IS 302 BIS Certification
20 products must be certified by BIS against IS 302, under both the ISI mark (Scheme-I) and CRS registration (Scheme-II). Find your product and its exact part below.
Products under IS 302
| Product | Part / edition | Scheme |
|---|---|---|
| Electric Iron | IS 302 (Part 2/Sec 3) | ISI mark |
| Electric Immersion Water-heaters | IS 302 (Part 2/Sec 201) | ISI mark |
| Electric Stoves | IS 302 (Part 2/Sec 202) | ISI mark |
| Room Heaters | IS 302 (Part 2/Sec 30) | ISI mark |
| Hand-held Blender | IS 302 (Part 2/ Section 14) | ISI mark |
| Toasters, Grills, Roasters and Similar Appliances | IS 302 (Part 2/Sec 9): 2009 | ISI mark |
| Range Hoods | IS 302 (Part 2/Sec 31): 2009 | ISI mark |
| Appliances for Skin or Hair Care | IS 302 (Part 2/Sec 23): 2009 | ISI mark |
| Fans | IS 302 (Part 2/ Sec 80): 2017 | ISI mark |
| Commercial Dispensing Appliances and Vending Machines | IS 302 (Part 2/Sec 75): 2018 | ISI mark |
| Domestic Electric Clothes Washing Machines | IS 302 (Part 2/Sec 7): 2010 | ISI mark |
| Appliances for Stationary Storage Type Electric Water Heaters | IS 302 (Part 2/Sec 21): 2018 | ISI mark |
| Appliances for Electric Instantaneous Water Heaters | IS 302 (Part 2/Sec 35): 2017 | ISI mark |
| All Electrical Appliances Vacuum Cleaners and Water Suction Cleaning Appliances | IS 302 (Part 1) : 2024 IEC 60335-1:2020 | ISI mark |
| Electric Fence Energizers | IS 302-2-76:1999 | ISI mark |
| Microwave Ovens | IS 302-2-25 Safety of household and similar electrical appliances: Part 2 Particular requirements: Section 25 Microwave ovens | CRS |
| Mains-Powered Electronic Clocks | IS 302-2:26 Safety of household and similar electrical appliances: Part 2 Particular requirements: Section 26 Clocks | CRS |
| Adapters for Household Appliances | IS 302 (Part 1): 2008 Safety of Household and similar electrical appliances Part 1 General requirements | CRS |
| Induction Stove | IS 302 (Part 2): Section 6: 2009 Safety of household and similar electrical appliances: part 2 particular requirements, section 6 cooking ranges, hobs, ovens and similar appliances | CRS |
| Rice Cooker | IS 302 (Part 2): Section 15: 2009 safety of household and similar electrical appliances: part 2 particular requirements: section 15 appliances for heating liquids | CRS |
Parts of IS 302 at a glance
| Part | Current edition | Amendments | Operative ISI licences | Min. marking fee (large unit) |
|---|---|---|---|---|
| IS 302 (Part 2/Sec 3) Electric Iron | IS 302 (Part 2/Sec 3):2024 | 1 | 160 | ₹73,000 |
| IS 302 (Part 2/Sec 201) Electric Immersion Water-heaters | IS 302 (Part 2/Sec 201):2008 | 1 | 60 | ₹66,000 |
| IS 302 (Part 2/Sec 202) Electric Stoves | IS 302 (Part 2/Sec 202):1992 | 2 | 1 | ₹75,000 |
| IS 302 (Part 2/Sec 30) Room Heaters | IS 302 (Part 2/Sec 30):2007 | 3 | 115 | ₹85,000 |
| IS 302 (Part 2/ Section 14) Hand-held Blender | IS 302 (Part 2/Sec 14):2009 | 0 | 82 | ₹1,47,000 |
| IS 302 (Part 2/Sec 9): 2009 Toasters, Grills, Roasters and Similar Appliances | IS 302 (Part 2/Sec 9):2009 | 2 | 115 | ₹1,14,000 |
| IS 302 (Part 2/Sec 31): 2009 Range Hoods | IS 302 (Part 2/Sec 31):2009 | 0 | 49 | ₹1,65,000 |
| IS 302 (Part 2/Sec 23): 2009 Appliances for Skin or Hair Care | IS 302 (Part 2/Sec 23):2009 | 1 | 54 | ₹2,22,000 |
| IS 302 (Part 2/ Sec 80): 2017 Fans | IS 302 (Part 2/Sec 80):2017 | 2 | 178 | ₹1,54,000 |
| IS 302 (Part 2/Sec 75): 2018 Commercial Dispensing Appliances and Vending Machines | IS 302 (Part 2/Sec 75):2018 | 0 | 17 | ₹2,38,000 |
| IS 302 (Part 2/Sec 7): 2010 Domestic Electric Clothes Washing Machines | IS 302 (Part 2/Sec 7):2024 | 0 | 42 | ₹3,31,000 |
| IS 302 (Part 2/Sec 21): 2018 Appliances for Stationary Storage Type Electric Water Heaters | IS 302 (Part 2/Sec 21):2024 | 1 | 28 | ₹1,30,000 |
| IS 302 (Part 2/Sec 35): 2017 Appliances for Electric Instantaneous Water Heaters | IS 302 (Part 2/Sec 35):2017 | 1 | 58 | ₹1,04,000 |
| IS 302 (Part 1) : 2024 IEC 60335-1:2020 All Electrical Appliances Vacuum Cleaners and Water Suction Cleaning Appliances | IS 302 (Part 1):2024 | 4 | 612 | — |
| IS 302-2-76:1999 Electric Fence Energizers | IS 302 (Part 2/Sec 76):1999 | 0 | 43 | ₹2,70,000 |
| IS 302-2-25 Microwave Ovens | IS 302 (Part 2/Sec 25):2014 | 0 | — | — |
| IS 302-2:26 Mains-Powered Electronic Clocks | IS 302 (Part 2/Sec 26):2026 | 1 | — | — |
| IS 302 (Part 1): 2008 Adapters for Household Appliances | IS 302 (Part 1):2024 | 4 | 612 | — |
| IS 302 (Part 2): Section 6: 2009 Induction Stove | IS 302 (Part 2/Sec 6):2009 | 0 | — | — |
| IS 302 (Part 2): Section 15: 2009 Rice Cooker | IS 302 (Part 2/Sec 15):2009 | 0 | 18 | ₹1,58,000 |
Details by part
IS 302 (Part 2/Sec 3) Electric Iron
Editions and amendments of IS 302 (Part 2/Sec 3)
| Edition | Published | Status |
|---|---|---|
| IS 302 (Part 2/Sec 3):2024 Household and Similar Electrical Appliances Safety Part 2 Particular Requirements Section 3 Electric Irons (Second Revision) | 5 Sept 2024 | Current, next review 30 Sept 2029 |
| IS 302 (Part 2/Sec 3):2007 Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 3 electric iron (First Revision) | 30 Jun 2007 | Current, next review 1 Mar 2027 |
BIS lists 2 current editions of IS 302 (Part 2/Sec 3). During a changeover both can be used until the date BIS sets for moving to the newer one.
