IS 374 BIS Certification for Electric Ceiling Type Fans

About IS 374

Editions and amendments of IS 374

Amendments:First Amendment (2022). Test reports must reflect the standard with its amendments.

Marking fee for IS 374

BIS charges an annual minimum marking fee for the ISI mark under IS 374, set by unit size, plus a per-unit rate once production passes the minimum:

Unit rate: ₹0.65 per piece. Source: BIS marking fee schedule for Scheme-I products, September 2026.

Sampling and key tests for IS 374

From the BIS product manual for IS 374 (June 2026), which BIS officers and applicants follow for certification:

Sample quantity:3 nos.

Raw material requirements:

• Stampings as per IS 648/ Electrical grade Cold Rolled Close Annealed (CRCA) steel - semi processed after decarburization
• Electronic Type Fan Regulators (if provided) as per IS 11037
• Remote Control Device (if provided) as per IS 14700 (Part 3/Sec 2)

Tests BIS can carry out in a day during factory inspection:

• Earth Continuity Test (A-1)
• Electric Strength Test (A-2)
• Functional test (A-3)
• Simple Running Test (Cl. 18.4 d)
• Protection against access to live parts (Cl. 8)
• Power Input and Current (Cl. 10)
• Leakage Current and Electric Strength at operating temperature (Cl. 13 of IS 302-2-80)
• Provision for Earthing (Cl. 27)
• Starting (Cl. 11)
• Interchangeability (Cl. 12)
• Silent Operation (Cl. 13)
• Performance Requirements (Cl. 14.3, 15)
• Speed and Power Factor (14.4 and 14.5)

The full type test covers every clause of IS 374; the list above is what can be checked on site.

ISI licences under IS 374

BIS records 202 operative licences (213 including deferred, cancelled or under stop marking). Most licensed factories are in Delhi (41), Uttar Pradesh (33), Telangana (27), Haryana (25), West Bengal (14).

Testing against IS 374

BIS inspects the factory and has samples tested to the full Indian Standard at a BIS or BIS-recognised laboratory. After grant, the factory keeps testing production under the Scheme of Inspection and Testing, and BIS draws factory and market samples.

The test report has to cover every clause of IS 374 that applies to the product, in the edition current on the date of testing. When BIS revises IS 374 or replaces it with a new edition, existing licence holders move to the new edition by the date BIS sets in its notification.

How to get an ISI mark licence under IS 374

The licence is granted to the manufacturer for a specific factory and product. Indian factories apply under Scheme-I; overseas factories apply under the Foreign Manufacturers Certification Scheme (FMCS) and must nominate an Authorised Indian Representative.

1. Confirm the exact Indian Standard and the varieties to cover
2. Get the product tested at a BIS-recognised lab (simplified procedure) or arrange BIS sampling
3. Apply on Manak Online with factory, quality-control and test documents
4. BIS factory inspection and sample verification
5. Grant of licence, then marking with the ISI mark and CM/L number

Timeline. BIS targets 30 days under the simplified procedure (applying with a recent lab test report) and 90 days under the normal procedure. Overseas factories under FMCS typically take around 6 months.

Fees. Application fee ₹1,000 and annual licence fee ₹1,000, inspection charges of ₹7,000 per man-day, testing charges, and an annual minimum marking fee set for each Indian Standard (with concessions for micro and small units).

Mark. Certified products carry the ISI Standard Mark with the IS number and the CM/L-XXXXXXXXXX licence number.

Frequently asked questions

Source: BIS lists of products under compulsory certification (Scheme-I, Scheme-II), checked October 2026. See the full BIS product list or all Indian Standards.