NABL accredited testing
IS 10810 Testing: Methods of Test for Cables
NABL accredited testing of methods of test for cables to IS 10810: 277 tests, each against its clause.
| Standard | IS 10810 |
|---|---|
| Covers | Cross Linked Polyethylene Insulated, PVC sheathed cables for working voltages up to and Including 1100 volts; PVC insulated (heavy duty) Electric cables For Working voltages up to and including 1100 Volts; Elastomer Insulated Flexible Cables for use in mines; Halogen Free Flame Retardant (HFFR) cables; PVC Insulated Cables; Elastomer insulated Cables for working voltages up to and including 1100 volts; Aerial Bunched Cables; Cables for Motor Vehicles; Flexible Cable for Lifts and other Flexible Connections, Part-1 Elastomeric Insulated Cables; Welding Cables; Flexible Cable for Lifts and other Flexible Connections, Part-2 PVC Insulated Circular Cables; Cross Linked Polyethylene Insulated, Thermoplastic sheathed cables Working voltage up to and including 1100 Volts; Winding wires for submersible motors HR PVC insulated Wires; Winding wires for submersible motors Cross- linked Polyethylene insulated and Polyamide Jacketed Wires; Winding wires for submersible motors Polyester and Polypropylene insulated winding wires; Low carbon Galvanised Steel Wires Formed Wire And Tapes For Armouring Of cables |
| Accredited tests | 277 |
| Accreditation | NABL, ISO/IEC 17025:2017 |
| BIS-recognised testing | Ask us which laboratory your BIS scheme accepts |
| Category | Cable & Wire Testing |
IS 10810 tests we offer
Cross Linked Polyethylene Insulated, PVC sheathed cables for working voltages up to and Including 1100 volts
| # | Test | Clause / method |
|---|---|---|
| 1 | Halogen Acid Gas | Cl.15.1.1(C2)-f Cl.16.13, 16.8 of IS 7098 (Pt-1),IS10810(Pt-59) |
| 2 | Cold Impact Test | Cl. 15.4(b) of IS 7098(Pt-1), Cl. 4.1,(Table-2) of IS 5831,IS 10810 (Pt 21) |
| 3 | Armour Resistance Test | Cl. 15.1(b) Cl. 13.6(g) of IS 7098 (Pt-1),Cl. 8.4 of IS3975,IS 10810 (Pt 42) |
| 4 | Loss of mass test | Cl. 15.1(e)- iofIS 7098(Pt-1),Cl. 4.1 (table- 2)IS 5831,IS 10810 (Pt 10) |
| 5 | Tensile strength of insulation & Sheath | Cl. 15.1(d),(e)-i of IS7098(Pt-1),Cl. 4.1 (table-1,2) of IS 5831,IS 10810 (Pt 7) |
| 6 | Thickness of Insulation & Sheath | Cl. 15.1(C) Cl. 9.2,12.3, 14.3.1 (Table- 3,5,8) of IS 7098 (Pt-1),IS 10810 (Pt 6) |
| 7 | Torsion test on Galvanized steel wire for armouring | Cl. 15.1(b) Cl. 13.6(c)of IS 7098(Pt-1),Cl. 8.2 of Table 6 of IS3975,IS 10810 (Pt 38) |
| 8 | Mass of Zinc coating | Cl. 15.1(b) Cl.13.6 (f)of IS 7098(Pt-1), Cl. 9.1 of IS 3975,IS 10810 (Pt 41) |
| 9 | Tensile strength for Aluminium Conductor | Cl. 15.1(a)- i) of IS7098(Pt-1),Cl. 7.2.1. of IS 8130,IS 10810(Pt 2) |
| 10 | Flame Retardance Teston Single Cable | Cl. 15.1.1(C1)-b,Cl.16.5 of IS 7098 (Pt-1),IS 10810 (Pt61) |
| 11 | Smoke Density | Cl. 15.1.1(C2)-e Cl.16.10 of IS 7098 (Pt-1),IS 10810 (Pt- 63), ASTM D 2843 |
| 12 | Hot deformation test | Cl. 15.1(e)- vofIS7098(Pt-1), Cl. 4.1 (Table 2) of IS5831,IS 10810 (Pt 15) |
| 13 | Oxygen Index Test | Cl. 15.1.1(C1)-a Cl.16.4 of IS 7098 (Pt- 1),IS 10810 (Pt 58) |
| 14 | Shrinkage test | Cl. 15.1(d),(e)- iv,vi Cl.4.1(Table-1,2) of IS 7098(Pt-1),IS 10810(Pt 12) |
| 15 | Annealing test for Copper Conductor | Cl. 15.1(a)-i) of IS7098(Pt-1),Cl. 7.1.2.1, 7.2.3 of IS8130,IS 10810 (Pt 1) |
| 16 | Dimension for armouring material | Cl.15.1(b) Cl.13.6(a), (b) of IS 7098(Pt- 1),Cl.7 of IS 3975,IS 10810 (Pt 36) |
| 17 | Insulation resistance (Volume Resistivity) | Cl. 15.1(f) Cl.4.1 (table-1) of IS 7098(Pt-1),IS 10810 (Pt 43) |
| 18 | Temperature Index Test | Cl.15.1.1(C2)-g Cl.16.9 of IS 7098(Pt- 1),IS 10810 (Pt -64) |
| 19 | Uniformity of Zinc coating | Cl. 15.1(b) Cl. 13.6(e) of IS 7098(Pt-1),Cl. 9.2 of IS3975,IS 10810 (Pt40) |
| 20 | Water Absorption (Gravimetric) | Cl. 15.1(d)-v Cl. 4.1(Table-1) of IS 7098(Pt-1),IS 10810(Pt 33) |
| 21 | Heat shock test | Cl. 15.1(e)-vi of IS7098(Pt-1),Cl. 4.1(Table-2) of IS5831,IS 10810 (Pt 14) |
| 22 | Ageing in air oven- Elongation | Cl. 15.1(d),(e)- i Cl.4.1,(table-1,2),IS 7098(Pt-1),IS 10810(Pt 11) |