Amendments:First Amendment (2013) to IS 302 (Part 2/Sec 3):2007. Test reports must reflect the standard with its amendments.
Marking fee for IS 302 (Part 2/Sec 3)
BIS charges an annual minimum marking fee for the ISI mark under IS 302 (Part 2/Sec 3), set by unit size, plus a per-unit rate once production passes the minimum:
| Unit size | Minimum marking fee (per year) |
|---|---|
| Large | ₹73,000 |
| Medium | ₹59,000 |
| Small | ₹36,500 |
| Micro | ₹14,600 |
Unit rate: ₹1.3 per piece. Source: BIS marking fee schedule for Scheme-I products, September 2026.
Sampling and key tests for IS 302 (Part 2/Sec 3)
From the BIS product manual for IS 302 (Part 2/Sec 3), which BIS officers and applicants follow for certification:
Sample quantity:4 number
Tests BIS can carry out in a day during factory inspection:
- Earth Continuity test (A-1 of IS 302 (Part 1))
- Electric strength test (A-2 of IS 302 (Part 1))
- Functional Test (A-3 of IS 302 (Part 1))
- Marking (Cl. 7)
- Protection Against Live Parts (Cl. 8)
- Power Input and current (Cl. 10)
- Leakage current and electric strength at operating temperature (Cl. 13)
- Provision for Earthing (C. 27)
The full type test covers every clause of IS 302 (Part 2/Sec 3); the list above is what can be checked on site.
ISI licences under IS 302 (Part 2/Sec 3)
BIS records 160 operative licences (162 including deferred, cancelled or under stop marking). Most licensed factories are in Delhi (68), Himachal Pradesh (32), Haryana (28), Gujarat (10), Maharashtra (4).
IS 302 (Part 2/Sec 201) Electric Immersion Water-heaters
Editions and amendments of IS 302 (Part 2/Sec 201)
| Edition | Published | Status |
|---|---|---|
| IS 302 (Part 2/Sec 201):2008 Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 201 electric immersion water heaters (First Revision) | 31 May 2008 | Current, next review 31 May 2023 |
Amendments:First Amendment (2013). Test reports must reflect the standard with its amendments.
Marking fee for IS 302 (Part 2/Sec 201)
BIS charges an annual minimum marking fee for the ISI mark under IS 302 (Part 2/Sec 201), set by unit size, plus a per-unit rate once production passes the minimum:
| Unit size | Minimum marking fee (per year) |
|---|---|
| Large | ₹66,000 |
| Medium | ₹53,000 |
| Small | ₹33,000 |
| Micro | ₹13,200 |
Unit rate: ₹1.3 per piece. Source: BIS marking fee schedule for Scheme-I products, September 2026.
Sampling and key tests for IS 302 (Part 2/Sec 201)
From the BIS product manual for IS 302 (Part 2/Sec 201), which BIS officers and applicants follow for certification:
Sample quantity:2 Nos. of electric immersion water heaters
Tests BIS can carry out in a day during factory inspection:
- Earth Continuity test (A-1 of IS 302-2-7)
- Electric strength test (A-2 of IS 302-2-7)
- Functional test (A-3 of IS 302-2-7)
- Marking and Instruction (Cl. 7)
- Protection against access to live parts (Cl. 8)
- Power input and current (Cl. 10)
- Leakage current and Electric strength (Cl. 16)
- Provision for earthing (Cl. 27)
The full type test covers every clause of IS 302 (Part 2/Sec 201); the list above is what can be checked on site.
ISI licences under IS 302 (Part 2/Sec 201)
BIS records 60 operative licences (69 including deferred, cancelled or under stop marking). Most licensed factories are in Delhi (38), Haryana (11), Uttar Pradesh (5), Himachal Pradesh (4), Punjab (1).
IS 302 (Part 2/Sec 202) Electric Stoves
Editions and amendments of IS 302 (Part 2/Sec 202)
| Edition | Published | Status |
|---|---|---|
| IS 302 (Part 2/Sec 202):1992 Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 202 electric stoves | 31 Mar 1992 | Current, next review 3 Oct 2029 |
Amendments:First Amendment (1993), Second Amendment (2002). Test reports must reflect the standard with its amendments.
Marking fee for IS 302 (Part 2/Sec 202)
BIS charges an annual minimum marking fee for the ISI mark under IS 302 (Part 2/Sec 202), set by unit size, plus a per-unit rate once production passes the minimum:
| Unit size | Minimum marking fee (per year) |
|---|---|
| Large | ₹75,000 |
| Medium | ₹60,000 |
| Small | ₹37,500 |
| Micro | ₹15,000 |
Unit rate: ₹0.8 per piece. Source: BIS marking fee schedule for Scheme-I products, September 2026.
Sampling and key tests for IS 302 (Part 2/Sec 202)
From the BIS product manual for IS 302 (Part 2/Sec 202), which BIS officers and applicants follow for certification:
Sample quantity:2 nos. of Electric Stove
Tests BIS can carry out in a day during factory inspection:
- Earth Continuity test (Cl. 5.1, A-1 of IS 302-1)
- Electric strength test (Cl. 5.1, A-2 of IS 302-1)
- Functional test (Cl. 5.1, A-2 of IS 302-1)
- Protection against access to live parts (Cl. 8)
- Power input and current (Cl. 10)
- Heating (Cl. 11)
- Leakage current and electric strength at operating temperature (Cl. 16)
- Mechanical strength (Cl. 21)
- Provision for earthing (Cl. 27)
- Screws and connections (Cl. 28)
- Stability and Mechanical Hazards (Cl. 20)
- Marking (Cl. 7)
- Internal wiring (Cl. 23)
- Terminals for external conductors (Cl. 26)
The full type test covers every clause of IS 302 (Part 2/Sec 202); the list above is what can be checked on site.
