Skip to content
NABL accredited testing

BS 7889 Testing: Thermosetting Non-Armoured Cables

NABL accredited testing of thermosetting non-armoured cables to BS 7889: 21 tests, each against its clause.

Independent private consultancy. Aaditech is not BIS or any government department and is not affiliated with or endorsed by them. Licences are granted only by the authority, and you can apply directly on its portal. Our consultancy fees are separate from official fees.

StandardBS 7889
CoversElectric cables-Thermosetting insulated, non- armoured cables with a voltage of 600/1000 V, for fixed installation
Accredited tests21
AccreditationNABL, ISO/IEC 17025:2017
CategoryCable & Wire Testing

BS 7889 tests we offer

#TestClause / method
1Pressure Test at High TemperatureBS 7889 & BS 7655-1.3 /BS 7655-4.2
2Abrasion resistanceBS 7889: 2012 (Annex C)
3Ageing in Air OvenBS 7889 & BS 7655-1.3 /BS 7655-4.2
4Bending Test at Low TemperatureBS 7889 & BS 7655-1.3 /BS 7655-4.2
5Clarity and durabilityBS 7889 & BS EN 50396
6Compatibility ( Tensile Strength)BS 7889: 2012 (Annex B)
7Compatibility (Elongation at break)BS 7889: 2012 (Annex B)
8Conductor ResistanceBS 7889 & BS EN 60228
9Durability of printed informationBS 7889 & BS EN 50396
10elongation at break on Insulation and SheathBS 7889 & BS 7655-1.3 /BS 7655-4.2
11Elongation Test at Low TemperatureBS 7889 & BS 7655-1.3 /BS 7655-4.2
12Flame propagation single cableBS 7889 & BS EN 60332-1-2
13Heat Shock TestBS 7889 & BS 7655-1.3 /BS 7655-4.2
14Insulation resistanceBS 7889 & BS 7655-1.3
15Length of layBS 7889 & BS 7889: 2012
16Loss of MassBS 7889 & BS 7655-1.3 /BS 7655-4.2
17OvalityBS 7889 & BS EN 50396
18Shrinkage test on insulationBS 7889 & BS EN 60811-502
19Tensile strength and on Insulation and SheathBS 7889 & BS 7655-1.3 /BS 7655-4.2
20Thickness of Insulation & SheathBS 7889 & BS EN 50396
21Voltage withstandBS 7889 & (Annex E)

How BS 7889 testing works

  1. Tell us the purpose. Export, a tender, a customer requirement or a design check. The purpose decides which clauses and which laboratory.
  2. Get the sample list and quote. We confirm the tests, the number of samples and the timeline for your product and its variants.
  3. Send samples. We help with labels, the test request and any technical documents the tests need.
  4. Testing and report. Tests are carried out under NABL accreditation and the report lists each clause, the requirement and the result.
  5. Review and use. We check the report before you submit it to a regulator, a tender authority or your customer, and help if they raise a query.

Frequently asked questions

Which BS 7889 tests are NABL accredited?

All 21 tests listed on this page are within NABL accreditation (ISO/IEC 17025), each against the clause of BS 7889 shown next to it. The report carries the NABL accreditation mark for these tests.

Is the BS 7889 test report accepted outside India?

NABL is a signatory to the ILAC Mutual Recognition Arrangement, so its accredited reports are recognised by accreditation bodies in other member countries. Your buyer or regulator still decides what it accepts, so we confirm their requirement before testing.

How many samples are needed for BS 7889 testing?

It depends on the product, its variants and the tests you need. Share the product details and the purpose of the test (BIS, tender or customer) and we will send the sample list and a quote.

Can you test only some clauses of BS 7889?

Yes. For a tender, a customer complaint or a design check, we can test selected clauses. For BIS certification or a type test, every applicable clause has to be covered.

Other cable & wire testing

All NABL testing categories

See the NABL testing service for how we work. Tests listed are within NABL accreditation (ISO/IEC 17025).

Not sure which certification your product needs?

Talk to a team led by former BIS Directors. We'll map every approval your product needs before you spend on testing.

Call WhatsApp Get a quote