| 23 | Ageing in air oven- Tensile Strength | Cl. 15.1(d),(e)- i Cl.4.1,(table-1,2), IS 7098(Pt-1),IS 10810(Pt 11) |
| 24 | Elongation at break of armouring material | Cl. 15.1(b) Cl.13.6(a),(b) of IS 7098(Pt-1),IS 10810 (Pt 37) |
| 25 | Elongation at break of insulation | Cl. 15.1(d),(e)-i Cl.4.1 (table-1,2) of IS 7098(Pt-1),IS 10810 (Pt 7) |
| 26 | Flame retardance test on bunched cables | Cl. 15.1.1(C1)-c Cl.16.6 of IS 7098 (Pt- 1),IS 10810 (Pt -62) |
| 27 | Tensile strength of armouring material | Cl. 15.1(b) Cl.13.6(a),(b) of IS 7098(Pt- 1),IS 10810 (Pt 37) |
| 28 | Winding test on Galvanized steel strips for armouring | Cl. 15.1(b) Cl. 13.6(d) of IS 7098(Pt- 1),IS 10810 (Pt 39 |
| 29 | Flammability test (unaffected portion/ under period of Burning) | Cl. 15.1(h) Cl.16.3 of IS 7098(Pt-1),IS 10810 (Pt 53) |
| 30 | High voltage Test | Cl. 15.1(g) Cl. 16.2ofIS 7098 (Pt- 1),IS 10810 (Pt 45) |
| 31 | Hot Set Test (Elongation under load & permanent elongation) | Cl. 15.1(d)- i Cl. 4.1(Table-1) of IS 7098(Pt-1),IS 10810 (Pt 30) |
| 32 | Thermal Stability | Cl. 15.1(e)-viofIS7098(Pt- 1),Cl.4.1(Table-2) of IS 5831,IS 10810 (Pt 60) |
| 33 | Resistivity & Conductance test of Armour (Wires/strips) | Cl. 15.1(b) Cl. 13.6(g) of IS 7098(Pt-1),Cl. 8.4 of IS 3975,IS10810 (Pt 42) |
| 34 | Conductor resistance | Cl. 15.1(a)-iv) of IS7098(Pt-1),Cl. 7.3 (Table-1,2) of IS 8130,IS 10810 (Pt 5) |
| 35 | Wrapping test for Aluminium Conductor | Cl. 15.1(a)- i) of IS7098(Pt-1),Cl.7.2.2 of IS 8130,IS 10810 (Pt 3) |
| 36 | Cold Bend Test | Cl.15.4(a) of IS 7098(Pt-1),Cl. 4.1,(Table- 2) of IS 5831,IS10810 (Pt 20 |
PVC insulated (heavy duty) Electric cables For Working voltages up to and including 1100 Volts
| # | Test | Clause / method |
|---|---|---|
| 1 | Smoke Density | Cl. 15.1.1 (C2) Cl 16.11 of IS 1554(Pt-1) IS 10810 (Pt.-63), ASTM D 2843 |
| 2 | Cold Impact Test | Cl. 15.4(b) of IS 1554(Pt-1),Cl. 4.1 (Table-1,2) of IS 5831,IS 10810 (Pt 21) |
| 3 | Shrinkage test | Cl.15.1(d)-3 of IS1554(Pt-1),Cl. 4.1 (Table-1,2) of IS 5831,IS 10810 (Pt 12) |
| 4 | Flame retardance test onbunched cables | Cl. 15.1.1 (C1) Cl.16.7 of IS 1554 (Pt- 1),IS 10810 (Pt -62) |
| 5 | Temperature Index Test | Cl. 15.1.1 (C1,C2) Cl.16.10 of IS 1554 (Pt-1),IS 10810 (Pt -64) |
| 6 | Tensile strengthof insulation&sheath | Cl.15.1(d)-1 of IS1554(Pt-1), Cl. 4.1 (table-1,2) of IS 5831,IS 10810 (Pt 7) |
| 7 | Uniformity of Zinc coating | Cl. 15.1(b) Cl. 13.6(e) of IS 1554 (Pt- 1),Cl. 9.2 of IS3975,IS 10810 (Pt40) |
| 8 | Winding test on Galvanized steel strips forarmouring | Cl. 15.1(b) Cl. 13.6 (d)of IS 1554(Pt-1),IS 10810 (Pt 39) |
| 9 | Wrapping test for Aluminium Conductor | Cl.15.1(a)-3) of IS1554(Pt-1), Cl.7.2.2of IS 8130,IS 10810(Pt 3) |
| 10 | Highvoltage Test (AC) | Cl. 15.1(f) Cl. 16.3 of IS 1554 (Pt-1),IS 10810 (Pt 45) |
| 11 | Highvoltage Test (DC) | Cl. 15.1(f) Cl. 16.3 of IS 1554(Pt-1),IS 10810 (Pt 45) |
| 12 | Cold Bend Test | Cl. 15.4(a) of IS 1554(Pt-1),Cl. 4.1 (Table-1,2) of IS 5831,IS 10810 (Pt 20) |
| 13 | Heat shock test | Cl. 15.1(d)-6 of IS1554(Pt-1), Cl. 4.1(Table-1,2) of IS5831,IS 10810 (Pt 14) |
| 14 | Mass of Zinc coating | Cl. 15.1(b) Cl. 13.6 (f)of IS 1554 (Pt-1),Cl. 9.1 of IS 3975,IS 10810 (Pt 41) |
| 15 | Ageing in air oven- Elongation | Cl. 15.1(d)-2 of IS1554(Pt-1), Cl. 4.1 (table-1,2)IS 5831,IS10810 (Pt 11) |
| 16 | Conductor resistance | Cl. 15.1(a)-4) of IS1554(Pt-1),Cl. 7.3, (Table-1,2) of IS 8130,IS 10810 (Pt 5) |
| 17 | Halogen Acid Gas | Cl. 15.1.1 (C2)Cl.16.9ofIS 1554 (Pt-1),IS 10810(Pt-59) |
| 18 | Hot deformation test | Cl. 15.1(d)-4 of IS1554(Pt-1), Cl. 4.1 (Table1,2) of IS 5831,IS 10810 (Pt 15) |
| 19 | Loss ofmass test | Cl. 15.1(d)-5 of IS 1554(Pt-1), Cl. 4.1 (table-1,2) IS 5831,IS 10810 (Pt 10) |
| 20 | Oxygen Index Test | Cl. 15.1.1 (C1,C2) Cl.16.5 of IS 1554 (Pt- 1),IS 10810 (Pt 58) |
| 21 | Annealing test for Copper Conductor | Cl. 15.1(a)-1) of IS1554(Pt-1),Cl. 7.1.2.1 of IS 8130,IS10810 (Pt 1) |
| 22 | Armour Resistance Test | Cl. 15.1(b) Cl.13.6 (g)of IS 1554 (Pt-1), Cl. 8.4 of IS 3975,IS 10810 (Pt 42) |