ISI licences under IS 302 (Part 2/Sec 202)
BIS records 1 operative licences (1 including deferred, cancelled or under stop marking). Most licensed factories are in Uttar Pradesh (1).
IS 302 (Part 2/Sec 30) Room Heaters
Editions and amendments of IS 302 (Part 2/Sec 30)
| Edition | Published | Status |
|---|---|---|
| IS 302 (Part 2/Sec 30):2007 Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 30 room heaters (First Revision) | 31 Aug 2007 | Current, next review 31 Dec 2029 |
Amendments:First Amendment (2012), Second Amendment (2019), Third Amendment (2023). Test reports must reflect the standard with its amendments.
Marking fee for IS 302 (Part 2/Sec 30)
BIS charges an annual minimum marking fee for the ISI mark under IS 302 (Part 2/Sec 30), set by unit size, plus a per-unit rate once production passes the minimum:
| Unit size | Minimum marking fee (per year) |
|---|---|
| Large | ₹85,000 |
| Medium | ₹68,000 |
| Small | ₹42,500 |
| Micro | ₹17,000 |
Unit rate: ₹1.3 per piece. Source: BIS marking fee schedule for Scheme-I products, September 2026.
Sampling and key tests for IS 302 (Part 2/Sec 30)
From the BIS product manual for IS 302 (Part 2/Sec 30), which BIS officers and applicants follow for certification:
Sample quantity:2 nos. of Room Heaters
Tests BIS can carry out in a day during factory inspection:
- Earth Continuity test (Cl. 5.1, A-1 of IS 302-1)
- Electric strength test (Cl. 5.1, A-2 of IS 302-1)
- Functional test (Cl. 5.1, A-2 of IS 302-1)
- Protection against access to live parts (Cl. 8)
- Power input and current (Cl. 10)
- Heating (Cl. 11)
- Leakage current and electric strength at operating temperature (Cl. 16)
- Mechanical strength (Cl. 21)
- Provision for earthing (Cl. 27)
- Screws and connections (Cl. 28)
- Resistance to heat and fire (Cl. 30)
- Stability and Mechanical Hazards (Cl. 20)
- Marking (Cl. 7)
The full type test covers every clause of IS 302 (Part 2/Sec 30); the list above is what can be checked on site.
ISI licences under IS 302 (Part 2/Sec 30)
BIS records 115 operative licences (125 including deferred, cancelled or under stop marking). Most licensed factories are in Haryana (40), Delhi (30), Himachal Pradesh (14), Uttar Pradesh (14), Rajasthan (5).
IS 302 (Part 2/ Section 14) Hand-held Blender
Editions and amendments of IS 302 (Part 2/ Section 14)
| Edition | Published | Status |
|---|---|---|
| IS 302 (Part 2/Sec 14):2009 Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 14 electric kitchen machines (First Revision) | 31 Dec 2009 | Current, next review 31 Dec 2029 |
No amendments to the current edition are listed by BIS.
Marking fee for IS 302 (Part 2/ Section 14)
BIS charges an annual minimum marking fee for the ISI mark under IS 302 (Part 2/ Section 14), set by unit size, plus a per-unit rate once production passes the minimum:
| Unit size | Minimum marking fee (per year) |
|---|---|
| Large | ₹1,47,000 |
| Medium | ₹1,18,000 |
| Small | ₹73,500 |
| Micro | ₹29,400 |
Unit rate: ₹2 per piece. Source: BIS marking fee schedule for Scheme-I products, September 2026.
Sampling and key tests for IS 302 (Part 2/ Section 14)
From the BIS product manual for IS 302 (Part 2/ Section 14), which BIS officers and applicants follow for certification:
Sample quantity:2 numbers
Raw material requirements:
- Components as per Cl. 24 of IS 302-2-14
Tests BIS can carry out in a day during factory inspection:
- Marking (Cl. 8)
- Earth Continuity Test (A-1 of IS 302-1)
- Electric Strength Test (A-2 of IS 302-1)
- Functional test (A-3 of IS 302-1)
- Protection Against Electric Shock ( Cl. 8)
- Power Input and Current (Cl. 10)
- Electric Insulation and Leakage Current at Operating Temperature ( Cl. 13)
- Provisions of Earthing ( Cl. 27)
The full type test covers every clause of IS 302 (Part 2/ Section 14); the list above is what can be checked on site.
ISI licences under IS 302 (Part 2/ Section 14)
BIS records 82 operative licences (83 including deferred, cancelled or under stop marking). Most licensed factories are in Haryana (25), Maharashtra (11), Himachal Pradesh (9), Delhi (9), Uttar Pradesh (7).
IS 302 (Part 2/Sec 9): 2009 Toasters, Grills, Roasters and Similar Appliances
Editions and amendments of IS 302 (Part 2/Sec 9): 2009
| Edition | Published | Status |
|---|---|---|
| IS 302 (Part 2/Sec 9):2009 Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 9 toasters, grills, roasters and similar appliances (First Revision) | 31 Dec 2009 | Current, next review 31 Dec 2029 |
Amendments:First Amendment (2002), Second Amendment (2005). Test reports must reflect the standard with its amendments.
Marking fee for IS 302 (Part 2/Sec 9): 2009
BIS charges an annual minimum marking fee for the ISI mark under IS 302 (Part 2/Sec 9): 2009, set by unit size, plus a per-unit rate once production passes the minimum:
| Unit size | Minimum marking fee (per year) |
|---|---|
| Large | ₹1,14,000 |
| Medium | ₹92,000 |
| Small | ₹57,000 |
| Micro | ₹22,800 |
Unit rate: ₹0.95 per no.. Source: BIS marking fee schedule for Scheme-I products, September 2026.
Sampling and key tests for IS 302 (Part 2/Sec 9): 2009
From the BIS product manual for IS 302 (Part 2/Sec 9): 2009, which BIS officers and applicants follow for certification:
Sample quantity:1 no.
Tests BIS can carry out in a day during factory inspection:
- Earth Continuity test (A-1 of IS 302-1)
- Electric strength test (A-2 of IS 302-1)
- Protection against access to live parts (Cl. 8)
- Power input and current (Cl. 10)
- Heating (Cl. 11)
- Leakage current and electric strength at operating temperature (Cl. 13)
- Mechanical strength (Cl. 21)
- Provision for earthing (Cl. 27)
- Screws and connections (Cl. 28)
- Resistance to heat and fire (Cl. 30)
- Stability and Mechanical Hazards (Cl. 20)
The full type test covers every clause of IS 302 (Part 2/Sec 9): 2009; the list above is what can be checked on site.
