2024, S.O. 4183(E) |
| Pipe Wrenches – Heavy Duty | IS 4003 (Part 2): 1986 | Hand Tools (Quality Control) Order, 2024, S.O. 4183(E) |
| Combination Side Cutting Pliers | IS 3650:1981 | Hand Tools (Quality Control) Order, 2024, S.O. 4183(E) |
Indutech 1
| Product | Indian Standard | Order |
|---|---|---|
| Textiles – Flat Woven Webbing Slings Made of Man-made Fibres for General Services | IS 15041:2001 | Indutech (Quality Control) Order, 2024, S.O. 4326(E) |
Ropes and Cordages 9
Solar Thermal Systems, Devices and Components 3
| Product | Indian Standard | Order |
|---|---|---|
| Solar Flat Plate Collector for Solar Water Heating Systems | IS 12933 (Part 1): 2003 IS 12933 (Part 2): 2003 | Solar Thermal Systems, Devices and Components (Quality Control) Order, 2024, S.O. 4485(E) |
| All Glass Evacuated Tubes Solar Water Heating System | IS 16544: 2016 | Solar Thermal Systems, Devices and Components (Quality Control) Order, 2024, S.O. 4485(E) |
| Storage Water Tank for All Glass Evacuated Tubes Solar Water Heating Systems | IS 16542: 2016 | Solar Thermal Systems, Devices and Components (Quality Control) Order, 2024, S.O. 4485(E) |
Electric Fence Energizers 1
| Product | Indian Standard | Order |
|---|---|---|
| Electric Fence Energizers | IS 302-2-76:1999 | Electric Fence Energizers (Quality Control) Order, 2024, S.O. 4958(E) |
Flashlight 1
| Product | Indian Standard | Order |
|---|---|---|
| Flashlight | IS 2083:2024 | Flashlight (Quality Control) Order, 2025, S.O. 501(E) |
Stainless Steel Pipes and Tubes 2
| Product | Indian Standard | Order |
|---|---|---|
| Stainless Steel Seamless Pipes and Tubes for General Service | IS 17875: 2022 | Stainless Steel Pipes and Tubes (Quality Control) Order, 2025, S.O. 693(E) |
| Stainless Steel Welded Pipes and Tubes for General Service | IS 17876: 2022 | Stainless Steel Pipes and Tubes (Quality Control) Order, 2025, S.O. 693(E) |
Furniture 6
| Product | Indian Standard | Order |
|---|---|---|
| Work Chairs | IS 17631: 2022 | Furniture (Quality Control) Order, 2025, S.O. 801 (E) |
| General Purpose Chairs and Stools | IS 17632: 2022 | Furniture (Quality Control) Order, 2025, S.O. 801 (E) |
| Tables and Desks | IS 17633: 2022 | Furniture (Quality Control) Order, 2025, S.O. 801 (E) |
| Storage Units | IS 17634: 2022 | Furniture (Quality Control) Order, 2025, S.O. 801 (E) |
| Beds | IS 17635: 2022 | Furniture (Quality Control) Order, 2025, S.O. 801 (E) |
| Bunk Beds | IS 17636: 2022 | Furniture (Quality Control) Order, 2025, S.O. 801 (E) |
CRS products (Scheme-II, compulsory registration)
These products need BIS registration under the Compulsory Registration Scheme, with testing at a BIS-recognised lab in India.