| 23 | Dimension for armouring material | Cl.15.1 b), Cl.13.6(a),(b) of IS1554(Pt-1), Cl.7 of Table 5 of IS 3975,IS10810 (Pt 36) |
| 24 | Elongationat break of armouringmaterial | Cl. 15.1(b) Cl.13.6(a),(b) of IS1554(Pt- 1),IS 10810(Pt 37) |
| 25 | Elongationat break of insulation& sheath | Cl. 15.1(d)-1 of IS1554(Pt-1),Cl. 4.1 (table-1,2) of IS 5831,IS 10810 (Pt 7) |
| 26 | Flame Retardance Teston Single Cable | Cl. 15.1.1 (C1) Cl.16.6 of IS 1554(Pt- 1),IS 10810 (Pt 61) |
| 27 | Insulation resistance constant | Cl. 15.1(e) of IS 1554(Pt-1), Cl. 4.1 (table-1) of IS 5831,IS10810 (Pt 43) |
| 28 | Resistivity & Conductance test of Armour (Wires/strips) | Cl. 15.1(b) Cl. 13.6(g) of IS1554 (Pt-1),Cl. 8.4 of IS975,IS 10810 (Pt42) |
| 29 | Tensile strength of armouring material | Cl. 15.1(b) Cl.13.6(a),(b) of IS 1554(Pt- 1),IS 10810 (Pt 37) |
| 30 | Thickness of Insulation&Sheath | Cl. 15.1(C) Cl. 9.2,9.3, 12.3, 14.4.1, (Table-2,4,7) of IS 1554(Pt-1),IS 10810 (Pt 6) |
| 31 | Torsion test on Galvanized steel wire forarmouring | Cl. 15.1(b) Cl. 13.6(c)of IS 1554(Pt-1),Cl. 8.2 of Table 6 of IS3975,IS 10810 (Pt 38) |
| 32 | Thermal Stability | Cl. 15.1(d)-7 of IS1554(Pt-1), Cl. 4.1 (Table-1,2)of IS 5831,IS 10810 (Pt 60) |
| 33 | Ageing in air oven- Tensile Strength | Cl. 15.1(d)-2 of IS1554(Pt-1),Cl. 4.1(table-1,2)IS 5831,IS 10810 (Pt 11) |
| 34 | Tensile strength for Aluminium Conductor | Cl. 15.1(a)-2) of IS1554(Pt-1), Cl. 7.2.1.of IS 8130,IS10810 (Pt 2) |
| 35 | Flammability test (unaffected portion/ under period of Burning) | Cl. 15.1(h) Cl.16.4 of IS 1554(Pt-1),IS 10810 (Pt 53) |
| 36 | Volume Resistivity | Cl. 15.1(e) of IS1554(Pt-1), Cl.4.1(table- 1)of IS 5831,IS 10810 (Pt43) |
Elastomer Insulated Flexible Cables for use in mines
| # | Test | Clause / method |
|---|---|---|
| 1 | Annealing | IS 14494:2019, Cl 26.1 a (i),IS 10810 (P-1) Cl 1 to 11.2 |
| 2 | Conductor Resistance | IS 14494:2019, Cl 26.1 a (ii),IS 10810 (P-5) Cl 1 to 11.2 Table-1 |
| 3 | Diameter of Armour Wire | IS 14494:2019, Cl 26.1 b (iii),IS 10810 (P-36) Cl 1 to 11.2 |
| 4 | Elongation at Break on Armour Wire | IS 14494:2019, Cl 26.1 c (i),IS 10810 (P-37) Cl 1 to 11.2 |
| 5 | Elongation At Break on Insulation | IS 14494:2019, Cl 26.1 d (i),IS 10810 (P-7) Cl 1 to 11.2 |
| 6 | Elongation at Break on Sheath | IS 14494:2019, Cl 26.1 e (i),IS 10810 (P-7) Cl 1 to 11.2 |
| 7 | Elongation: on Insulation Accelrated Ageing Test by air pressure method | IS 14494:2019, Cl 26.1 d (iii),IS 10810 (P-56) Cl 1 to 11.3 |
| 8 | Elongation: on Sheath Accelrated Ageing Test by air pressure method | IS 14494:2019, Cl 26.1 e (ii),IS 10810 (P-56), Cl 1to 11.3 |
| 9 | Flammability test (unaffected portion/ under period of Burning) | IS 14494:2019, Cl 26.1 q,IS 10810 (P-53) Cl 1 to 11.3 |
| 10 | Hot Set (Permanent Set) | IS 14494:2019, Cl 26.1 d (iv), IS 10810 (P-30) Cl 1 to 11.2 |
| 11 | Insulation Resistance | IS 14494:2019, Cl 26.1 f,IS 10810 (P-43) Cl 1 to 11.2 |
| 12 | Mass of Zinc Coating | IS 14494:2019, Cl 26.1 c (iv)IS 10810 (P-40) Cl 1 to 11.2 |
| 13 | Oil Resistance | IS 14494:2019, Cl 26.1 e (iv),IS 10810 (P-31) Cl 1 to 11.2 |
| 14 | Resistivity of Steel Wire | IS 14494:2019, Cl 26.1 c(v),IS 10810 (P-42) Cl 1 to 11.2 |
| 15 | Tear Resistance Test | IS 14494:2019, Cl 26.1 e (v),IS 10810 (P-17) Cl 1 to11.3 |
| 16 | Tebnsile Strength | IS 14494:2019, Cl 26.1 c (i),IS 10810 (P-37) Cl 1 to 11.2 |
| 17 | Tensile Strength on Insulation | IS 14494:2019, Cl 26.1 d (i),IS 10810 (P-7) Cl 1 to 11.2 |
| 18 | Tensile Strength on Sheath | IS 14494:2019, Cl 26.1 e (i),IS 10810 (P-7) Cl 1 to 11.2 |
| 19 | Tensile Strength on Sheath Accelrated Ageing Test by air pressure method | IS 14494:2019, Cl 26.1 e (ii),IS 10810 (P-56) Cl 1 to 11.3 |
| 20 | Tensile Strength: on Insulation Accelrated Ageing Test by air pressure | IS 14494:2019, Cl 26.1 d (iii),IS 10810 (P-56)Cl 1 to 11.3 |
| 21 | Thermal Ageing In Air Oven On Insulation Variation in Elongation | IS 14494:2019, Cl 26.1 d (ii),IS 10810 (P-11) Cl 1 to11.2 |