ISI licences under IS 302 (Part 2/Sec 9): 2009
BIS records 115 operative licences (119 including deferred, cancelled or under stop marking). Most licensed factories are in Haryana (41), Himachal Pradesh (15), Uttar Pradesh (12), Maharashtra (10), Delhi (9).
IS 302 (Part 2/Sec 31): 2009 Range Hoods
Editions and amendments of IS 302 (Part 2/Sec 31): 2009
| Edition | Published | Status |
|---|---|---|
| IS 302 (Part 2/Sec 31):2009 Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 31 range hoods | 31 Dec 2010 | Current, next review 31 Dec 2029 |
No amendments to the current edition are listed by BIS.
Marking fee for IS 302 (Part 2/Sec 31): 2009
BIS charges an annual minimum marking fee for the ISI mark under IS 302 (Part 2/Sec 31): 2009, set by unit size, plus a per-unit rate once production passes the minimum:
| Unit size | Minimum marking fee (per year) |
|---|---|
| Large | ₹1,65,000 |
| Medium | ₹1,32,000 |
| Small | ₹82,500 |
| Micro | ₹33,000 |
Unit rate: ₹3.3 per piece. Source: BIS marking fee schedule for Scheme-I products, September 2026.
Sampling and key tests for IS 302 (Part 2/Sec 31): 2009
From the BIS product manual for IS 302 (Part 2/Sec 31): 2009 (July 2026), which BIS officers and applicants follow for certification:
Sample quantity:1 no.
Raw material requirements:
- Components as per Cl. 24 of IS 302 (Part 1)
Tests BIS can carry out in a day during factory inspection:
- Marking (Cl.7)
- Earth Continuity Test (A-1)
- Electric Strength Test (A-2)
- Functional test (A-3)
- Protection against access to live parts (Cl. 8)
- Power Input and Current (Cl. 10)
- Heating (Cl. 11)
- Leakage Current and Electric Strength at operating temperature (Cl. 13)
- Mechanical Strength (Cl.21)
- Provision for Earthing (Cl. 27)
- Screws and connections (Cl. 28)
- Resistance to heat and fire (Cl. 30)
- Stability and Mechanical Hazards (Cl. 20)
The full type test covers every clause of IS 302 (Part 2/Sec 31): 2009; the list above is what can be checked on site.
ISI licences under IS 302 (Part 2/Sec 31): 2009
BIS records 49 operative licences (51 including deferred, cancelled or under stop marking). Most licensed factories are in Haryana (16), West Bengal (5), Uttar Pradesh (4), Gujarat (3), Maharashtra (3).
IS 302 (Part 2/Sec 23): 2009 Appliances for Skin or Hair Care
Editions and amendments of IS 302 (Part 2/Sec 23): 2009
| Edition | Published | Status |
|---|---|---|
| IS 302 (Part 2/Sec 23):2009 Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 23 appliances for skin or hair care (First Revision) | 31 Dec 2009 | Current, next review 31 Dec 2029 |
Amendments:First Amendment (2024). Test reports must reflect the standard with its amendments.
Marking fee for IS 302 (Part 2/Sec 23): 2009
BIS charges an annual minimum marking fee for the ISI mark under IS 302 (Part 2/Sec 23): 2009, set by unit size, plus a per-unit rate once production passes the minimum:
| Unit size | Minimum marking fee (per year) |
|---|---|
| Large | ₹2,22,000 |
| Medium | ₹1,78,000 |
| Small | ₹1,11,000 |
| Micro | ₹44,400 |
Unit rate: ₹0.15 per piece. Source: BIS marking fee schedule for Scheme-I products, September 2026.
Sampling and key tests for IS 302 (Part 2/Sec 23): 2009
From the BIS product manual for IS 302 (Part 2/Sec 23): 2009, which BIS officers and applicants follow for certification:
Sample quantity:1 number
Tests BIS can carry out in a day during factory inspection:
- Earth Continuity test (A-1 of IS 302-1)
- Electric strength test (A-2 of IS 302-1)
- Protection against access to live parts (Cl. 8)
- Power input and current (Cl. 10)
- Heating (Cl. 11)
- Leakage current and electric strength at operating temperature (Cl. 13)
- Mechanical strength (Cl. 21)
- Provision for earthing (Cl. 27)
- Screws and connections (Cl. 28)
- Resistance to heat and fire (Cl. 30)
- Stability and Mechanical Hazards (Cl. 20)
The full type test covers every clause of IS 302 (Part 2/Sec 23): 2009; the list above is what can be checked on site.
ISI licences under IS 302 (Part 2/Sec 23): 2009
BIS records 54 operative licences (57 including deferred, cancelled or under stop marking). Most licensed factories are in Haryana (12), Delhi (11), Maharashtra (10), Uttar Pradesh (6), Gujarat (5).
IS 302 (Part 2/ Sec 80): 2017 Fans
Editions and amendments of IS 302 (Part 2/ Sec 80): 2017
| Edition | Published | Status |
|---|---|---|
| IS 302 (Part 2/Sec 80):2017 Household and similar electrical appliances - Safety: Part 2 - 80 particular requirements for fans (First Revision) | 31 Jul 2017 | Current, next review 3 Oct 2029 |
Amendments:First Amendment (2023), Second Amendment (2025). Test reports must reflect the standard with its amendments.
Marking fee for IS 302 (Part 2/ Sec 80): 2017
BIS charges an annual minimum marking fee for the ISI mark under IS 302 (Part 2/ Sec 80): 2017, set by unit size, plus a per-unit rate once production passes the minimum:
| Unit size | Minimum marking fee (per year) |
|---|---|
| Large | ₹1,54,000 |
| Medium | ₹1,24,000 |
| Small | ₹77,000 |
| Micro | ₹30,800 |
Unit rate: ₹0.65 per piece. Source: BIS marking fee schedule for Scheme-I products, September 2026.
Sampling and key tests for IS 302 (Part 2/ Sec 80): 2017
From the BIS product manual for IS 302 (Part 2/ Sec 80): 2017 (July 2026), which BIS officers and applicants follow for certification:
Sample quantity:1 no.
