Skip to content
BIS certification guide

BIS Certification for Switches, MCBs, Plugs and Sockets

Wiring accessories for homes and similar installations need an ISI mark licence, each under its own Indian Standard: IS 3854 for switches, IS/IEC 60898 (Part 1) for MCBs, IS 12640 for RCCBs and RCBOs and IS 1293 for plugs and sockets. Boxes, trunking, switch socket outlets and lamp holders joined in 2024. Dimmers for LED products need CRS registration instead, and PVC insulating tape is no longer covered.

BIS for switches, MCBs, plugs and sockets?

Tell us the product and we'll confirm which rule applies.

We reply within one working day. Prefer to talk? +91 99538 54092

Updated 10 November 2026. Checked against the BIS lists of products under compulsory certification and the orders in the Gazette of India.

Which BIS rule applies to your switch, MCB or socket

ProductWhat it needsIndian StandardNotified under
Switches for domestic and similar purposesISI mark licenceIS 3854, 2023 editionS.O. 189(E), 17 February 2003, as amended
Miniature circuit-breakers (MCBs)ISI mark licenceIS/IEC 60898 (Part 1); listed by BIS as IS 8828S.O. 189(E)
RCCBs, without overcurrent protectionISI mark licenceIS 12640 (Part 1), 2024 editionS.O. 189(E)
RCBOs, with overcurrent protectionISI mark licenceIS 12640 (Part 2)S.O. 189(E)
Plugs and socket-outlets up to 250 V and 16 AISI mark licenceIS 1293, 2019 editionS.O. 2166(E), 7 June 2021, applies from 1 June 2022
Switch socket outlets, non-interlock typeISI mark licenceIS 15787, 2025 editionElectrical Accessories (Quality Control) Order, 2023, S.O. 43(E)
Boxes and enclosures for electrical accessoriesISI mark licenceIS 14772:2020S.O. 43(E)
Cable trunking and ducting for walls or ceilingsISI mark licenceIS 14927 (Part 2):2001S.O. 43(E)
Bayonet lamp holdersISI mark licenceIS 1258, 2024 editionS.O. 43(E)
Poly-laminated aluminium cable wrapISI mark licenceIS 16012:2012S.O. 43(E), Table-2
Live working gloves and insulating matsISI mark licenceIS 13774:2021, IS 15652:2006S.O. 43(E)
Dimmers for LED productsCRS registrationIS/IEC 60669-2-1:2021MeitY’s Compulsory Registration Order, 2021
PVC insulating tapeNo longer compulsoryIS 7809 (Part 3/Sec 1)Omitted by S.O. 187(E), 13 January 2026
Category A AC circuit-breakers up to 630 A, 440 V ACScheme-X licenceIS/IEC 60947-2:2016Electrical Equipment (Quality Control) Order, 2020, S.O. 4044(E)
Other industrial switchgear and controlgearDeferred until further ordersIS/IEC 60947 seriesS.O. 5038(E), 6 November 2025

Every ISI item here is a Scheme-I product. BIS grants the licence to the manufacturer for one factory and one Indian Standard, inspects the factory, and has samples tested at a BIS or BIS-recognised laboratory before grant; the product then carries the ISI mark with the IS number and CM/L licence number. Overseas factories apply under the Foreign Manufacturers Certification Scheme and nominate an Authorised Indian Representative. Each order applies the latest edition of its standard, with amendments, as BIS notifies it.

Switches: IS 3854

Switches for domestic and similar purposes have been under the ISI mark through the Electrical Wires, Cables, Appliances and Protection Devices and Accessories (Quality Control) Order, 2003 (S.O. 189(E), 17 February 2003, as amended), the same order that covers house wire, MCBs and RCCBs. The current standard is IS 3854:2023, the third revision, with a first amendment in 2026. BIS’s records show 330 licences for IS 3854, 299 of them operative, 141 of them in Maharashtra. BIS recognises 24 laboratories for the standard. Aaditech has secured 20+ licences for household switches.