| 22 | Thermal Ageing In Air Oven On Insulation Variation in Tensile Strength | IS 14494:2019, Cl 26.1 d (ii),IS 10810 (P-11) Cl 1 to 11.2 |
| 23 | Thermal stability | IS 14494:2019, Cl 26.1 p, IS 10810 (P-28) Cl 1 to 11.3 |
| 24 | Thickness Of Inner Sheath | IS 14494:2019, Cl 26.1 b (ii),IS 10810 (P-6) Cl 1 to 11.2 |
| 25 | Thickness Of Insulation | IS 14494:2019, Cl 26.1 b (i),IS 10810 (P-6) Cl 1 to 11.2 |
| 26 | Thickness Of Outer Sheath | IS 14494:2019, Cl 26.1 b (iv)IS 10810 (P-6) Cl 1 to 11.2 |
| 27 | Torsion | IS 14494:2019, Cl 26.1 c (ii),IS 10810 (P-38) Cl 1 to 11.3 |
| 28 | Uniformity Of Zinc Coating | IS 14494:2019, Cl 26.1 c (iii),IS 10810 (P-40) Cl 1 to 11.2 |
| 29 | Water Absorption by Electrical Method | IS 14494:2019, Cl 26.1 p, IS 10810 (P-28) Cl 1 to 11.3 |
Halogen Free Flame Retardant (HFFR) cables
| # | Test | Clause / method |
|---|---|---|
| 1 | Test for Over all Dimensions and Thickness of Insulation & Sheath | Table-2, III).b),Cl.11.2, 11.3, 12.2, 12.3, 13.2, 13.4, 13.5, 13.6, 14.2, 14.4, 14.5, 14.6,15.2,15.4, 15.5, Table 3 to 8of IS 17048, IS 10810 (Pt 6) |
| 2 | Test on Filers/Dummy Cores and Binder Tapes/Identification Threads(if any) Assessment of Halogen | Table-2, III).d).i),Cl. 5.7,Annex D of IS 17048, IS 10810(Pt-59) |
| 3 | Tensile strength for Aluminium Conductor | Table-2, III).a).iv),Cl. 4.1 of IS 17048, Cl. 7.2.1 a,b of IS 8130, IS 10810 (Pt 2) |
| 4 | Annealing test for Copper Conductor | Table-2, III).a). i),Cl. 4.1 of IS 17048, Cl. 7.1.2.1 & 7.2.3 of IS 8130, IS 10810 (Pt 1) |
| 5 | Assessment of Halogen | Table-2, III).e).vi),Cl. 5.7,Annex D of IS 17048, IS 10810(Pt- 59) |
| 6 | Ozone resistance test | Table-2, III).c).xi),Cl. 4.2,Annex A of IS 17048, IS 10810 (Pt.13) |
| 7 | Smoke Density | Table-2, III).f).vi),Cl.5.6,of IS 17048, IS 10810 (Pt 63) |
| 8 | Ageing in air oven- Tensile strength | Table-2, III).c).vi),Cl. 4.2, Annex A of IS 17048,IS 10810 (Pt 11) |
| 9 | Cold Impact Test | Table-2, III).f).vi), Cl.5.1, Annex A, B of IS 17048, IS 10810 (Pt 21) |
| 10 | Flame Retardant Test | Table-2, III).f).v), Cl.5.11,of IS 17048, IS 10810 (Pt 61) |
| 11 | Temperature Index Test | Table-2, III).e).iv), Cl. 5.5, of IS 17048, IS 10810 (Pt -64) |
| 12 | Flammability test (unaffected portion/ under period of Burning) | Table-2, III).f). i), Cl. 5.3, of IS 17048, IS 10810 (Pt 53) |
| 13 | Hot Set Test (Elongation under load & permanent elongation) | Table-2, III).c).xi), Cl. 4.2, Annex A of IS 17048, IS 10810 (Pt 30) |
| 14 | Cold Bend Test | Table-2, III).f). i), Cl.5.1, Annex A,B of IS 17048, IS 10810 (Pt 20) |
| 15 | Conductor resistance | Table-2, III).a).i, Cl. 4.1 of IS 17048, Cl. 7.3 of IS 8130, IS 10810 (Pt 5) |
| 16 | Elongation at break of insulation before and after ageing | Table-2, III).c).i), Cl. 4.2, Annex A of IS 17048, IS 10810 (Pt 7) |
| 17 | Elongation at break of sheath before and after ageing | Table-2, III).e).i),Cl. 4.5, Annex B of IS 17048, IS 10810 (Pt 7) |
| 18 | High voltage Test (AC) | Table-2, III).f).i), Cl. 5.1, of IS 17048, IS 10810 (Pt 45) |
| 19 | Hot deformation test | Table-2, III).e).vi), Cl. 4.5, Annex B of IS 17048, IS 10810 (Pt 15) |
| 20 | Insulation resistance | Table-2, III).c). i), Cl. 4.2, Annex A of IS 17048, IS 10810 (Pt 43) |
| 21 | Oxygen Index Test | Table-2, III).c).iv), Cl. 5.4, of IS 17048, IS 10810(P-58) |
| 22 | Persulphate test for tinned copper | Table-2, III).a). i),Cl. 5.10 of IS 17048, Cl. 7.1.1 of IS 8130, IS 10810 (Pt -4) |
| 23 | Tensile strength of insulation before and after ageing | Table-2, III).c).i),Cl. 4.2, Annex A of IS 17048, IS 10810 (Pt 7) |
| 24 | Tensile strength of sheath before and after ageing | Table-2, III).c).i),Cl. 4.5, Annex B of IS 17048,IS 10810 (Pt 7) |
| 25 | Water Immersion test (Effect of water on sheath of cable)-Elongation | Table-2, III).f).vi),Cl.5.13,of IS 17048,IS 10810 (Pt 7) |
| 26 | Water Immersion test (Effect of water on sheath of cable)- Tensile Strength | Table-2, III).f).vi),Cl.5.13,of IS 17048,IS 10810 (Pt 7) |