Raw material requirements:
- Stampings for fan motors as per IS 648 or any other suitable low loss electrical sheet steel
- Insulation cords as per IS 694 or IS 9968 (Part 1)
- Capacitors for fan motors as per IS 2993 (Part 1) or IS 2993 (Part 2)
Tests BIS can carry out in a day during factory inspection:
- Marking (Cl.7)
- Earth Continuity Test (A-1)
- Electric Strength Test (A-2)
- Functional test (A-3)
- Protection against access to live parts (Cl. 8)
- Power Input and Current (Cl. 10)
- Heating (Cl. 11)
- Leakage Current and Electric Strength at operating temperature (Cl. 13)
- Mechanical Strength (Cl.21)
- Provision for Earthing (Cl. 27)
- Screws and connections (Cl. 28)
- Resistance to heat and fire (Cl. 30)
- Stability and Mechanical Hazards (Cl. 20)
The full type test covers every clause of IS 302 (Part 2/ Sec 80): 2017; the list above is what can be checked on site.
ISI licences under IS 302 (Part 2/ Sec 80): 2017
BIS records 178 operative licences (184 including deferred, cancelled or under stop marking). Most licensed factories are in Haryana (34), Delhi (32), Uttar Pradesh (22), Telangana (20), Himachal Pradesh (15).
IS 302 (Part 2/Sec 75): 2018 Commercial Dispensing Appliances and Vending Machines
Editions and amendments of IS 302 (Part 2/Sec 75): 2018
| Edition | Published | Status |
|---|---|---|
| IS 302 (Part 2/Sec 75):2018 Safety of Household and Similar Electrical Appliances Part 2 Particular Requirements Section 75 Commercial Dispensing Appliances and Vending Machines | 31 Aug 2018 | Current, next review 31 Aug 2028 |
No amendments to the current edition are listed by BIS.
Marking fee for IS 302 (Part 2/Sec 75): 2018
BIS charges an annual minimum marking fee for the ISI mark under IS 302 (Part 2/Sec 75): 2018, set by unit size, plus a per-unit rate once production passes the minimum:
| Unit size | Minimum marking fee (per year) |
|---|---|
| Large | ₹2,38,000 |
| Medium | ₹1,91,000 |
| Small | ₹1,19,000 |
| Micro | ₹47,600 |
Unit rate: ₹83.55 per piece. Source: BIS marking fee schedule for Scheme-I products, September 2026.
Sampling and key tests for IS 302 (Part 2/Sec 75): 2018
From the BIS product manual for IS 302 (Part 2/Sec 75): 2018 (June 2026), which BIS officers and applicants follow for certification:
Sample quantity:1 number.
Tests BIS can carry out in a day during factory inspection:
- Marking (Cl. 7)
- Earth Continuity test (A-1 of IS 302-1)
- Electric strength test (A-2 of IS 302-1)
- Protection against access to live parts (Cl. 8)
- Power input and current (Cl. 10)
- Heating (Cl. 11)
- Leakage current and electric strength at operating temperature (Cl. 13)
- Mechanical strength (Cl. 21)
- Provision for earthing (Cl. 27)
- Screws and connections (Cl. 28)
- Resistance to heat and fire (Cl. 30)
- Stability and Mechanical Hazards (Cl. 20)
The full type test covers every clause of IS 302 (Part 2/Sec 75): 2018; the list above is what can be checked on site.
ISI licences under IS 302 (Part 2/Sec 75): 2018
BIS records 17 operative licences (18 including deferred, cancelled or under stop marking). Most licensed factories are in Karnataka (4), Haryana (4), Maharashtra (3), Tamil Nadu (2), Dadra & Nagar Haveli (1).
IS 302 (Part 2/Sec 7): 2010 Domestic Electric Clothes Washing Machines
Editions and amendments of IS 302 (Part 2/Sec 7): 2010
| Edition | Published | Status |
|---|---|---|
| IS 302 (Part 2/Sec 7):2024 Safety of Household And Similar Electrical Appliances Part 2 Particular Requirements Section 7: Domestic Electric Clothes Washing Machines | 17 Jan 2024 | Current, next review 31 Jan 2029 |
| IS 302 (Part 2/Sec 7):2010 Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 7 domestic electric clothes washing machines (First Revision) | 31 Mar 2010 | Withdrawn 9 Dec 2025 |
No amendments to the current edition are listed by BIS.
Marking fee for IS 302 (Part 2/Sec 7): 2010
BIS charges an annual minimum marking fee for the ISI mark under IS 302 (Part 2/Sec 7): 2010, set by unit size, plus a per-unit rate once production passes the minimum:
| Unit size | Minimum marking fee (per year) |
|---|---|
| Large | ₹3,31,000 |
| Medium | ₹2,65,000 |
| Small | ₹1,65,500 |
| Micro | ₹66,200 |
Unit rate: ₹2 per piece. Source: BIS marking fee schedule for Scheme-I products, September 2026.
Sampling and key tests for IS 302 (Part 2/Sec 7): 2010
From the BIS product manual for IS 302 (Part 2/Sec 7): 2010, which BIS officers and applicants follow for certification:
Raw material requirements:
- Components as per Cl. 24 of IS 302 (Part 2/ Sec 7)
Tests BIS can carry out in a day during factory inspection:
- Earth Continuity test (A-1 of IS 302-2-7)
- Electric strength test (A-2 of IS 302-2-7)
- Functional test (A-3 of IS 302-2-7)
- Marking and Instruction (Cl. 7)
- Protection against access to live parts (Cl. 8)
- Power input and current (Cl. 10)
- Leakage current and Electric strength (Cl. 16)
- Provision for earthing (Cl. 27)
The full type test covers every clause of IS 302 (Part 2/Sec 7): 2010; the list above is what can be checked on site.
ISI licences under IS 302 (Part 2/Sec 7): 2010
BIS records 42 operative licences (43 including deferred, cancelled or under stop marking). Most licensed factories are in Uttar Pradesh (13), Maharashtra (8), Uttarakhand (5), Andhra Pradesh (3), Haryana (3).
IS 302 (Part 2/Sec 21): 2018 Appliances for Stationary Storage Type Electric Water Heaters
Editions and amendments of IS 302 (Part 2/Sec 21): 2018
| Edition | Published | Status |
|---|---|---|
| IS 302 (Part 2/Sec 21):2024 Household and Similar Electrical AppliancesSafety Part 2 Particular Requirements Section 21 Storage Water Heaters | 23 Aug 2024 | Current, next review 31 Aug 2029 |
| IS 302 (Part 2/Sec 21):2018 Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 21 stationary storage type electric water heaters (Second Revision) | 31 Oct 2018 | Current, next review 31 Oct 2023 |
BIS lists 2 current editions of IS 302 (Part 2/Sec 21): 2018. During a changeover both can be used until the date BIS sets for moving to the newer one.
