IS 7092 BIS Certification: 2 Products (ISI Mark)

Products under IS 7092

Product	Part / edition	Scheme
Aluminium Alloy Tubes for Irrigation Purposes -welded Tubes	IS 7092 (Part 1):1992	ISI mark
Aluminium Alloy Tube for Irrigation Purposes – Extruded Tube	IS 7092 (Part 2):1987	ISI mark

Parts of IS 7092 at a glance

Part	Current edition	Amendments	Operative ISI licences	Min. marking fee (large unit)
IS 7092 (Part 1):1992 Aluminium Alloy Tubes for Irrigation Purposes -welded Tubes	IS 7092 (Part 1):1992	0	—	₹83,000
IS 7092 (Part 2):1987 Aluminium Alloy Tube for Irrigation Purposes – Extruded Tube	IS 7092 (Part 2):1987	2	2	₹83,000

Details by part

IS 7092 (Part 1):1992 Aluminium Alloy Tubes for Irrigation Purposes -welded Tubes

Editions and amendments of IS 7092 (Part 1):1992

Edition	Published	Status
IS 7092 (Part 1):1992 Aluminium alloy tubes for irrigation purposes - Specification: Part 1 welded tubes (Second Revision)	30 Sept 1992	Current, next review 31 Mar 2027

No amendments to the current edition are listed by BIS.

Marking fee for IS 7092 (Part 1):1992

BIS charges an annual minimum marking fee for the ISI mark under IS 7092 (Part 1):1992, set by unit size, plus a per-unit rate once production passes the minimum:

Unit size	Minimum marking fee (per year)
Large	₹83,000
Medium	₹67,000
Small	₹41,500
Micro	₹16,600

Unit rate: ₹87 per tonne. Source: BIS marking fee schedule for Scheme-I products, September 2026.

Sampling and key tests for IS 7092 (Part 1):1992

From the BIS product manual for IS 7092 (Part 1):1992, which BIS officers and applicants follow for certification:

Sample quantity:5 pcs of 5 cm length

IS 7092 (Part 2):1987 Aluminium Alloy Tube for Irrigation Purposes – Extruded Tube

Editions and amendments of IS 7092 (Part 2):1987

Edition	Published	Status
IS 7092 (Part 2):1987 Specification for aluminium alloy tube for irrigation purposes: Part 2 extruded tube (Second Revision)	31 Aug 1987	Current, next review 31 Mar 2027

Amendments:First Amendment (1988), Second Amendment (1992). Test reports must reflect the standard with its amendments.

Marking fee for IS 7092 (Part 2):1987

BIS charges an annual minimum marking fee for the ISI mark under IS 7092 (Part 2):1987, set by unit size, plus a per-unit rate once production passes the minimum:

Unit size	Minimum marking fee (per year)
Large	₹83,000
Medium	₹67,000
Small	₹41,500
Micro	₹16,600

Unit rate: ₹87 per tonne. Source: BIS marking fee schedule for Scheme-I products, September 2026.

Sampling and key tests for IS 7092 (Part 2):1987

From the BIS product manual for IS 7092 (Part 2):1987, which BIS officers and applicants follow for certification:

Sample quantity:tests

ISI licences under IS 7092 (Part 2):1987

BIS records 2 operative licences (2 including deferred, cancelled or under stop marking). Most licensed factories are in Karnataka (1), Rajasthan (1).

Notifying orders

Aluminium and Aluminium Alloy Products (Quality Control) Order, 2023, S.O. 4241(E), dated 25th September 2023 · PDF

How to get an ISI mark licence under IS 7092

The licence is granted to the manufacturer for a specific factory and product. Indian factories apply under Scheme-I; overseas factories apply under the Foreign Manufacturers Certification Scheme (FMCS) and must nominate an Authorised Indian Representative.

Confirm the exact Indian Standard and the varieties to cover
Get the product tested at a BIS-recognised lab (simplified procedure) or arrange BIS sampling
Apply on Manak Online with factory, quality-control and test documents
BIS factory inspection and sample verification
Grant of licence, then marking with the ISI mark and CM/L number

Timeline. BIS targets 30 days under the simplified procedure (applying with a recent lab test report) and 90 days under the normal procedure. Overseas factories under FMCS typically take around 6 months.

Fees. Application fee ₹1,000 and annual licence fee ₹1,000, inspection charges of ₹7,000 per man-day, testing charges, and an annual minimum marking fee set for each Indian Standard (with concessions for micro and small units).

Mark. Certified products carry the ISI Standard Mark with the IS number and the CM/L-XXXXXXXXXX licence number.

Frequently asked questions

Is BIS certification mandatory for products under IS 7092?

Yes, for the 2 products listed on this page. Each is notified by a government order and needs a valid BIS licence (ISI mark) before it can be made, imported or sold in India. Other products that merely use IS 7092 are not automatically covered.

Which part of IS 7092 applies to my product?

IS 7092 has 2 parts or editions referenced in BIS orders. Find your product in the table above to see its exact part. Where a product is covered by more than one standard, all of them apply.

How long does ISI mark under IS 7092 take?

BIS targets 30 days under the simplified procedure (applying with a recent lab test report) and 90 days under the normal procedure. Overseas factories under FMCS typically take around 6 months.

Other standards in Aluminium and Aluminium Alloy Products

IS 21 Wrought Aluminium and Aluminium Alloys for Manufacture of Utensils
IS 733 Wrought Aluminium and Aluminium Alloy Bars, Rods and Sections (For General Engineering Purposes)
IS 734 Wrought Aluminium and Aluminium Alloys, Forging Stock and Forgings for General Engineering Purposes
IS 736 Wrought Aluminium and Aluminium Alloy Plate for General Engineering Purposes
IS 737 Wrought Aluminium and Aluminium Alloy Sheet and Strip for General Engineering Purposes
IS 739 Wrought Aluminium and Aluminium Alloy Wire for General Engineering Purposes
IS 740 Wrought Aluminium and Aluminium Alloy Rivet Stock for General Engineering Purposes
IS 1254 Corrugated Aluminium Sheet
IS 1285 Wrought Aluminium and Aluminium Alloys- Extruded Round Tube and Hollow Sections for General Engineering Purposes
IS 2067 Wrought Aluminium Wire for Electrical Purposes

Source: BIS lists of products under compulsory certification (Scheme-I, Scheme-II), checked October 2026. See the full BIS product list or all Indian Standards.

IS 7092 BIS Certification