| 27 | Wrapping test for Aluminium Conductor | Table-2, III).a).v),Cl. 4.1 of IS 17048, Cl. 7.2.2 of IS 8130, IS 10810 (Pt 3) |
PVC Insulated Cables
| # | Test | Clause / method |
|---|---|---|
| 1 | Cold Impact Test | Table-1, i).c).d),13),9),Cl.5.4,8.4 of IS 694,Table-1 of IS 5831,IS 10810 (Pt 21) |
| 2 | Hot deformation test | Table-1, i).c),d).6),Cl. 5.4,8.4 of IS 694,Table-1,2 of IS5831,IS 10810 (Pt 15) |
| 3 | Shrinkage test | Table-1, i).c).d),4),Cl. 5.4,8.4 of IS 694,Table-1 of IS 5831,IS 10810 (Pt 12) |
| 4 | Volume Resistivity | Table-1, i).e).2),Cl.5.4, 8.4 of IS 694,Table-1 of IS 5831,IS 10810 (Pt 43) |
| 5 | Annealing test for Copper Conductor | Table-1, i).a).1),Cl.4.1 of IS 694,Cl. 7.1.2.1,7.2.3 of IS 8130,IS 10810 (Pt 1) |
| 6 | Halogen Acid Gas | Table-1, i).c).d).10),13),Cl. 10.6 of IS 694,IS 10810(Pt-59) |
| 7 | Highvoltage Test (AC) | Table-1, i).e).1),3) (Cl. 10.2, of IS 694,IS 10810 (Pt 45) |
| 8 | Highvoltage Test (DC) | Table-1, i).e).1)3),Cl. 10.1, of IS 694,IS 10810 (Pt 45) |
| 9 | Oxygen Index Test | Table-1, i).c).d),8),11),Cl. 10.5, of IS 694,IS10810 (Pt 58) |
| 10 | Temperature Index Test | Table-1, i).c).d),9),12) Cl. 10.7, of IS 694,IS10810 (Pt -64) |
| 11 | Persulphate test ( for tinned Copper Conductor) | Table-1, i).a).5),Cl.10.11 of IS 694,Cl. 7.1.1 of IS 8130,IS10810 (Pt-4) |
| 12 | Overal dimensions and Thickness of Insulation / Sheath | Table-1, i).b) (Cl.5.3, 8.3, 9, 16.1.2, 16.1.3, 17.1.2, 17.1.3,18.1.2, 18.1.4, 18.1.5,18.1.6, 19.1.3, 19.1.5, 19.1.6, 19.1.7, 20.1.2,20.1.4, 20.1.5, 21.1.2,22.1.2, 22.1.4,, table-3, 4, 5, 6, 7,9,10 of IS 694,IS 10810 (Pt 6) |
| 13 | Cold Bend Test | Table-1, i).c).d),8),12),Cl.5.4,8.4 of IS 694,Table-1 of IS 5831,IS10810 (Pt 20) |
| 14 | Ageing in air oven- Tensile Strength | Table-1, i).c).d),3),Cl. 5.4,8.4 of IS 694,Table-1 of IS 5831,IS 10810 (Pt 11) |
| 15 | Tensile strength for Aluminium Conductor | Table-1, i).a).2), Cl.4.1 of IS 694,Cl. 4.1, 7.2.1 a, b of IS 8130,IS 10810 (Pt 2) |
| 16 | Conductor resistance | Table-1, i).a).4),Cl.4.2 of IS 694,Cl. 7.3 of IS 8130,IS 10810(Pt 5) |
| 17 | Tensile strength of insulation & sheath | Table-1, i).c).d).1) Cl. 5.4,8.4 of IS 694,Table-1 of IS 5831,IS10810 (Pt 7) |
| 18 | Wrapping test for Aluminium Conductor | Table-1, i).a).3),Cl.4.1 of IS 694,Cl. 7.2.2ofIS 8130,IS 10810 (Pt 3) |
| 19 | Elongation at break of insulation & sheath | Table-1, i).c).d).1) Cl. 5.4,8.4 of IS 694,Table-1 of IS 5831,IS10810 (Pt 7) |
| 20 | Flammability test (unaffected portion / under period of Burning) | Table-1, i).c).10),Cl.10.4, of IS 694 / IS 10810 (Part 53) |
| 21 | Loss of mass test | Table-1, i).c),d),2)Cl. 5.4,8.4 of IS 694,Table-1,2 of IS5831,IS 10810 (Pt 10) |
| 22 | Heat shock test | Table-1, i).d).5),6)Cl. 8.4 of IS 694,Table 1 of IS 5831,IS 10810 (Pt 14) |
| 23 | Ageing in air oven- Elongation | Table-1, i).c).d),3),Cl. 5.4,8.4 of IS 694,Table-1 of IS 5831,IS 10810 (Pt 11) |
| 24 | Insulation resistance | Table-1, i).e).2),Cl.5.4, 8.4 of IS 694,Table-1 of IS 5831,IS 10810 (Pt 43) |
| 25 | Thermal Stability | Table-1, i).c).d),7),Cl. 5.4,8.4ofIS 694,Table-1 of IS 5831,IS 10810 (Pt 60) |
Elastomer insulated Cables for working voltages up to and including 1100 volts
| # | Test | Clause / method |
|---|---|---|
| 1 | Annealing test for Copper Conductor | Cl. 21.1, of IS 9968(Pt-1), Cl.7.1.2, 7.2.3 of IS 8130,IS 10810 (Pt 1) |
| 2 | Water absorption test | Cl. 21.1 of IS 9968(Pt-1),Cl. 4.1 (Table-2) of IS 6380,IS 10810(Pt.28) |
| 3 | Oil resistance- Elongation | Cl. 21.1(f) of IS 9968(Pt-1), Cl. 4.1 (Table-2,3) of IS 6380,IS 10810 (Pt.31) |
| 4 | Oil resistance-Tensile Strength | Cl. 21.1(f) of IS 9968(Pt-1), Cl. 4.1(Table-2,3) of IS 6380, IS 10810 (Pt.31) |
| 5 | Hot Set Test | Cl.22.1 of IS:9968(Pt-1) & IS 10810 (Pt 30)-1984 |
| 6 | Persulphate test ( for tinned Copper Conductor) | Cl.22.1 of IS:9968(Pt-1) & IS 10810 (Pt -4) -1984 |
| 7 | High voltage Test (Water Immersion) | Cl. 21.1,Cl. 22.2 of IS9968(Pt-1),IS 10810 (Pt 45) |
| 8 | Hot Set Test (Elongation under load & permanent elongation) | Cl. 21.1(e) Cl. 4.1 (Table-1) of IS 9968(Pt- 1),IS 10810 (Pt 30) |
