IS 1328 BIS Certification for Veneered Decorative Plywood
Veneered Decorative Plywood made, imported or sold in India must be certified against IS 1328 under an ISI mark licence (Scheme-I). What the standard covers, how testing works and how to get the licence.
About IS 1328
| Standard | IS 1328 : 1996 |
|---|---|
| Title | Veneered decorative plywood |
| Product covered | Veneered Decorative Plywood |
| Category | Plywood and Wooden flush door shutters |
| Scheme | ISI mark licence (Scheme-I) |
| Notified under | Plywood and Wooden flush door shutters (Quality Control) Order, 2023, S.O. 3841(E), dated 29th August 2023 · Order PDF |
Editions and amendments of IS 1328
| Edition | Published | Status |
|---|---|---|
| IS 1328:2025 Veneered Decorative Plywood - Specification ( Fourth Revision ) | 13 Jun 2025 | Current, next review 21 May 2031 |
| IS 1328:1996 Veneered Decorative Plywood -Specification | 28 Feb 1996 | Withdrawn 4 Dec 2025 |
No amendments to the current edition are listed by BIS.
Marking fee for IS 1328
BIS charges an annual minimum marking fee for the ISI mark under IS 1328, set by unit size, plus a per-unit rate once production passes the minimum:
| Unit size | Minimum marking fee (per year) |
|---|---|
| Large | ₹66,000 |
| Medium | ₹53,000 |
| Small | ₹33,000 |
| Micro | ₹13,200 |
Unit rate: ₹0.55 per sq.m. Source: BIS marking fee schedule for Scheme-I products, September 2026.
Sampling and key tests for IS 1328
From the BIS product manual for IS 1328, which BIS officers and applicants follow for certification:
Tests BIS can carry out in a day during factory inspection:
- Manufacture (Cl 6), (ii) Surface requirements (Cl 7), (iii) Dimensions and tolerances (Cl 8), (iv) workmanship and finish (Cl 9)
The full type test covers every clause of IS 1328; the list above is what can be checked on site.
ISI licences under IS 1328
BIS records 50 operative licences (53 including deferred, cancelled or under stop marking). Most licensed factories are in Gujarat (14), Haryana (14), Kerala (4), Karnataka (3), Punjab (3).
Testing against IS 1328
BIS inspects the factory and has samples tested to the full Indian Standard at a BIS or BIS-recognised laboratory. After grant, the factory keeps testing production under the Scheme of Inspection and Testing, and BIS draws factory and market samples.
The test report has to cover every clause of IS 1328 that applies to the product, in the edition current on the date of testing. When BIS revises IS 1328 or replaces it with a new edition, existing licence holders move to the new edition by the date BIS sets in its notification.
How to get an ISI mark licence under IS 1328
The licence is granted to the manufacturer for a specific factory and product. Indian factories apply under Scheme-I; overseas factories apply under the Foreign Manufacturers Certification Scheme (FMCS) and must nominate an Authorised Indian Representative.
- Confirm the exact Indian Standard and the varieties to cover
- Get the product tested at a BIS-recognised lab (simplified procedure) or arrange BIS sampling
- Apply on Manak Online with factory, quality-control and test documents
- BIS factory inspection and sample verification
- Grant of licence, then marking with the ISI mark and CM/L number
Timeline. BIS targets 30 days under the simplified procedure (applying with a recent lab test report) and 90 days under the normal procedure. Overseas factories under FMCS typically take around 6 months.
Fees. Application fee ₹1,000 and annual licence fee ₹1,000, inspection charges of ₹7,000 per man-day, testing charges, and an annual minimum marking fee set for each Indian Standard (with concessions for micro and small units).
Mark. Certified products carry the ISI Standard Mark with the IS number and the CM/L-XXXXXXXXXX licence number.
Frequently asked questions
What does IS 1328 cover?
IS 1328 : 1996: Veneered decorative plywood. BIS has made certification against it compulsory for veneered decorative plywood.
Is BIS certification under IS 1328 mandatory?
Yes, for veneered decorative plywood, under the Plywood and Wooden flush door shutters (Quality Control) Order, 2023, S.O. 3841(E). The product needs a valid BIS licence (ISI mark) and must carry the ISI Standard Mark with the IS number and the CM/L-XXXXXXXXXX licence number.
Where is a product tested for IS 1328?
BIS inspects the factory and has samples tested to the full Indian Standard at a BIS or BIS-recognised laboratory. After grant, the factory keeps testing production under the Scheme of Inspection and Testing, and BIS draws factory and market samples.
How long does IS 1328 BIS certification take?
BIS targets 30 days under the simplified procedure (applying with a recent lab test report) and 90 days under the normal procedure. Overseas factories under FMCS typically take around 6 months.
Other standards in Plywood and Wooden flush door shutters
- IS 303 Plywood for General Purposes
- IS 710 Marine Plywood
- IS 2191 2 products
- IS 2202 2 products
- IS 4990 Plywood for Concrete Shuttering Works
- IS 5509 Fire Retardant Plywood
- IS 10701 Structural Plywood
Source: BIS lists of products under compulsory certification (Scheme-I, Scheme-II), checked October 2026. See the full BIS product list or all Indian Standards.
Not sure which certification your product needs?
Talk to a team led by former BIS Directors. We'll map every approval your product needs before you spend on testing.