Electronics & IT Goods 65
| Product | Indian Standard | Order |
|---|---|---|
| Electronic Games (Video) | IS/IEC 62368: Part 1: 2023 | Electronics & Information Technology Goods (Requirements for Compulsory Registration) Order, 2012 |
| Laptops, Notebooks and Tablets | IS/IEC 62368: Part 1: 2023 | Electronics & Information Technology Goods (Requirements for Compulsory Registration) Order, 2012 |
| LED and LCD TVs (32 inch and above) | IS/IEC 62368: Part 1: 2023 | Electronics & Information Technology Goods (Requirements for Compulsory Registration) Order, 2012 |
| Optical Disc Players (200W and above) | IS/IEC 62368: Part 1: 2023 | Electronics & Information Technology Goods (Requirements for Compulsory Registration) Order, 2012 |
| Microwave Ovens | IS 302-2-25 | Electronics & Information Technology Goods (Requirements for Compulsory Registration) Order, 2012 |
| Monitors (32 inch and above) | IS/IEC 62368: Part 1: 2023 | Electronics & Information Technology Goods (Requirements for Compulsory Registration) Order, 2012 |
| Printers, Plotters | IS/IEC 62368: Part 1: 2023 | Electronics & Information Technology Goods (Requirements for Compulsory Registration) Order, 2012 |
| Scanners | IS/IEC 62368: Part 1: 2023 | Electronics & Information Technology Goods (Requirements for Compulsory Registration) Order, 2012 |
| Wireless Keyboards | IS/IEC 62368: Part 1: 2023 | Electronics & Information Technology Goods (Requirements for Compulsory Registration) Order, 2012 |
| Telephone Answering Machines | IS/IEC 62368: Part 1: 2023 | Electronics & Information Technology Goods (Requirements for Compulsory Registration) Order, 2012 |
| Amplifiers (2000W and above) | IS/IEC 62368: Part 1: 2023 | Electronics & Information Technology Goods (Requirements for Compulsory Registration) Order, 2012 |
| Music Systems (200W and above) | IS/IEC 62368: Part 1: 2023 | Electronics & Information Technology Goods (Requirements for Compulsory Registration) Order, 2012 |
| Mains-Powered Electronic Clocks | IS 302-2:26 | Electronics & Information Technology Goods (Requirements for Compulsory Registration) Order, 2012 |
| Set Top Box | IS/IEC 62368: Part 1: 2023 | Electronics & Information Technology Goods (Requirements for Compulsory Registration) Order, 2012 |
| Computers (Automatic Data Processing Machines) | IS/IEC 62368: Part 1: 2023 | Electronics & Information Technology Goods (Requirements for Compulsory Registration) Order, 2012 |
| Power Adaptors for IT Equipment | IS/IEC 62368: Part 1: 2023 | Electronics & Information Technology Goods (Requirements for Compulsory Registration) Order, 2012 |
| Power Adaptors for Audio and Video Equipment | IS/IEC 62368: Part 1: 2023 | Electronics & Information Technology Goods (Requirements for Compulsory Registration) Order, 2012 |
| UPS and Inverters (up to 5 kVA) | IS 16242 (Part 1) | Electronics & Information Technology Goods (Requirements for Compulsory Registration) Order, 2012 |
| LED Drivers (Control Gear for LED Modules) | IS 15885 (Part 2/Sec 13) | Electronics & Information Technology Goods (Requirements for Compulsory Registration) Order, 2012 |
| Lithium-ion and Portable Batteries | IS 16046 | Electronics & Information Technology Goods (Requirements for Compulsory Registration) Order, 2012 |
| LED Bulbs (Self-Ballasted LED Lamps) | IS 16102(Part 1) | Electronics & Information Technology Goods (Requirements for Compulsory Registration) Order, 2012 |
| LED Luminaires (Fixed General Purpose) | IS 10322 (Part 5/Sec 1) | Electronics & Information Technology Goods (Requirements for Compulsory Registration) Order, 2012 |