| 9 | Ageing in air bomb- Elongation | Cl. 21.1(b) of IS9968(Pt-1),Cl. 4.1(Table-2,3) of IS6380,IS 10810 (Pt 56) |
| 10 | Tensile strength of insulation & sheath | Cl. 21.1(a) of IS 9968(Pt-1),Cl.4.1 (Table-2,3) IS 6380,IS 10810 (Pt 7) |
| 11 | Ageing in air oven- Elongation | Cl. 21.1(b) of IS 9968(Pt-1), Cl. 4.1 (Table-2,3) of IS 6380,IS 10810 (Pt 11) |
| 12 | Ageing in air oven- Tensile strength | Cl. 21.1(b) of IS 9968(Pt-1),Cl. 4.1 (Table-2,3) of IS 6380,IS 10810 (Pt 11) |
| 13 | Ageing in oxygen bomb- Elongation | Cl. 21.1(d) of IS 9968(Pt-1),Cl. 4.1 (Table-2,3) of IS 6380,IS 10810 (Pt 16) |
| 14 | Ageing in oxygen bomb- Tensile Strength | Cl. 21.1(d) of IS 9968(Pt-1),Cl. 4.1 (Table-2,3) of IS 6380,IS 10810 (Pt 16) |
| 15 | Elongation at break of insulation & sheath | Cl. 21.1(a) of IS 9968(Pt-1),Cl.4.1 (Table-2,3) IS 6380,IS 10810 (Pt 7) |
| 16 | Flammability test (unaffected portion/ under period of Burning) | Cl. 21.1,Cl. 22.3 of IS 9968(Pt-1),IS 10810 (Pt 53) |
| 17 | Tear resistance | Cl. 21.1(g) of IS 9968(Pt-1), Cl. 4.1 (Table-3) of IS6380,IS 10810(Pt.17) |
| 18 | Tensile strength for Aluminium Conductor | Cl. 21.1,Cl.3 of IS9968(Pt-1),Cl.7.2.1 a&b of IS 8130,IS10810 (Pt 2) |
| 19 | Ageing in air bomb- Tensile Strength | Cl. 21.1(b) of IS9968(Pt-1), Cl. 4.1(Table-2,3) of IS6380,IS 10810 (Pt 56) |
| 20 | Wrapping test for Aluminium Conductor | Cl. 21.1, Cl.3 of IS9968(Pt-1),Cl.7.2.2of IS 8130,IS 10810 (Pt 3) |
| 21 | Conductor resistance | Cl. 21.1(d) of IS 9968(Pt-1), Cl. 4.1 (Table- 2,3) of IS 8130, IS10810 (Pt 5) |
| 22 | Thickness of Insulation and Sheath and Overal dimensions | Cl. 21.1, Cl.12,19 (Table-1 to 10) of IS 9968(Pt-1), IS 10810 (Pt 6) |
| 23 | Insulation resistance | Cl. 21.1 of IS 9968(Pt-1),Cl. 4.1(Table-2) of IS 6380,IS 10810 (Pt 43) |
Aerial Bunched Cables
| # | Test | Clause / method |
|---|---|---|
| 1 | Wrapping test | Cl. 10.1(a)- i of IS 14255, Cl.7.2.2 of IS 8130,IS 10810 (Pt 3) |
| 2 | Insulation resistance (Volume Resistivity) | Cl. 10.1(f) Cl. 5.1(Table-1,2) of IS 14255,IS 10810 (Pt43) |
| 3 | Thickness of Insulation | Cl. 10.1(e) Cl. 7.2(Table-4) of IS 14255,IS 10810 (Pt 6) |
| 4 | Ageing in air oven- Elongation | Cl. 10.1(c)- i Cl. 5.1(Table-1) of IS 14255,IS 10810 (Pt 11) |
| 5 | Ageing in air oven- Tensile Strength | Cl. 10.1(c)- i Cl. 5.1(Table-1) of IS 14255,IS 10810 (Pt 11) |
| 6 | Elongation at break of insulation | Cl.10.1(c)-i Cl. 5.1(Table-1,2) of IS 14255,IS 10810 (Pt 7) |
| 7 | High voltage Test | Cl. 10.1(g) Cl. 11.2 of IS 14255,IS 10810 (Pt 45) |
| 8 | Tensile strength of insulation | Cl. 10.1(c)-i Cl. 5.1,(Table-1,2) of IS 14255,IS 10810 (Pt 7) |
| 9 | Test on Messenger Conductor-Conductor resistance | Cl.10.1(a)- i of IS 14255, Cl. 6 (Table- 3) of IS 8130,IS 10810 (Pt 5) |
| 10 | Water Absorption (Gravimetric) | Cl. 10.1(c)-v Cl. 5.1,(Table-1) of IS 14255,IS 10810 (Pt 33) |
| 11 | Physical test for PE insulation-Elongation atbreak | Cl. 10.1(d)-i Cl. 5.1(Table-1,2) of IS 14255,IS 10810(Pt.7) |
| 12 | Bending test | Cl.10.4,11.4 of IS 14255,IS 10810 (Pt 50) |
| 13 | Conductor resistance | Cl.10.1(a)- i of IS 14255,Cl. 7.3 (Table- 1,2) of IS 8130,IS 10810 (Pt 5) |
| 14 | Shrinkage test | Cl. 10.1(c)-iv Cl. 5.1,(Table-1) of IS 14255,IS 10810 (Pt12) |
| 15 | Tensile strength of aluminium conductor | Cl. 10.1(a)-i of IS 14255,Cl. 7.2.1. of IS 8130,IS 10810 (Pt 2) |
| 16 | Carbon black test - Content | Cl. 10.1(c)-vi Cl. 5.1(Table-1,2) of IS 14255,IS 10810(Pt 32) |
| 17 | Hot Set Test (Elongation under load & permanent elongation) | Cl. 10.1(c)- i Cl. 5.1, (Table-1) of IS 14255, IS 10810 (Pt 30) |
Cables for Motor Vehicles
| # | Test | Clause / method |
|---|---|---|
| 1 | Ageing in air oven (Insulation &Sheath)- Elongation Variation | IS 2465 ( e)-2 of Cl.12.1 & IS 10810(Part-11) |
| 2 | Ageing in air oven (Insulation &Sheath)- Tensile Strength Variation | IS 2465 ( e) -2 of Cl.12.1 & IS 10810(Part-11) |
| 3 | Ageing in Oxygen Bomb (Tensile strength Variation) | IS 2465 ( f)-3 of Cl.12.1 & IS 10810(Part-16) |
