IS 6419 BIS Certification for Welding Rode and Bare Electrodes for Gas Shielded Arc Welding of Structural Steel

About IS 6419

Editions and amendments of IS 6419

Amendments:First Amendment (2008), Second Amendment (2025). Test reports must reflect the standard with its amendments.

Marking fee for IS 6419

BIS charges an annual minimum marking fee for the ISI mark under IS 6419, set by unit size, plus a per-unit rate once production passes the minimum:

Unit rate: ₹0.12 per kg.. Source: BIS marking fee schedule for Scheme-I products, September 2026.

ISI licences under IS 6419

BIS records 111 operative licences (115 including deferred, cancelled or under stop marking). Most licensed factories are in Maharashtra (14), Punjab (12), Tamil Nadu (11), Rajasthan (11), Gujarat (9).

Testing against IS 6419

BIS inspects the factory and has samples tested to the full Indian Standard at a BIS or BIS-recognised laboratory. After grant, the factory keeps testing production under the Scheme of Inspection and Testing, and BIS draws factory and market samples.

The test report has to cover every clause of IS 6419 that applies to the product, in the edition current on the date of testing. When BIS revises IS 6419 or replaces it with a new edition, existing licence holders move to the new edition by the date BIS sets in its notification.

How to get an ISI mark licence under IS 6419

The licence is granted to the manufacturer for a specific factory and product. Indian factories apply under Scheme-I; overseas factories apply under the Foreign Manufacturers Certification Scheme (FMCS) and must nominate an Authorised Indian Representative.

1. Confirm the exact Indian Standard and the varieties to cover
2. Get the product tested at a BIS-recognised lab (simplified procedure) or arrange BIS sampling
3. Apply on Manak Online with factory, quality-control and test documents
4. BIS factory inspection and sample verification
5. Grant of licence, then marking with the ISI mark and CM/L number

Timeline. BIS targets 30 days under the simplified procedure (applying with a recent lab test report) and 90 days under the normal procedure. Overseas factories under FMCS typically take around 6 months.

Fees. Application fee ₹1,000 and annual licence fee ₹1,000, inspection charges of ₹7,000 per man-day, testing charges, and an annual minimum marking fee set for each Indian Standard (with concessions for micro and small units).

Mark. Certified products carry the ISI Standard Mark with the IS number and the CM/L-XXXXXXXXXX licence number.

Frequently asked questions

Other standards in Welding Rods and Electrodes

• IS 814 Covered Electrodes for Manual Metal Arc Welding of Carbon and Carbon Manganese Steel

Source: BIS lists of products under compulsory certification (Scheme-I, Scheme-II), checked October 2026. See the full BIS product list or all Indian Standards.