| Mobile Phones | IS/IEC 62368: Part 1: 2023, IS 16333 (Part-3) | Electronics & Information Technology Goods (Requirements for Compulsory Registration) Order, 2012 |
| Cash Registers | IS/IEC 62368: Part 1: 2023 | Electronics & Information Technology Goods (Requirements for Compulsory Registration) Order, 2012 |
| Point of Sale Terminals | IS/IEC 62368: Part 1: 2023 | Electronics & Information Technology Goods (Requirements for Compulsory Registration) Order, 2012 |
| Copying Machines/Duplicators | IS/IEC 62368: Part 1: 2023 | Electronics & Information Technology Goods (Requirements for Compulsory Registration) Order, 2012 |
| Smart Card Readers | IS/IEC 62368: Part 1: 2023 | Electronics & Information Technology Goods (Requirements for Compulsory Registration) Order, 2012 |
| Franking and Mail Processing Machines | IS/IEC 62368: Part 1: 2023 | Electronics & Information Technology Goods (Requirements for Compulsory Registration) Order, 2012 |
| Passport Reader | IS/IEC 62368: Part 1: 2023 | Electronics & Information Technology Goods (Requirements for Compulsory Registration) Order, 2012 |
| Power Banks | IS/IEC 62368: Part 1: 2023 | Electronics & Information Technology Goods (Requirements for Compulsory Registration) Order, 2012 |
| Recessed LED Luminaires | IS 10322 (Part 5/Section 2): 2012 | BIS notification, SO 2742 (E) |
| LED Street Lights | IS 10322 (Part 5/Section 3): 2012 | BIS notification, SO 2742 (E) |
| LED Flood Lights | IS 10322 (Part 5/Section 5): 2013 | BIS notification, SO 2742 (E) |
| LED Hand lamps | IS 10322 (Part 5/Section 6): 2013 | BIS notification, SO 2742 (E) |
| LED Lighting Chains | IS 10322 (Part 5/Section 7): 2013 | BIS notification, SO 2742 (E) |
| LED Luminaires for Emergency Lighting | IS 10322 (Part 5/Section 8): 2013 | BIS notification, SO 2742 (E) |
| UPS and Inverters (up to 10 kVA) | IS 16242 (Part 1):2014 | BIS notification, SO 2742 (E) |
| LED and LCD TVs (up to 32 inch) | IS/IEC 62368: Part 1: 2023 | BIS notification, SO 2742 (E) |
| Monitors (up to 32 inch) | IS/IEC 62368: Part 1: 2023 | BIS notification, SO 2742 (E) |
| CCTV Cameras and Recorders | IS/IEC 62368: Part 1: 2023 | BIS notification, SO 2742 (E) |
| Adapters for Household Appliances | IS 302 (Part 1): 2008 | BIS notification, SO 2742 (E) |
| Barcode, Iris and Fingerprint Scanners (USB) | IS/IEC 62368: Part 1: 2023 | BIS notification, SO 2742 (E) |
| Smart watches | IS/IEC 62368: Part 1: 2023 | BIS notification, SO 2742 (E) |
| Standalone LED Modules for General Lighting | IS 16103 (Part 1): 2012 | BIS notification, SO 1236 (E) |
| Lighting Chain (Rope Lights) | IS 10322 (Part 5)Section 9: 2017 | BIS notification, SO 1236 (E) |
| Keyboard | IS/IEC 62368: Part 1: 2023 | BIS notification, SO 1236 (E) |
| Induction Stove | IS 302 (Part 2): Section 6: 2009 | BIS notification, SO 1236 (E) |
| ATMs (Cash Dispensing Machines) | IS/IEC 62368: Part 1: 2023 | BIS notification, SO 1236 (E) |
| External Hard Disk Drives | IS/IEC 62368: Part 1: 2023 | Amendments to the Electronics and Information Technology Goods (Requirements for Compulsory Registration) Order, 2021, S.O.2204 (E) |
| Wireless Headphones and Earphones | IS/IEC 62368: Part 1: 2023 | Amendments to the Electronics and Information Technology Goods (Requirements for Compulsory Registration) Order, 2021, S.O.2204 (E) |
| External SSDs (above 256 GB) | IS/IEC 62368: Part 1: 2023 | Amendments to the Electronics and Information Technology Goods (Requirements for Compulsory Registration) Order, 2021, S.O.2204 (E) |