| 4 | Ageing in Oxygen Bomb Elongation at Break Variation) | IS 2465 ( f)-3 of Cl.12.1 & IS 10810(Part-16) |
| 5 | Effect of cooling on flexibility for general cables) | IS 2465 ( a) of Cl.12.4& IS 10810(Part-20 & 21) |
| 6 | Test for overall dimensions and Thickness of Insulation /Sheath | IS 2465 Cl.7.2 &10.3 & 11 & 12 & IS 10810(Part-6) |
| 7 | Annealing test (for copper) | IS 2465 (a) of Cl.12.1 & IS 10810(Part-1) |
| 8 | Conductor Resistance test | IS 2465 : ( c) of Cl.12.1 & IS 10810(Part-5) |
| 9 | Elongation at break (Insulation &Sheath) | IS 2465 ( e)-1 & (f)- 1 of Cl.12.1& IS 10810(Part-7) |
| 10 | Flammability test (unaffected portion / under period of Burning) | IS 2465 (b) of Cl.12.4 & IS 10810(Part-53) |
| 11 | Heat shock test (Insulation & Sheath) | IS 2465 ( E) -5 of Cl.12.1 & IS 10810(Part-14) |
| 12 | High Voltage test | IS 2465 ( g) Cl.12.1&14.1&14.3& IS 10810(Part-43) |
| 13 | Hot deformation (Insulation &Sheath) | IS 2465 ( e) -4 of Cl.12.1 & IS 10810(Part-15) |
| 14 | Loss of mass test (Insulation &Sheath) | IS2465 (e) -3 Cl.12.1& IS 10810(Part-10) |
| 15 | Persulphate test for tinned copper only | IS2465 (b) of Cl.12.1& IS 10810(Part-4) |
| 16 | Shrinkage test (Insulation &Sheath) | IS 2465 ( e) -6 of Cl.12.1 & IS 10810(Part-12) |
| 17 | Tensile strength (Insulation &Sheath) | IS 2465 ( e) -1 of Cl.12.1 & IS 10810(Part-7) |
Flexible Cable for Lifts and other Flexible Connections, Part-1 Elastomeric Insulated Cables
| # | Test | Clause / method |
|---|---|---|
| 1 | Ageing In Air Bomb On Sheath | IS 4289 (P-1) 1984 Cl 17.1(f) 2,IS 10810 (P-56) Cl 1to 11.3 |
| 2 | Ageing In Oxygen Bomb | IS 4289 (P-1) 1984 Cl 17.1(e) 3,IS 10810 (P-16) Cl 1to 11.3 |
| 3 | Annealing | IS 4289 (P-1) 1984 Cl 17.1(b),IS 10810 (P-1) Cl 1 to11.2 |
| 4 | Conductor Resistance | IS 4289 (P-1) 1984 Cl 17.1(c),IS 10810 (P-5) Cl 1 to11.2, Table-1 |
| 5 | Elongation at Break on Insulation | IS 4289 (P-1) 1984 Cl 17.1(e) 1,IS 10810 (P-7) Cl 1to 11.2 |
| 6 | Elongation at Break on Sheath | IS 4289 (P-1) 1984 Cl 17.1(f) 1,IS 10810 (P-7) Cl 1 to 11.2 |
| 7 | Flammability | IS 4289 (P-1) 1984 Cl 17.1 (k),IS 10810 (P-53) Cl 1 to 11.3 |
| 8 | High Voltage | IS 4289 (P-1) 1984 Cl 17.1(g) and Cl 18.1,,IS 10810(P-45) Cl 1 to 11.2 |
| 9 | Insulation Resistance | IS 4289 (P-1) 1984 Cl 17.1(h),IS 10810 (P-43) Cl 1to 11.2 |
| 10 | Oil Resistance Elongation at break on Sheath | IS 4289 (P-1) 1984 Cl 17.1 (f) 3,IS 10810 (P-31) 1984,IEC 60840 Clause 12.5.3 |
| 11 | Oil Resistance Tensile Strength on Sheath | IS 4289 (P-1) 1984 Cl 17.1 (f) 3,IS 10810 (P-31) 1984,IEC 60840 Clause 12.5.3 |
| 12 | Persulphate Test | IS 4289 (P-1) 1984 Cl 17.1(a),IS 10810 (P-4) Cl 1 ro11.3 |
| 13 | Tear Resistance Test | IS 4289 (P-1) 1984 Cl 17.1(f) 4, IS 10810 (P-17) Cl 1to 11.3 |
| 14 | Tensile Strength on Insulation | IS 4289 (P-1) 1984 Cl 17.1(e) 1,IS 10810 (P-7) Cl 1to 11.2 |
| 15 | Tensile Strength on Sheath | IS 4289 (P-1) 1984 Cl 17.1(f) 1,IS 10810 (P-7) Cl 1 to 11.2 |
| 16 | Thermal Ageing In Air Oven On Insulation | IS 4289 (P-1) 1984 Cl 17.1(e) 2,IS 10810 (P-11) Cl 1to 11.2 |
| 17 | Thickness Of Insulation and Sheath (mm) | IS 4289 (P-1) 1984 Cl 17.1(d),IS 10810 (P-6):Cl 1 to11.2 |
Welding Cables
| # | Test | Clause / method |
|---|---|---|
| 1 | Annealingtest | Cl. 10.1.a.1, Cl.7 of IS9857,Cl.7.1.2, 7.2.3 of IS 8130,IS 10810(Pt 1) |
| 2 | Conductorresistance | Cl. 10.1.a.2 of IS 9857,Cl. 7.3 (Table- 3,4,5) of IS 8130,IS10810 (Pt 5) |
| 3 | Elongationat break | Cl. 10.1.c.1 of IS 9857, Cl. 4.1 (Table- 2) of IS 6380,IS 10810 (Pt 7) |
| 4 | Oil resistance-Tensile Strength | Cl.10.1.c.4 of IS 9857,Cl. 4.1 (Table-2) of IS 6380,IS 10810(Pt.31) |
| 5 | Thickness of Covering | Cl. 10.1.b, Cl.9.2(Table-1) of IS 9857,IS 10810 (Pt 6) |
| 6 | Oil resistance- Elongation | Cl.10.1.c.4 of IS 9857,Cl. 4.1 (Table-2) of IS 6380,IS 10810(Pt.31) |
| 7 | Ageing in air bomb- Elongation | Cl.10.1.c.3, of IS 9857,Cl. 4.1 (Table- 2,3) of IS 6380,IS10810 (Pt 56) |
| 8 | Ageing in air oven- Elongation | Cl. 10.1.c.2, of IS 9857,Cl. 4.1 (Table- 2,3) of IS 6380,IS10810 (Pt 11) |
