IS 10632 BIS Certification
2 products must be certified by BIS against IS 10632 and carry the ISI mark. Find your product and its exact part below.
Products under IS 10632
| Product | Part / edition | Scheme |
|---|---|---|
| Non Magnetic Stainless Steel for Electrical Applications Part 2 Specific Requirements for Binding Wire | IS 10632 (Part 2):1983 | ISI mark |
| Non Magnetic Stainless Steel for Electrical Applications Part 3 Specific Requirements for Sheets, Strips and Plates | IS 10632 (Part 3):1983 | ISI mark |
Parts of IS 10632 at a glance
| Part | Current edition | Amendments | Operative ISI licences | Min. marking fee (large unit) |
|---|---|---|---|---|
| IS 10632 (Part 2):1983 Non Magnetic Stainless Steel for Electrical Applications Part 2 Specific Requirements for Binding Wire | IS 10632 (Part 2):1983 | 1 | — | — |
| IS 10632 (Part 3):1983 Non Magnetic Stainless Steel for Electrical Applications Part 3 Specific Requirements for Sheets, Strips and Plates | IS 10632 (Part 3):1983 | 1 | — | — |
Details by part
IS 10632 (Part 2):1983 Non Magnetic Stainless Steel for Electrical Applications Part 2 Specific Requirements for Binding Wire
Editions and amendments of IS 10632 (Part 2):1983
| Edition | Published | Status |
|---|---|---|
| IS 10632 (Part 2):1983 Specification for non magnetic stainless steels for electrical applications: Part 2 specific requirements for binding wires | 30 Nov 1983 | Current, next review 30 Apr 2029 |
Amendments:First Amendment (2020). Test reports must reflect the standard with its amendments.
IS 10632 (Part 3):1983 Non Magnetic Stainless Steel for Electrical Applications Part 3 Specific Requirements for Sheets, Strips and Plates
Editions and amendments of IS 10632 (Part 3):1983
| Edition | Published | Status |
|---|---|---|
| IS 10632 (Part 3):1983 Specification for non magnetic stainless steels for electrical applications: Part 3 specific requirements for sheets, strips and plates | 30 Nov 1983 | Current, next review 30 Apr 2029 |
Amendments:First Amendment (2020). Test reports must reflect the standard with its amendments.
Notifying orders
- Steel and Steel Products (Quality Control) Order, 2020, S.O. 756(E), dated 14-02-2020 · PDF
How to get an ISI mark licence under IS 10632
The licence is granted to the manufacturer for a specific factory and product. Indian factories apply under Scheme-I; overseas factories apply under the Foreign Manufacturers Certification Scheme (FMCS) and must nominate an Authorised Indian Representative.
- Confirm the exact Indian Standard and the varieties to cover
- Get the product tested at a BIS-recognised lab (simplified procedure) or arrange BIS sampling
- Apply on Manak Online with factory, quality-control and test documents
- BIS factory inspection and sample verification
- Grant of licence, then marking with the ISI mark and CM/L number
Timeline. BIS targets 30 days under the simplified procedure (applying with a recent lab test report) and 90 days under the normal procedure. Overseas factories under FMCS typically take around 6 months.
Fees. Application fee ₹1,000 and annual licence fee ₹1,000, inspection charges of ₹7,000 per man-day, testing charges, and an annual minimum marking fee set for each Indian Standard (with concessions for micro and small units).
Mark. Certified products carry the ISI Standard Mark with the IS number and the CM/L-XXXXXXXXXX licence number.
Frequently asked questions
Is BIS certification mandatory for products under IS 10632?
Yes, for the 2 products listed on this page. Each is notified by a government order and needs a valid BIS licence (ISI mark) before it can be made, imported or sold in India. Other products that merely use IS 10632 are not automatically covered.
Which part of IS 10632 applies to my product?
IS 10632 has 2 parts or editions referenced in BIS orders. Find your product in the table above to see its exact part. Where a product is covered by more than one standard, all of them apply.
How long does ISI mark under IS 10632 take?
BIS targets 30 days under the simplified procedure (applying with a recent lab test report) and 90 days under the normal procedure. Overseas factories under FMCS typically take around 6 months.
Other standards in Steel and Iron Products
- IS 277 Galvanized Steel Sheets ( Plain and Corrugated)
- IS 280 Mild Steel Wire for General Engineering Purposes
- IS 412 Expanded Metal Steel Sheets for General Purposes
- IS 432 2 products
- IS 513 2 products
- IS 648 Cold Rolled Non-oriented Electrical Steel Sheets and Strip-fully Processed Type (CRNO)
- IS 963 Chrome Molybdenum Steel Bars and Rods for Aircraft Purposes
- IS 1029 Hot Rolled Steel Strip (bailing)
- IS 1079 Hot Rolled Carbon Steel Sheet, Plate and Strip —
- IS 1110 Ferrosilicon
Source: BIS lists of products under compulsory certification (Scheme-I, Scheme-II), checked October 2026. See the full BIS product list or all Indian Standards.
Not sure which certification your product needs?
Talk to a team led by former BIS Directors. We'll map every approval your product needs before you spend on testing.