IS 1783 BIS Certification
2 products must be certified by BIS against IS 1783 and carry the ISI mark. Find your product and its exact part below.
Products under IS 1783
| Product | Part / edition | Scheme |
|---|---|---|
| Drums Large, Fixed Ends – Grade a | IS 1783 (Part 1) :2014 | ISI mark |
| Drums, Large, Fixed Ends – Grade | IS 1783 (Part 2) :2014 | ISI mark |
Parts of IS 1783 at a glance
| Part | Current edition | Amendments | Operative ISI licences | Min. marking fee (large unit) |
|---|---|---|---|---|
| IS 1783 (Part 1) :2014 Drums Large, Fixed Ends – Grade a | IS 1783 (Part 1):2014 | 1 | 31 | ₹62,000 |
| IS 1783 (Part 2) :2014 Drums, Large, Fixed Ends – Grade | IS 1783 (Part 2):2014 | 1 | 35 | ₹60,000 |
Details by part
IS 1783 (Part 1) :2014 Drums Large, Fixed Ends – Grade a
Editions and amendments of IS 1783 (Part 1) :2014
| Edition | Published | Status |
|---|---|---|
| IS 1783 (Part 1):2014 Drums large, fixed ends -- Specification: Part 1 Grade A drums (Fourth Revision) | 31 Dec 2014 | Current, next review 31 Jan 2027 |
Amendments:First Amendment (2023). Test reports must reflect the standard with its amendments.
Marking fee for IS 1783 (Part 1) :2014
BIS charges an annual minimum marking fee for the ISI mark under IS 1783 (Part 1) :2014, set by unit size, plus a per-unit rate once production passes the minimum:
| Unit size | Minimum marking fee (per year) |
|---|---|
| Large | ₹62,000 |
| Medium | ₹50,000 |
| Small | ₹31,000 |
| Micro | ₹12,400 |
Unit rate: ₹0.35 per i piece. Source: BIS marking fee schedule for Scheme-I products, September 2026.
Sampling and key tests for IS 1783 (Part 1) :2014
From the BIS product manual for IS 1783 (Part 1) :2014, which BIS officers and applicants follow for certification:
Sample quantity:2 drums and 5 closures
Tests BIS can carry out in a day during factory inspection:
- Capacity (clause 4)
- Dimensions (clause 5)
- Construction (clause 7)
- Finish (clause 8)
- Leakage Test, Drop Test, Hydraulic Pressure Test (clause 9)
The full type test covers every clause of IS 1783 (Part 1) :2014; the list above is what can be checked on site.
ISI licences under IS 1783 (Part 1) :2014
BIS records 31 operative licences (32 including deferred, cancelled or under stop marking). Most licensed factories are in Gujarat (8), Tamil Nadu (6), Maharashtra (5), Dadra & Nagar Haveli (3), West Bengal (3).
IS 1783 (Part 2) :2014 Drums, Large, Fixed Ends – Grade
Editions and amendments of IS 1783 (Part 2) :2014
| Edition | Published | Status |
|---|---|---|
| IS 1783 (Part 2):2014 Drums large, fixed ends -- Specification: Part 2 Grade B drums (Fourth Revision) | 31 Mar 2014 | Current, next review 31 Jan 2027 |
Amendments:First Amendment (2023). Test reports must reflect the standard with its amendments.
Marking fee for IS 1783 (Part 2) :2014
BIS charges an annual minimum marking fee for the ISI mark under IS 1783 (Part 2) :2014, set by unit size, plus a per-unit rate once production passes the minimum:
| Unit size | Minimum marking fee (per year) |
|---|---|
| Large | ₹60,000 |
| Medium | ₹48,000 |
| Small | ₹30,000 |
| Micro | ₹12,000 |
Unit rate: ₹1.8 per one drum. Source: BIS marking fee schedule for Scheme-I products, September 2026.
Sampling and key tests for IS 1783 (Part 2) :2014
From the BIS product manual for IS 1783 (Part 2) :2014, which BIS officers and applicants follow for certification:
Sample quantity:2 drums and 5 closures
Tests BIS can carry out in a day during factory inspection:
- Capacity (clause 4)
- Dimensions (clause 5)
- Construction (clause 7)
- Finish (clause 8)
- Leakage Test, Drop Test, Hydraulic Pressure Test (clause 9)
The full type test covers every clause of IS 1783 (Part 2) :2014; the list above is what can be checked on site.
ISI licences under IS 1783 (Part 2) :2014
BIS records 35 operative licences (36 including deferred, cancelled or under stop marking). Most licensed factories are in Gujarat (10), Maharashtra (6), Tamil Nadu (5), Dadra & Nagar Haveli (3), Haryana (3).
Notifying orders
- Drums and Tins (Quality Control) Order, 2023, S.O. 4596(E), dated 17th October 2023 · PDF
How to get an ISI mark licence under IS 1783
The licence is granted to the manufacturer for a specific factory and product. Indian factories apply under Scheme-I; overseas factories apply under the Foreign Manufacturers Certification Scheme (FMCS) and must nominate an Authorised Indian Representative.
- Confirm the exact Indian Standard and the varieties to cover
- Get the product tested at a BIS-recognised lab (simplified procedure) or arrange BIS sampling
- Apply on Manak Online with factory, quality-control and test documents
- BIS factory inspection and sample verification
- Grant of licence, then marking with the ISI mark and CM/L number
Timeline. BIS targets 30 days under the simplified procedure (applying with a recent lab test report) and 90 days under the normal procedure. Overseas factories under FMCS typically take around 6 months.
Fees. Application fee ₹1,000 and annual licence fee ₹1,000, inspection charges of ₹7,000 per man-day, testing charges, and an annual minimum marking fee set for each Indian Standard (with concessions for micro and small units).
Mark. Certified products carry the ISI Standard Mark with the IS number and the CM/L-XXXXXXXXXX licence number.
Frequently asked questions
Is BIS certification mandatory for products under IS 1783?
Yes, for the 2 products listed on this page. Each is notified by a government order and needs a valid BIS licence (ISI mark) before it can be made, imported or sold in India. Other products that merely use IS 1783 are not automatically covered.
Which part of IS 1783 applies to my product?
IS 1783 has 2 parts or editions referenced in BIS orders. Find your product in the table above to see its exact part. Where a product is covered by more than one standard, all of them apply.
How long does ISI mark under IS 1783 take?
BIS targets 30 days under the simplified procedure (applying with a recent lab test report) and 90 days under the normal procedure. Overseas factories under FMCS typically take around 6 months.
Other standards in Drums and Tins
- IS 916 Square Tins for Solid Products
- IS 2552 Steel Drums (Galvanized and Ungalvanized)
- IS 3575 Bitumen Drums
- IS 10325 Square Tins – 15 Kilograms or Litre for Ghee, Vanaspati, Edible Oils and Bakery
- IS 13997 Drums, Large Open Top
Source: BIS lists of products under compulsory certification (Scheme-I, Scheme-II), checked October 2026. See the full BIS product list or all Indian Standards.
Not sure which certification your product needs?
Talk to a team led by former BIS Directors. We'll map every approval your product needs before you spend on testing.