IEC 60811 Testing: Test Methods for Cable Materials
NABL accredited testing of test methods for cable materials to IEC 60811: 6 tests, each against its clause.
Independent private consultancy. Aaditech is not BIS or any government department and is not affiliated with or endorsed by them. Licences are granted only by the authority, and you can apply directly on its portal. Our consultancy fees are separate from official fees.
| Standard | IEC 60811 |
|---|---|
| Covers | Electric and optical fibre cables - Test methods for non-metallic materials; Test Electric and Optical Fiber Cables – Test Method for Non-Metallic Material |
| Accredited tests | 6 |
| Accreditation | NABL, ISO/IEC 17025:2017 |
| Category | Cable & Wire Testing |
IEC 60811 tests we offer
Electric and optical fibre cables - Test methods for non-metallic materials
| # | Test | Clause / method |
|---|---|---|
| 1 | Ageing in an air oven (Elongation at break) | IEC 60811-401 |
| 2 | Ageing in an air oven (Tensile strength) | IEC 60811-401 |
| 3 | Tests for determining the mechanical properties of insulating and sheathing compounds (Elongation at break) | IEC 60811-501 |
| 4 | Tests for determining the mechanical properties of insulating and sheathing compounds (Tensile strength) | IEC 60811-501 |
Test Electric and Optical Fiber Cables – Test Method for Non-Metallic Material
| # | Test | Clause / method |
|---|---|---|
| 1 | Mineral oil immersion tests for sheaths (Elongation at break) | IEC 60811-404 |
| 2 | Mineral oil immersion tests for sheaths (Tensile strength) | IEC 60811-404 |
How IEC 60811 testing works
- Tell us the purpose. Export, a tender, a customer requirement or a design check. The purpose decides which clauses and which laboratory.
- Get the sample list and quote. We confirm the tests, the number of samples and the timeline for your product and its variants.
- Send samples. We help with labels, the test request and any technical documents the tests need.
- Testing and report. Tests are carried out under NABL accreditation and the report lists each clause, the requirement and the result.
- Review and use. We check the report before you submit it to a regulator, a tender authority or your customer, and help if they raise a query.
Frequently asked questions
Which IEC 60811 tests are NABL accredited?
All 6 tests listed on this page are within NABL accreditation (ISO/IEC 17025), each against the clause of IEC 60811 shown next to it. The report carries the NABL accreditation mark for these tests.
Is the IEC 60811 test report accepted outside India?
NABL is a signatory to the ILAC Mutual Recognition Arrangement, so its accredited reports are recognised by accreditation bodies in other member countries. Your buyer or regulator still decides what it accepts, so we confirm their requirement before testing.
How many samples are needed for IEC 60811 testing?
It depends on the product, its variants and the tests you need. Share the product details and the purpose of the test (BIS, tender or customer) and we will send the sample list and a quote.
Can you test only some clauses of IEC 60811?
Yes. For a tender, a customer complaint or a design check, we can test selected clauses. For BIS certification or a type test, every applicable clause has to be covered.
Other cable & wire testing
- IS 10810 Methods of Test for Cables
- IS 7098 XLPE Insulated Cables
- IS 1554 PVC Insulated Heavy Duty Cables
- IS 9968 Elastomer Insulated Cables
- IS 17505 Fire Survival Cables
- IS 6380 Elastomeric Insulation & Sheath for Cables
- IS 5831 PVC Insulation & Sheath for Cables
- IS 4289 Flexible Lift Cables
- IS 16246 Fire Resistant Circuit Integrity Cables
- IS 8130 Conductors for Insulated Cables
- IS 17293 Solar PV Cables
- IS 14494 Flexible Mining Cables
- IS 17048 HFFR Cables
- IS 694 PVC Insulated Cables
- IS 2465 Cables for Motor Vehicles
- IS 3975 Steel Armour Wires & Tapes for Cables
- IS 14255 Aerial Bunched Cables
- IS 9857 Welding Cables
- IEC 60502 Power Cables 1 kV to 30 kV
- ANSI/TIA 568-C Ethernet (Twisted-Pair) Cables
- IEC 60245 Rubber Insulated Flexible Cables
- BS EN 50525 Low Voltage Energy Cables
- IEC 60227 PVC Insulated Cables up to 450/750 V
- BS 7846 Fire Resistant Armoured Cables
- BS 7629 Fire Resistant Screened Cables
- BS EN 50618 Solar PV Cables
- IEC 62930 Solar PV Cables
- BS 7655 Cable Insulation & Sheathing Materials
- BS EN 50288 Communication & Control Cables
- BS 6004 PVC Insulated & Sheathed Cables
- PAS 5308 Control & Instrumentation Cables
- ISO 6722 Automotive Cables
- BS 7889 Thermosetting Non-Armoured Cables
- BS EN 50363 Cable Insulation & Sheathing Materials
- BS 5467 Thermosetting Armoured Cables
- BS 6195 Flexible Cables for Coil Leads
- HD 626 Aerial Bunched Cables
- BS 6231 Single Core PVC Flexible Cables
- BS EN 50396 Non-Electrical Test Methods for Cables
All NABL testing categories
- Cable & Wire Testing 1,558 accredited tests
- Conductor & Insulating Mat Testing 134 accredited tests
- Battery & Cell Testing 583 accredited tests
- Household Appliance Testing 384 accredited tests
- Overhead Line Hardware Testing 128 accredited tests
- LED Lamp & Luminaire Testing 573 accredited tests
- IT & Electronics Safety Testing 181 accredited tests
- UPS Safety Testing 46 accredited tests
- Environmental & Reliability Testing 312 accredited tests
See the NABL testing service for how we work. Tests listed are within NABL accreditation (ISO/IEC 17025).
Not sure which certification your product needs?
Talk to a team led by former BIS Directors. We'll map every approval your product needs before you spend on testing.