Amendments:First Amendment (2019) to IS 302 (Part 2/Sec 21):2018. Test reports must reflect the standard with its amendments.
Marking fee for IS 302 (Part 2/Sec 21): 2018
BIS charges an annual minimum marking fee for the ISI mark under IS 302 (Part 2/Sec 21): 2018, set by unit size, plus a per-unit rate once production passes the minimum:
| Unit size | Minimum marking fee (per year) |
|---|---|
| Large | ₹1,30,000 |
| Medium | ₹1,04,000 |
| Small | ₹65,000 |
| Micro | ₹26,000 |
Unit rate: ₹6 per piece. Source: BIS marking fee schedule for Scheme-I products, September 2026.
Sampling and key tests for IS 302 (Part 2/Sec 21): 2018
From the BIS product manual for IS 302 (Part 2/Sec 21): 2018, which BIS officers and applicants follow for certification:
Sample quantity:2 numbers
Raw material requirements:
- Components as per Cl. 24 of IS 302 (Part 2/ Sec 21)
Tests BIS can carry out in a day during factory inspection:
- Pressure Test (Cl. 22.101, A.101)
- Protection against access to live parts (Cl. 8)
- High Voltage (Cl. 13.2.2 of IS 302 (Part 1))
- Earthing Connection (Cl. 27)
- Power Input and Current (Cl. 10)
- Heating (Cl. 11)
- Leakage Current & Electric Strength at operating temperature (Cl. 13)
- Leakage Current & Electric Strength (Cl. 16)
- Mechanical Strength (Cl. 21)
- Internal Wiring (Cl. 23)
- Supply connections & external flexible cords (Cl. 25)
- Terminals for external conductors (Cl. 26)
- Provision for Earthing (Cl. 27)
- Screws and Connections (Cl. 28)
- Stability and Mechanical Hazards (Cl. 20)
The full type test covers every clause of IS 302 (Part 2/Sec 21): 2018; the list above is what can be checked on site.
ISI licences under IS 302 (Part 2/Sec 21): 2018
BIS records 28 operative licences (30 including deferred, cancelled or under stop marking). Most licensed factories are in Haryana (24), Maharashtra (4).
IS 302 (Part 2/Sec 35): 2017 Appliances for Electric Instantaneous Water Heaters
Editions and amendments of IS 302 (Part 2/Sec 35): 2017
| Edition | Published | Status |
|---|---|---|
| IS 302 (Part 2/Sec 35):2017 Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 35 electric instantaneous water heaters (Second Revision) | 31 Dec 2017 | Current, next review 31 Dec 2029 |
Amendments:First Amendment (2019). Test reports must reflect the standard with its amendments.
Marking fee for IS 302 (Part 2/Sec 35): 2017
BIS charges an annual minimum marking fee for the ISI mark under IS 302 (Part 2/Sec 35): 2017, set by unit size, plus a per-unit rate once production passes the minimum:
| Unit size | Minimum marking fee (per year) |
|---|---|
| Large | ₹1,04,000 |
| Medium | ₹84,000 |
| Small | ₹52,000 |
| Micro | ₹20,800 |
Unit rate: ₹2.6 per piece. Source: BIS marking fee schedule for Scheme-I products, September 2026.
Sampling and key tests for IS 302 (Part 2/Sec 35): 2017
From the BIS product manual for IS 302 (Part 2/Sec 35): 2017, which BIS officers and applicants follow for certification:
Sample quantity:2 no.
Tests BIS can carry out in a day during factory inspection:
- Earth Continuity test (A-1 of IS 302-1)
- Electric strength test (A-2 of IS 302-1)
- Protection against access to live parts (Cl. 8)
- Power input and current (Cl. 10)
- Heating (Cl. 11)
- Leakage current and electric strength at operating temperature (Cl. 13)
- Mechanical strength (Cl. 21)
- Provision for earthing (Cl. 27)
- Screws and connections (Cl. 28)
- Resistance to heat and fire (Cl. 30)
- Stability and Mechanical Hazards (Cl. 20)
The full type test covers every clause of IS 302 (Part 2/Sec 35): 2017; the list above is what can be checked on site.
ISI licences under IS 302 (Part 2/Sec 35): 2017
BIS records 58 operative licences (62 including deferred, cancelled or under stop marking). Most licensed factories are in Haryana (23), Maharashtra (9), Himachal Pradesh (5), Delhi (5), Uttar Pradesh (4).
IS 302 (Part 1) : 2024 IEC 60335-1:2020 All Electrical Appliances Vacuum Cleaners and Water Suction Cleaning Appliances
Editions and amendments of IS 302 (Part 1) : 2024 IEC 60335-1:2020
| Edition | Published | Status |
|---|---|---|
| IS 302 (Part 1):2024 Household and Similar Electrical Appliances Safety Part 1 General Requirements (Seventh Revision) | 5 Sept 2024 | Current, next review 30 Sept 2029 |
| IS 302 (Part 1):2008 Safety of household and similar electrical appliances: Part 1 general requirements (Sixth Revision) | 31 Aug 2008 | Current, next review 31 Jan 2021 |
BIS lists 2 current editions of IS 302 (Part 1) : 2024 IEC 60335-1:2020. During a changeover both can be used until the date BIS sets for moving to the newer one.
Amendments:First Amendment (2009) to IS 302 (Part 1):2008, Second Amendment (2013) to IS 302 (Part 1):2008, Third Amendment (2014) to IS 302 (Part 1):2008, Fourth Amendment (2015) to IS 302 (Part 1):2008. Test reports must reflect the standard with its amendments.
