IS 8811 Testing: Carbon & Low Alloy Steel (Chemical Analysis)

NABL accredited testing of carbon & low alloy steel (Chemical analysis) to IS 8811: 16 tests, each against its clause.

Independent private consultancy. Aaditech is not BIS or any government department and is not affiliated with or endorsed by them. Licences are granted only by the authority, and you can apply directly on its portal. Our consultancy fees are separate from official fees.

Standard	IS 8811
Covers	Steel (Carbon Steel & Low alloy steel)
Accredited tests	16
Accreditation	NABL, ISO/IEC 17025:2017
BIS-recognised testing	Ask us which laboratory your BIS scheme accepts
Category	Metal & Alloy Testing

IS 8811 tests we offer

#	Test	Clause / method
1	Boron	IS:8811
2	Carbon	IS:8811
3	Chromium	IS:8811
4	Copper	IS:8811
5	Aluminium	IS:8811
6	Cobalt	IS:8811
7	Manganese	IS:8811
8	Molybdenum	IS:8811
9	Nickel	IS:8811
10	Niobium	IS:8811
11	Phosphorus	IS:8811
12	Silicon	IS:8811
13	Sulphur	IS:8811
14	Tin	IS:8811
15	Titanium	IS:8811
16	Vanadium	IS:8811

How IS 8811 testing works

Tell us the purpose. BIS certification, a tender, a customer requirement or a design check. The purpose decides which clauses and which laboratory.
Get the sample list and quote. We confirm the tests, the number of samples and the timeline for your product and its variants.
Send samples. We help with labels, the test request and any technical documents the tests need.
Testing and report. Tests are carried out under NABL accreditation and the report lists each clause, the requirement and the result.
Review and use. We check the report before you submit it to BIS, a tender authority or your customer, and help if they raise a query.

Frequently asked questions

Which IS 8811 tests are NABL accredited?

All 16 tests listed on this page are within NABL accreditation (ISO/IEC 17025), each against the clause of IS 8811 shown next to it. The report carries the NABL accreditation mark for these tests.

Can the IS 8811 test report be used for BIS certification?

BIS accepts reports only from laboratories it has recognised for the standard. Before testing, we confirm which laboratory your BIS application needs, so you do not pay for a report BIS will not accept.

How many samples are needed for IS 8811 testing?

It depends on the product, its variants and the tests you need. Share the product details and the purpose of the test (BIS, tender or customer) and we will send the sample list and a quote.

Can you test only some clauses of IS 8811?

Yes. For a tender, a customer complaint or a design check, we can test selected clauses. For BIS certification or a type test, every applicable clause has to be covered.

Other metal & alloy testing

IS 9879 Stainless Steel (Chemical Analysis)
IS 11035 Aluminium Alloys (Chemical Analysis)
IS 228 Steel (Chemical Analysis)
IS 2599 Zinc & Zinc Alloys (Chemical Analysis)
ASTM E415 Carbon & Low Alloy Steel (Spark OES)
ASTM E1999 Cast Iron (Spark OES)
ASTM E1251 Aluminium Alloys (Spark OES)
ASTM E1086 Stainless Steel (Spark OES)
EN 15079 Copper Alloys (Spark OES)
ASTM A370 Steel Products (Mechanical Tests)

See the NABL testing service for how we work. Tests listed are within NABL accreditation (ISO/IEC 17025).

IS 8811 Testing: Carbon & Low Alloy Steel (Chemical Analysis)

IS 8811 tests we offer

How IS 8811 testing works

Frequently asked questions

Other metal & alloy testing

All NABL testing categories

Not sure which certification your product needs?