Dimmers for LED products: CRS, not ISI

A dimmer for LED products is an electronic switch, and it sits on the CRS list rather than the ISI list. It is registered under IS/IEC 60669-2-1, the standard for electronic switches for household and similar fixed installations. BIS moved the product to the 2021 edition by a guideline of 27 September 2024; the extended last date of 12 April 2025 has passed, so new and existing registrations must meet IS/IEC 60669-2-1:2021. See the LED dimmer guidelines.

MCBs: IS/IEC 60898 (Part 1)

Miniature circuit-breakers for overcurrent protection in household and similar installations need an ISI mark licence under S.O. 189(E). BIS’s list still names the product against IS 8828, the standard it was first notified under. IS 8828:1996 has been replaced by IS/IEC 60898 (Part 1), the Indian version of IEC 60898-1, and the 2015 edition is current. Aaditech has secured 30+ MCB licences, certified against IS/IEC 60898-1.

RCCBs and RCBOs: IS 12640

Residual current devices for household and similar use are covered by the same 2003 order, in two parts:

  • RCCBs, residual current circuit-breakers without integral overcurrent protection, to IS 12640 (Part 1). The 2024 edition, the third revision, is current. BIS’s records show 30 licences, all operative.
  • RCBOs, which add overcurrent protection, to IS 12640 (Part 2), the 2016 edition. BIS lists them as “RCVOs”. BIS’s records show 9 licences.

BIS recognises only 5 laboratories for Part 1 and 4 for Part 2, so plan testing early.

Industrial circuit-breakers and switchgear: Scheme-X

Circuit-breakers, switches and contactors for industrial use are specified under the IS/IEC 60947 series, not the household standards above, and they are certified under Scheme-X. The Electrical Equipment (Quality Control) Order, 2020 (S.O. 4044(E), 11 November 2020), issued by the Ministry of Heavy Industries, lists them in phases. Only one phase is in force: Sr. No. 1.1(a), Category A AC circuit-breakers up to 630 A and up to 440 V AC to IS/IEC 60947-2:2016, from 10 November 2024. S.O. 5038(E) of 6 November 2025 deferred every other category until further orders, including breakers above 630 A, Category B breakers, DC breakers, switch-disconnectors, contactors, motor starters, control circuit devices, proximity switches and emergency stop devices. See BIS Scheme-X certification.

Plugs and socket-outlets: IS 1293

Plugs and socket-outlets rated up to 250 V and 16 A need an ISI mark licence under the Plugs and Socket-Outlets and Alternating Current Direct Connected Static Prepayment Meters for Active Energy (Quality Control) Order, 2021 (S.O. 2166(E), 7 June 2021). It replaced the 2019 order, S.O. 4353(E), and applies from 1 June 2022. The current standard is IS 1293:2019, the fourth revision, with amendments in 2020 and 2023. BIS’s records show 585 licences for IS 1293, 568 of them operative.

MeitY’s CRS FAQs (Q46) settle a question that comes up with imported electronics: because plugs and sockets are notified by DPIIT under Scheme-I, all plugs and sockets must comply with IS 1293, and ones built to other international standards are not accepted. The FAQs also list plugs, sockets and connectors, switches, lamp holders and power cords among the typical safety critical components of CRS products.

Switch socket outlets, boxes, trunking and lamp holders

The Electrical Accessories (Quality Control) Order, 2023 (S.O. 43(E), 1 January 2024) added a second group of wiring accessories. It came into force on 2 July 2024 for most manufacturers, with three more months for small enterprises and six more for micro enterprises, and it does not apply to goods made in India for export. It covers:

  • Switch socket outlets, non-interlock type, IS 15787. The 2025 edition, for switched socket-outlets without interlock for fixed installations, is current. BIS’s records show 79 licences, and the product manual asks for 15 pieces.
  • Boxes and enclosures for electrical accessories in household and similar fixed installations, IS 14772:2020. BIS’s records show 125 licences.
  • Cable trunking and ducting systems for mounting on walls or ceilings, IS 14927 (Part 2):2001. Only this part of IS 14927 is named.
  • Bayonet lamp holders, IS 1258, now the 2024 edition. The order names no other kind of lamp holder. BIS’s records show 56 licences.
  • Live working gloves of insulating material, IS 13774:2021, and insulating mats for electrical purposes, IS 15652:2006.
  • Poly-laminated aluminium cable wrap, IS 16012:2012, listed in a separate table that applied 18 months after publication.