Sampling and key tests for IS 302 (Part 1) : 2024 IEC 60335-1:2020
From the BIS product manual for IS 302 (Part 1) : 2024 IEC 60335-1:2020 (October 2026), which BIS officers and applicants follow for certification:
Sample quantity:Where the samples are bulky and testing can be
Tests BIS can carry out in a day during factory inspection:
- Marking (Cl.7)
- Earth Continuity Test (A-2 of IS 302(Part 1))
- Electric Strength Test (A-3 of IS 302(Part 1))
- Functional test (A-4 of IS 302(Part 1))
- Protection against access to live parts (Cl. 8)
- Power Input and Current (Cl. 10)
- Leakage Current and Electric Strength at operating temperature (Cl. 13)
- Mechanical Strength (Cl.21)
- Provision for Earthing (Cl. 27)
- Screws and connections (Cl. 28)
- Resistance to heat and fire (Cl. 30)
- Stability and Mechanical Hazards (Cl. 20)
The full type test covers every clause of IS 302 (Part 1) : 2024 IEC 60335-1:2020; the list above is what can be checked on site.
ISI licences under IS 302 (Part 1) : 2024 IEC 60335-1:2020
BIS records 612 operative licences (640 including deferred, cancelled or under stop marking). Most licensed factories are in Haryana (112), Maharashtra (80), Tamil Nadu (80), Uttar Pradesh (76), Gujarat (44).
IS 302-2-76:1999 Electric Fence Energizers
Editions and amendments of IS 302-2-76:1999
| Edition | Published | Status |
|---|---|---|
| IS 302 (Part 2/Sec 76):1999 Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 76 electric fence energizers | 31 Dec 1999 | Current, next review 31 Dec 2029 |
No amendments to the current edition are listed by BIS.
Marking fee for IS 302-2-76:1999
BIS charges an annual minimum marking fee for the ISI mark under IS 302-2-76:1999, set by unit size, plus a per-unit rate once production passes the minimum:
| Unit size | Minimum marking fee (per year) |
|---|---|
| Large | ₹2,70,000 |
| Medium | ₹2,16,000 |
| Small | ₹1,35,000 |
| Micro | ₹54,000 |
Unit rate: ₹12 per piece. Source: BIS marking fee schedule for Scheme-I products, September 2026.
ISI licences under IS 302-2-76:1999
BIS records 43 operative licences (43 including deferred, cancelled or under stop marking). Most licensed factories are in Gujarat (38), Kerala (1), Telangana (1), Tamil Nadu (1), Haryana (1).
IS 302-2-25 Microwave Ovens
Editions and amendments of IS 302-2-25
| Edition | Published | Status |
|---|---|---|
| IS 302 (Part 2/Sec 25):2014 Safety of household and similar electrical appliances: Part 2 Particular requirements: Section 25 Microwave ovens | 31 May 2014 | Current, next review 31 Jan 2030 |
No amendments to the current edition are listed by BIS.
IS 302-2:26 Mains-Powered Electronic Clocks
Editions and amendments of IS 302-2:26
| Edition | Published | Status |
|---|---|---|
| IS 302 (Part 2/Sec 26):2026 Household and Similar Electrical Appliances —— Safety Part 2 Particular Requirements Section 26 Clocks (Second Revision) | 24 Jul 2026 | Current, next review 24 Jul 2031 |
| IS 302 (Part 2/Sec 26):2014 Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 26 clocks (First Revision) | 31 Mar 2014 | Current, next review 31 Jan 2030 |
BIS lists 2 current editions of IS 302-2:26. During a changeover both can be used until the date BIS sets for moving to the newer one.
Amendments:First Amendment (2002) to IS 302 (Part 2/Sec 26):2014. Test reports must reflect the standard with its amendments.
IS 302 (Part 1): 2008 Adapters for Household Appliances
Editions and amendments of IS 302 (Part 1): 2008
| Edition | Published | Status |
|---|---|---|
| IS 302 (Part 1):2024 Household and Similar Electrical Appliances Safety Part 1 General Requirements (Seventh Revision) | 5 Sept 2024 | Current, next review 30 Sept 2029 |
| IS 302 (Part 1):2008 Safety of household and similar electrical appliances: Part 1 general requirements (Sixth Revision) | 31 Aug 2008 | Current, next review 31 Jan 2021 |
BIS lists 2 current editions of IS 302 (Part 1): 2008. During a changeover both can be used until the date BIS sets for moving to the newer one.
Amendments:First Amendment (2009) to IS 302 (Part 1):2008, Second Amendment (2013) to IS 302 (Part 1):2008, Third Amendment (2014) to IS 302 (Part 1):2008, Fourth Amendment (2015) to IS 302 (Part 1):2008. Test reports must reflect the standard with its amendments.
Sampling and key tests for IS 302 (Part 1): 2008
From the BIS product manual for IS 302 (Part 1): 2008 (October 2026), which BIS officers and applicants follow for certification:
Sample quantity:Where the samples are bulky and testing can be
Tests BIS can carry out in a day during factory inspection:
- Marking (Cl.7)
- Earth Continuity Test (A-2 of IS 302(Part 1))
- Electric Strength Test (A-3 of IS 302(Part 1))
- Functional test (A-4 of IS 302(Part 1))
- Protection against access to live parts (Cl. 8)
- Power Input and Current (Cl. 10)
- Leakage Current and Electric Strength at operating temperature (Cl. 13)
- Mechanical Strength (Cl.21)
- Provision for Earthing (Cl. 27)
- Screws and connections (Cl. 28)
- Resistance to heat and fire (Cl. 30)
- Stability and Mechanical Hazards (Cl. 20)
The full type test covers every clause of IS 302 (Part 1): 2008; the list above is what can be checked on site.
IS 302 (Part 2): Section 6: 2009 Induction Stove
Editions and amendments of IS 302 (Part 2): Section 6: 2009
| Edition | Published | Status |
|---|---|---|
| IS 302 (Part 2/Sec 6):2009 Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 6 cooking ranges, hobs, ovens and similar appliances (First Revision) | 31 Dec 2009 | Current, next review 31 Dec 2029 |
No amendments to the current edition are listed by BIS.
Sampling and key tests for IS 302 (Part 2): Section 6: 2009
From the BIS product manual for IS 302 (Part 2): Section 6: 2009, which BIS officers and applicants follow for certification:
Sample quantity:1 no.
Tests BIS can carry out in a day during factory inspection:
- Earth Continuity test (A-1 of IS 302-1)
- Electric strength test (A-2 of IS 302-1)
- Protection against access to live parts (Cl. 8)
- Power input and current (Cl. 10)
- Heating (Cl. 11)
- Leakage current and electric strength at operating temperature (Cl. 13)
- Mechanical strength (Cl. 21)
- Provision for earthing (Cl. 27)
- Screws and connections (Cl. 28)
- Resistance to heat and fire (Cl. 30)
- Stability and Mechanical Hazards (Cl. 20)
The full type test covers every clause of IS 302 (Part 2): Section 6: 2009; the list above is what can be checked on site.
