IS 8510 BIS Certification
2 products must be certified by BIS against IS 8510 and carry the ISI mark. Find your product and its exact part below.
Products under IS 8510
| Product | Part / edition | Scheme |
|---|---|---|
| Steel Wire for Banding of Armatures and Rotors Part II Specific Requirements for Magnetic Banding Wires | IS 8510 (Part II): 1977 | ISI mark |
| Tinned Steel Wire for Banding of Armatures and Rotors Part III Specific Requirements for Non-magnetic Banding Wires | IS 8510 (PartIII): 1977 | ISI mark |
Parts of IS 8510 at a glance
| Part | Current edition | Amendments | Operative ISI licences | Min. marking fee (large unit) |
|---|---|---|---|---|
| IS 8510 (Part II): 1977 Steel Wire for Banding of Armatures and Rotors Part II Specific Requirements for Magnetic Banding Wires | IS 8510 (Part 1 to 3):1977 | 1 | — | — |
| IS 8510 (PartIII): 1977 Tinned Steel Wire for Banding of Armatures and Rotors Part III Specific Requirements for Non-magnetic Banding Wires | IS 8510 (Part 1 to 3):1977 | 1 | — | — |
Details by part
IS 8510 (Part II): 1977 Steel Wire for Banding of Armatures and Rotors Part II Specific Requirements for Magnetic Banding Wires
Editions and amendments of IS 8510 (Part II): 1977
| Edition | Published | Status |
|---|---|---|
| IS 8510 (Part 1 to 3):1977 Specification for tinned steel wire for banding of armatures and rotors | 31 Oct 1977 | Current, next review 31 Mar 2027 |
Amendments:First Amendment (1985). Test reports must reflect the standard with its amendments.
IS 8510 (PartIII): 1977 Tinned Steel Wire for Banding of Armatures and Rotors Part III Specific Requirements for Non-magnetic Banding Wires
Editions and amendments of IS 8510 (PartIII): 1977
| Edition | Published | Status |
|---|---|---|
| IS 8510 (Part 1 to 3):1977 Specification for tinned steel wire for banding of armatures and rotors | 31 Oct 1977 | Current, next review 31 Mar 2027 |
Amendments:First Amendment (1985). Test reports must reflect the standard with its amendments.
Notifying orders
- Steel and Steel Products (Quality Control) Order, 2020, S.O. 756(E), dated 14-02-2020 · PDF
How to get an ISI mark licence under IS 8510
The licence is granted to the manufacturer for a specific factory and product. Indian factories apply under Scheme-I; overseas factories apply under the Foreign Manufacturers Certification Scheme (FMCS) and must nominate an Authorised Indian Representative.
- Confirm the exact Indian Standard and the varieties to cover
- Get the product tested at a BIS-recognised lab (simplified procedure) or arrange BIS sampling
- Apply on Manak Online with factory, quality-control and test documents
- BIS factory inspection and sample verification
- Grant of licence, then marking with the ISI mark and CM/L number
Timeline. BIS targets 30 days under the simplified procedure (applying with a recent lab test report) and 90 days under the normal procedure. Overseas factories under FMCS typically take around 6 months.
Fees. Application fee ₹1,000 and annual licence fee ₹1,000, inspection charges of ₹7,000 per man-day, testing charges, and an annual minimum marking fee set for each Indian Standard (with concessions for micro and small units).
Mark. Certified products carry the ISI Standard Mark with the IS number and the CM/L-XXXXXXXXXX licence number.
Frequently asked questions
Is BIS certification mandatory for products under IS 8510?
Yes, for the 2 products listed on this page. Each is notified by a government order and needs a valid BIS licence (ISI mark) before it can be made, imported or sold in India. Other products that merely use IS 8510 are not automatically covered.
Which part of IS 8510 applies to my product?
IS 8510 has 2 parts or editions referenced in BIS orders. Find your product in the table above to see its exact part. Where a product is covered by more than one standard, all of them apply.
How long does ISI mark under IS 8510 take?
BIS targets 30 days under the simplified procedure (applying with a recent lab test report) and 90 days under the normal procedure. Overseas factories under FMCS typically take around 6 months.
Other standards in Steel and Iron Products
- IS 277 Galvanized Steel Sheets ( Plain and Corrugated)
- IS 280 Mild Steel Wire for General Engineering Purposes
- IS 412 Expanded Metal Steel Sheets for General Purposes
- IS 432 2 products
- IS 513 2 products
- IS 648 Cold Rolled Non-oriented Electrical Steel Sheets and Strip-fully Processed Type (CRNO)
- IS 963 Chrome Molybdenum Steel Bars and Rods for Aircraft Purposes
- IS 1029 Hot Rolled Steel Strip (bailing)
- IS 1079 Hot Rolled Carbon Steel Sheet, Plate and Strip —
- IS 1110 Ferrosilicon
Source: BIS lists of products under compulsory certification (Scheme-I, Scheme-II), checked October 2026. See the full BIS product list or all Indian Standards.
Not sure which certification your product needs?
Talk to a team led by former BIS Directors. We'll map every approval your product needs before you spend on testing.