BS EN 50363 Testing: Cable Insulation & Sheathing Materials
NABL accredited testing of cable insulation & sheathing materials to BS EN 50363: 21 tests, each against its clause.
Independent private consultancy. Aaditech is not BIS or any government department and is not affiliated with or endorsed by them. Licences are granted only by the authority, and you can apply directly on its portal. Our consultancy fees are separate from official fees.
| Standard | BS EN 50363 |
|---|---|
| Covers | Insulating, sheathing and covering materials for low voltage energy cables Part 4-1: PVC sheathing compounds; Insulating, sheathing and covering materials for low voltage energy cables; Part 2-1: Cross- linked elastomeric sheathing compounds; Insulating, sheathing and covering materials for low voltage energy cables Part 2-1: Cross- linked elastomeric sheathing compounds |
| Accredited tests | 21 |
| Accreditation | NABL, ISO/IEC 17025:2017 |
| Category | Cable & Wire Testing |
BS EN 50363 tests we offer
Insulating, sheathing and covering materials for low voltage energy cables Part 4-1: PVC sheathing compounds
| # | Test | Clause / method |
|---|---|---|
| 1 | Elongation test at low temperature | BS EN 50363-4-1 |
| 2 | After immersion in mineral oil | BS EN 50363-4-1 |
| 3 | Ageing in air oven | BS EN 50363-4-1 |
| 4 | Bending test at low temperature | BS EN 50363-4-1 |
| 5 | Elongation at break | BS EN 50363-4-1 |
| 6 | Heat shock test | BS EN 50363-4-1 |
| 7 | Loss of mass test | BS EN 50363-4-1 |
| 8 | Pressure test at high temperature | BS EN 50363-4-1 |
| 9 | Tensile strength | BS EN 50363-4-1 |
| 10 | Thermal Stability | BS EN 50363-4-1 |
Insulating, sheathing and covering materials for low voltage energy cables
| # | Test | Clause / method |
|---|---|---|
| 1 | After immersion in mineral oil | BS EN 50363-2-1 |
| 2 | Ageing in air oven | BS EN 50363-2-1 |
| 3 | Carbon black test Content | BS EN 50363-2-1 |
| 4 | Elongation test at low temperature | BS EN 50363-2-1 |
| 5 | Pressure test at high temperature | BS EN 50363-2-1 |
Part 2-1: Cross- linked elastomeric sheathing compounds
| # | Test | Clause / method |
|---|---|---|
| 1 | Ageing in air bomb | BS EN 50363-2-1 |
| 2 | Bending test at low temperature | BS EN 50363-2-1 |
| 3 | Hot set Test | BS EN 50363-2-1 |
| 4 | Ozone resistance test | BS EN 50363-2-1 |
Insulating, sheathing and covering materials for low voltage energy cables Part 2-1: Cross- linked elastomeric sheathing compounds
| # | Test | Clause / method |
|---|---|---|
| 1 | elongation at break | BS EN 50363-2-1 |
| 2 | Tensile strength | BS EN 50363-2-1 |
How BS EN 50363 testing works
- Tell us the purpose. Export, a tender, a customer requirement or a design check. The purpose decides which clauses and which laboratory.
- Get the sample list and quote. We confirm the tests, the number of samples and the timeline for your product and its variants.
- Send samples. We help with labels, the test request and any technical documents the tests need.
- Testing and report. Tests are carried out under NABL accreditation and the report lists each clause, the requirement and the result.
- Review and use. We check the report before you submit it to a regulator, a tender authority or your customer, and help if they raise a query.
Frequently asked questions
Which BS EN 50363 tests are NABL accredited?
All 21 tests listed on this page are within NABL accreditation (ISO/IEC 17025), each against the clause of BS EN 50363 shown next to it. The report carries the NABL accreditation mark for these tests.
Is the BS EN 50363 test report accepted outside India?
NABL is a signatory to the ILAC Mutual Recognition Arrangement, so its accredited reports are recognised by accreditation bodies in other member countries. Your buyer or regulator still decides what it accepts, so we confirm their requirement before testing.
How many samples are needed for BS EN 50363 testing?
It depends on the product, its variants and the tests you need. Share the product details and the purpose of the test (BIS, tender or customer) and we will send the sample list and a quote.
Can you test only some clauses of BS EN 50363?
Yes. For a tender, a customer complaint or a design check, we can test selected clauses. For BIS certification or a type test, every applicable clause has to be covered.
Other cable & wire testing
- IS 10810 Methods of Test for Cables
- IS 7098 XLPE Insulated Cables
- IS 1554 PVC Insulated Heavy Duty Cables
- IS 9968 Elastomer Insulated Cables
- IS 17505 Fire Survival Cables
- IS 6380 Elastomeric Insulation & Sheath for Cables
- IS 5831 PVC Insulation & Sheath for Cables
- IS 4289 Flexible Lift Cables
- IS 16246 Fire Resistant Circuit Integrity Cables
- IS 8130 Conductors for Insulated Cables
- IS 17293 Solar PV Cables
- IS 14494 Flexible Mining Cables
- IS 17048 HFFR Cables
- IS 694 PVC Insulated Cables
- IS 2465 Cables for Motor Vehicles
- IS 3975 Steel Armour Wires & Tapes for Cables
- IS 14255 Aerial Bunched Cables
- IS 9857 Welding Cables
- IEC 60502 Power Cables 1 kV to 30 kV
- ANSI/TIA 568-C Ethernet (Twisted-Pair) Cables
- IEC 60245 Rubber Insulated Flexible Cables
- BS EN 50525 Low Voltage Energy Cables
- IEC 60227 PVC Insulated Cables up to 450/750 V
- BS 7846 Fire Resistant Armoured Cables
- BS 7629 Fire Resistant Screened Cables
- BS EN 50618 Solar PV Cables
- IEC 62930 Solar PV Cables
- BS 7655 Cable Insulation & Sheathing Materials
- BS EN 50288 Communication & Control Cables
- BS 6004 PVC Insulated & Sheathed Cables
- PAS 5308 Control & Instrumentation Cables
- ISO 6722 Automotive Cables
- BS 7889 Thermosetting Non-Armoured Cables
- BS 5467 Thermosetting Armoured Cables
- BS 6195 Flexible Cables for Coil Leads
- HD 626 Aerial Bunched Cables
- BS 6231 Single Core PVC Flexible Cables
- BS EN 50396 Non-Electrical Test Methods for Cables
- IEC 60811 Test Methods for Cable Materials
All NABL testing categories
- Cable & Wire Testing 1,558 accredited tests
- Conductor & Insulating Mat Testing 134 accredited tests
- Battery & Cell Testing 583 accredited tests
- Household Appliance Testing 384 accredited tests
- Overhead Line Hardware Testing 128 accredited tests
- LED Lamp & Luminaire Testing 573 accredited tests
- IT & Electronics Safety Testing 181 accredited tests
- UPS Safety Testing 46 accredited tests
- Environmental & Reliability Testing 312 accredited tests
See the NABL testing service for how we work. Tests listed are within NABL accreditation (ISO/IEC 17025).
Not sure which certification your product needs?
Talk to a team led by former BIS Directors. We'll map every approval your product needs before you spend on testing.