Accessories that do not need BIS

  • PVC insulating tape. The 2023 order listed pressure sensitive adhesive PVC insulating tape under IS 7809 (Part 3/Sec 1). S.O. 187(E) of 13 January 2026 omitted that entry from the date of its publication, so the ISI mark is no longer compulsory for it. BIS’s Scheme-I list still shows the product, with the amendment among its orders, and BIS’s records show 62 licences for the standard.
  • Distribution boards and consumer units are not on BIS’s lists as products. The MCBs, RCCBs and RCBOs fitted in them each need their own ISI mark.
  • Fuses and PVC conduit pipes are not on BIS’s lists. Asbestos cement cable conduits and troughs are, under IS 8870 and the asbestos cement products order: see asbestos cement cable conduits.
  • Industrial switchgear outside Sr. No. 1.1(a) of the Electrical Equipment order, whose dates stand deferred until further orders.
  • Goods made in India for export under the 2021 plugs order and the 2023 accessories order.

Testing

An ISI application is backed by a test report from a laboratory BIS has recognised for the standard, or by samples BIS draws itself. BIS recognises 24 laboratories for IS 3854, 22 for IS 1293, 13 for IS 14772, 11 for IS 1258 and 8 for IS 15787. A dimmer registration under CRS is tested at a BIS-recognised laboratory and filed on the CRS portal. The cables these accessories are wired with need licences of their own: see BIS for cables and wires.

BIS product pages for switches, MCBs, plugs and sockets

Frequently asked questions

Is BIS certification mandatory for electrical switches?

Yes. Switches for domestic and similar purposes need an ISI mark licence under IS 3854, now the 2023 edition, notified under the Electrical Wires, Cables, Appliances and Protection Devices and Accessories (Quality Control) Order, 2003. Dimmers for LED products are different: they need CRS registration under IS/IEC 60669-2-1:2021.

Which BIS standard applies to MCBs?

BIS's list names IS 8828, which has been replaced by IS/IEC 60898 (Part 1), the Indian version of IEC 60898-1. MCBs for household and similar installations need an ISI mark licence. Industrial circuit-breakers to IS/IEC 60947-2 come under Scheme-X instead.

Do RCCBs and RCBOs need the ISI mark?

Yes. RCCBs, residual current circuit-breakers without overcurrent protection, need a licence under IS 12640 (Part 1), and RCBOs, which include overcurrent protection, under IS 12640 (Part 2). Both are notified under S.O. 189(E) of 2003.

Is BIS required for plugs and sockets?

Yes. Plugs and socket-outlets rated up to 250 V and 16 A need an ISI mark licence under IS 1293. The Plugs and Socket-Outlets order, S.O. 2166(E) of 7 June 2021, applies from 1 June 2022. MeitY's CRS FAQs add that plugs and sockets built to other international standards are not accepted: they must meet IS 1293.

Does PVC insulation tape need BIS certification?

Not any more. The Electrical Accessories (Quality Control) Order, 2023 listed PVC insulating tape under IS 7809 (Part 3/Sec 1), but S.O. 187(E) of 13 January 2026 omitted that entry with effect from its publication, so the ISI mark is now voluntary for it.

Do MCCBs and other industrial switchgear need BIS?

Partly. Under the Electrical Equipment (Quality Control) Order, 2020, Category A AC circuit-breakers up to 630 A and 440 V AC to IS/IEC 60947-2 have needed a Scheme-X licence since 10 November 2024. Every other category, including higher ratings, switch-disconnectors and contactors, was deferred until further orders by S.O. 5038(E) of 6 November 2025.

Related pages

BIS lists checked 10 November 2026. Orders change often; confirm the current notification before applying.

Not sure which certification your product needs?

Talk to a team led by former BIS Directors. We'll map every approval your product needs before you spend on testing.

Call WhatsApp Get a quote