IS 302 (Part 2): Section 15: 2009 Rice Cooker
Editions and amendments of IS 302 (Part 2): Section 15: 2009
| Edition | Published | Status |
|---|---|---|
| IS 302 (Part 2/Sec 15):2009 Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 15 appliances for heating liquids (First Revision) | 31 Dec 2009 | Current, next review 31 Dec 2029 |
No amendments to the current edition are listed by BIS.
Sampling and key tests for IS 302 (Part 2): Section 15: 2009
From the BIS product manual for IS 302 (Part 2): Section 15: 2009, which BIS officers and applicants follow for certification:
Sample quantity:3 numbers
Tests BIS can carry out in a day during factory inspection:
- Earth Continuity test (A-1 of IS 302-1)
- Electric strength test (A-2 of IS 302-1)
- Functional test (A-3 of IS 302-1)
- Marking (Cl. 7)
- Protection against access to live parts (Cl. 8)
- Power input and current (Cl. 10)
- Leakage current and electric strength (Cl. 16)
- Mechanical strength (Cl. 21)
- Provision for earthing (Cl. 27)
- Screws and connections (Cl. 28)
- Creepage distances, clearances and distances (Cl. 29)
- Stability and Mechanical Hazards (Cl. 20)
- Temperature rise (Cl. 17)
The full type test covers every clause of IS 302 (Part 2): Section 15: 2009; the list above is what can be checked on site.
Notifying orders
- Electrical Wires, Cables, Appliances and Protection Devices and Accessories (Quality Control) Order, 2003, No. 189(E), dated 17 Feb 2003 · PDF
- Bureau of Indian Standards Kitchen Appliances (Quality Control) Order, 2018, S.O. 5243(E), dated 10th October, 2018 · PDF
- Electrical Appliances for Kitchen (Quality Control) Order, 2023, S.O. 1128(E), dated 05th March 2024 · PDF
- Electrical Appliances for Skin or Hair care (Quality Control) Order, 2023, S.O. 1125(E), dated 05th March 2024 · PDF
- Electrical appliance fans (Quality Control) Order, 2023, S.O. 1124(E), dated 05th March 2024 · PDF
- Electrical appliance for commercial dispensing and vending (Quality Control) Order, 2023, S.O. 1127(E), dated 05th March 2024 · PDF
- Electrical appliance for domestic clothes washing (Quality Control) Order, 2023, S.O. 1126(E), dated 05th March 2024 · PDF
- Electrical Appliances for domestic water heating (Quality Control) Order, 2023, S.O. 1253(E), dated 05th March 2024 · PDF
How to get an ISI mark licence under IS 302
The licence is granted to the manufacturer for a specific factory and product. Indian factories apply under Scheme-I; overseas factories apply under the Foreign Manufacturers Certification Scheme (FMCS) and must nominate an Authorised Indian Representative.
- Confirm the exact Indian Standard and the varieties to cover
- Get the product tested at a BIS-recognised lab (simplified procedure) or arrange BIS sampling
- Apply on Manak Online with factory, quality-control and test documents
- BIS factory inspection and sample verification
- Grant of licence, then marking with the ISI mark and CM/L number
Timeline. BIS targets 30 days under the simplified procedure (applying with a recent lab test report) and 90 days under the normal procedure. Overseas factories under FMCS typically take around 6 months.
Fees. Application fee ₹1,000 and annual licence fee ₹1,000, inspection charges of ₹7,000 per man-day, testing charges, and an annual minimum marking fee set for each Indian Standard (with concessions for micro and small units).
Mark. Certified products carry the ISI Standard Mark with the IS number and the CM/L-XXXXXXXXXX licence number.
How to get CRS registration under IS 302
Registration is granted to the manufacturer for a specific factory, brand and models. Overseas manufacturers must appoint an Authorised Indian Representative to apply and hold the registration in India.
- Confirm the Indian Standard and group models into a series
- Submit samples to a BIS-recognised lab in India for testing
- Apply on the CRS portal with the test report, factory and brand documents
- BIS review and grant of the R-number registration
- Mark products with the Standard Mark, IS number and R-number
Timeline. Lab testing usually takes 2 to 6 weeks; BIS processing typically takes another 3 to 6 weeks after a complete application with the test report.
Fees. Application and annual licence fees of ₹1,000 each, a processing fee of ₹25,000 per year, and ₹20,000 for each additional test report, plus lab testing charges (BIS Conformity Assessment Amendment Regulations, 2026).
Mark. Certified products carry the BIS Standard Mark (CRS) with the IS number and the R-number.
Frequently asked questions
Is BIS certification mandatory for products under IS 302?
Yes, for the 20 products listed on this page. Each is notified by a government order and needs an ISI mark licence or CRS registration (depending on the product) before it can be made, imported or sold in India. Other products that merely use IS 302 are not automatically covered.
Which part of IS 302 applies to my product?
IS 302 has 20 parts or editions referenced in BIS orders. Find your product in the table above to see its exact part. Where a product is covered by more than one standard, all of them apply.
How long does ISI mark under IS 302 take?
BIS targets 30 days under the simplified procedure (applying with a recent lab test report) and 90 days under the normal procedure. Overseas factories under FMCS typically take around 6 months.
How long does CRS registration under IS 302 take?
Lab testing usually takes 2 to 6 weeks; BIS processing typically takes another 3 to 6 weeks after a complete application with the test report.
Other standards in Household Electrical goods
- IS 368 Electric Immersion Water Heaters
- IS 418 Tungsten Filament General Service Electric Lamps (upto100 W )
- IS 694 PVC Insulated Cables for Working Voltages up to and Including 1100V
- IS 2082 Stationary Storage Type Electric Water Heaters
- IS 3854 Switches for Domestic and Similar Purposes
- IS 4250 Domestic Electric Food Mixer (Liquidizers and Grinders) and Centrifugal Juicer
- IS 8828 Electrical Accessories-Circuit Breakers for Overcurrent Protection for Household and Similar Installations
- IS 9968 2 products
- IS 10322 8 products
- IS 12640 2 products
Source: BIS lists of products under compulsory certification (Scheme-I, Scheme-II), checked October 2026. See the full BIS product list or all Indian Standards.
Not sure which certification your product needs?
Talk to a team led by former BIS Directors. We'll map every approval your product needs before you spend on testing.