| Music Systems (below 200W) | IS/IEC 62368: Part 1: 2023 | Amendments to the Electronics and Information Technology Goods (Requirements for Compulsory Registration) Order, 2021, S.O.2204 (E) |
| SMPS Power Supplies (up to 48 V) | IS/IEC 62368: Part 1: 2023 | Amendments to the Electronics and Information Technology Goods (Requirements for Compulsory Registration) Order, 2021, S.O.2204 (E) |
| Other Televisions | IS/IEC 62368: Part 1: 2023 | Amendments to the Electronics and Information Technology Goods (Requirements for Compulsory Registration) Order, 2021, S.O.2204 (E) |
| Rice Cooker | IS 302 (Part 2): Section 15: 2009 | Amendments to the Electronics and Information Technology Goods (Requirements for Compulsory Registration) Order, 2021, S.O.2204 (E) |
| Wireless microphone | IS/IEC 62368: Part 1: 2023 | BIS notification, S.O. 3429(E) |
| Digital Camera | IS/IEC 62368: Part 1: 2023 | BIS notification, S.O. 3429(E) |
| Video Camera | IS/IEC 62368: Part 1: 2023 | BIS notification, S.O. 3429(E) |
| Webcams | IS/IEC 62368: Part 1: 2023 | BIS notification, S.O. 3429(E) |
| Smart Speakers | IS/IEC 62368: Part 1: 2023 | BIS notification, S.O. 3429(E) |
| Dimmers for LED products | IS 60669-2-1: 2008 | BIS notification, S.O. 3429(E) |
| Bluetooth speakers | IS/IEC 62368: Part 1: 2023 | BIS notification, S.O. 3429(E) |
| Television Sets | IS 18112:2022 | Amendment to the Electronics and Information Technology Goods (Requirements for Compulsory Registration) Order, 2021, S.O. 1929(E) |
| AR and VR Headsets (Extended Reality Products) | IS/IEC 62368: Part 1: 2023 | Migration to IS/IEC 62368 : Part 1 : 2023 from IS 13252 : Part 1 : 2010 and IS 616: 2017, S.O. 4997(E) |
| Screen Protectors for Smartphones | IS 19348:2025 | Amendment to the “Electronics and Information Technology Goods (Requirement of Compulsory Registration) Order, 2021”, S.O. 5190 (E) |
Solar PV Systems & Components 4
| Product | Indian Standard | Order |
|---|---|---|
| Crystalline Silicon Solar Panels (PV Modules) | IS 14286, IS/IEC 61730 -1, IS/IEC 61730 -2 | Solar Photovoltaics, Systems, Devices and Components Goods (Requirements for Compulsory Registration) Order, 2017, S.O. 2920(E) |
| Thin-Film Solar Panels (PV Modules) | IS 16077, IS/IEC 61730 -1, IS/IEC 61730 -2 | Solar Photovoltaics, Systems, Devices and Components Goods (Requirements for Compulsory Registration) Order, 2017, S.O. 2920(E) |
| Solar Inverters and Power Converters | IS 16221 (Part 2), IS 16169 | Solar Photovoltaics, Systems, Devices and Components Goods (Requirements for Compulsory Registration) Order, 2017, S.O. 2920(E) |
| Grid-Tied Solar Inverters | IS 16270 | Solar Photovoltaics, Systems, Devices and Components Goods (Requirements for Compulsory Registration) Order, 2017, S.O. 2920(E) |
Chemicals 3
| Product | Indian Standard | Order |
|---|---|---|
| Ortho Phosphoric Acid | IS 798:2020 | Ortho Phosphoric Acid (Quality Control) Amendment Order, 2021, S.O. 2335 (E) |
| Polyphosphoric Acid | IS 17439:2020 | Polyphosphoric Acid(Quality Control) Order, 2021, S.O. 5388(E) |
| Trimethyl Phosphite | IS 17412:2020 | Trimethyl Phosphite (Quality Control) Order, 2022, S.O. 1637(E) |
Source: BIS lists of products under compulsory certification (Scheme-I, Scheme-II), with orders rescinded since then removed. Checked October 2026.
Not sure if your product is on the list?
Tell us what you make or import and we'll confirm the scheme, standard and timeline.
Not sure which certification your product needs?
Talk to a team led by former BIS Directors. We'll map every approval your product needs before you spend on testing.