| 9 | Ageing in air oven- Tensile Strength | Cl. 10.1.c.2, of IS 9857,Cl. 4.1 (Table- 2,3) of IS 6380,IS10810 (Pt 11) |
| 10 | Static flexibility test | Cl. 10.1.e, Cl.11.3 of IS 9857,IS 10810(Pt.54) |
| 11 | Ageing in air bomb- Tensile Strength | Cl. 10.1.c.3, of IS 9857,Cl. 4.1(Table- 2,3) of IS 6380,IS10810 (Pt 56) |
| 12 | Tensile strength | Cl. 10.1.c.1 of IS 9857,Cl.4.1(Table-2)of IS 6380,IS 10810(Pt 7) |
| 13 | Flammability test (unaffected portion/ under period of Burning) | Cl. 10.1.f, Cl. 11.4 of IS 9857,IS 10810 (Pt 53) |
| 14 | Hot Set Test (Elongation under load & permanent elongation) | Cl. 10.1.c.5 of IS 9857,Cl. 4.1 (Table-3) of IS 6380,IS 10810(Pt 30) |
| 15 | High voltage Test (Water Immersion) | Cl. 10.1.d, Cl.11.1 of IS 9857,IS 10810 (Pt 45) |
Flexible Cable for Lifts and other Flexible Connections, Part-2 PVC Insulated Circular Cables
| # | Test | Clause / method |
|---|---|---|
| 1 | Annealing | IS 4289 (P-2) 2000 Cl 18.1 (a) i,IS 10810 (P-1) Cl 1 to 11.2 2014 |
| 2 | Cold Bend Test | IS 4289 (P-2) 2000 Cl 18.4,IS 10810 (P-20) Cl 1to 11.3 |
| 3 | Cold Impact Test | IS 4289 (P-2) 2000 Cl 18.4,IS 10810 (P-21) Cl 1to 11.3 |
| 4 | Conductor Resistance | IS 4289 (P-2) 2000 Cl 18.1 (a) ii,IS 10810 (P-5) Cl 1 to 11.2, Table-1 |
| 5 | Flammability | IS 4289 (P-2) 2000 Cl 18.1(g),IS 10810 (P-53) Cl 1 to11.3 |
| 6 | Heat Shock Test On Insulation and Sheath | IS 4289 (P-2) 2000 Cl 18.1(c) iv,IS 10810 (P-14) Cl 1to 11.3 |
| 7 | High Voltage Test (Water Immersion) | IS 4289 (P-2) 2000 Cl 18.1(d) and 19..2,IS 10810(P-45) Cl 1 to 11.2 |
| 8 | Insulation Resistance | IS 4289 (P-2) 2000 Cl 18.1(e),IS 10810 (P-43) Cl 1to 11.2 |
| 9 | Loss of Mass In Air Oven | IS 4289 (P-2) 2000 Cl 18.1(c) iii, IS 10810 (P-10) Cl 1to 11.3 |
| 10 | Shrinkage Test on insulation and Sheath | IS 4289 (P-2) 2000 Cl 18.1(c) v,IS 10810 (P-12) Cl 1to 11.3 |
| 11 | Tensile Strength on Insulation and Outer Sheath | IS 4289 (P-2) 2000 Cl 18.1 (c) i,IS 10810 (P-7) Cl 1 to 11.2 |
| 12 | Test For Thickness Of Insulation and Sheath | IS 4289 (P-2) 2000 Cl 18.1 (b),IS 10810 (P-6) Cl 1 to 11.2 |
| 13 | Thermal Ageing In Air Oven On Insulation and Sheath | IS 4289 (P-2) 2000 Cl 18.1(c) ii,IS 10810 (P-11) Cl 1to 11.2 |
| 14 | Thermal Stability Test on Sheath | IS 4289 (P-2) 2000 Cl 18.1 (c) vi,IS 10810 (P-60) Cl 1 to 11.3 |
| 15 | Elongation on Insulation and Sheath | IS 4289 (P-2) 2000 Cl 18.1 (c) i,IS 10810 (P-7) Cl 1 to 11.2 |
Cross Linked Polyethylene Insulated, Thermoplastic sheathed cables Working voltage up to and including 1100 Volts
| # | Test | Clause / method |
|---|---|---|
| 1 | Elongation at break for LSHF sheath | Cl.16.1 of IS7098(Pt.1) & IS 10810(Pt.7): 1984 |
| 2 | Elongation at break for PE sheath | Cl.16.1 of IS7098(Pt.1) & IS 10810(Pt.7): 1984 |
| 3 | Tensile strength for PE sheath | Cl.16.1 of IS7098(Pt.1) & IS 10810(Pt.7): 1984 |
| 4 | Test for Light transmission (Cat. C) | Cl.16.1 of IS7098(Pt.1) & IS 10810 (Pt 63):1993 |
| 5 | Carbon black Content for PE sheath | Cl.16.1 of IS 7098(Pt.1) &IS 10810(Pt.32): 1984 |
| 6 | Hot Set Test | Cl.16.1 of IS:7098(Pt.1) & IS 10810 (Pt 30)-1984 |
| 7 | Tensile strength for LSHF sheath | Cl.16.1 of IS7098(Pt.1) & IS 10810(Pt.7): 1984 |
Winding wires for submersible motors HR PVC insulated Wires
| # | Test | Clause / method |
|---|---|---|
| 1 | Elongation at break of insulation | IS: 8783(Pt-4/Sec.1) & IS 10810 (Pt 7)-1984 |
| 2 | Tensile strength of insulation | IS: 8783(Pt-4/Sec.1) & IS 10810 (Pt 7)-1984 |
| 3 | Thermal Ageing in air oven (Elongation at break) | IS: 8783(Pt-4/Sec.1) & IS 10810 (Pt 11)-1984 |
| 4 | Thermal Ageing in air oven (Tensile Strength) | IS: 8783(Pt-4/Sec.1) & IS 10810 (Pt 11)-1984 |
Winding wires for submersible motors Cross- linked Polyethylene insulated and Polyamide Jacketed Wires
| # | Test | Clause / method |
|---|---|---|
| 1 | Elongation at break of insulation & Jacket | IS: 8783(Pt-4/Sec.2) & IS 10810 (Pt 7)-1984 |
| 2 | Tensile strength of insulation & Jacket | IS: 8783(Pt-4/Sec.2) & IS 10810 (Pt 7)-1984 |
| 3 | Thermal Ageing in air oven (Elongation at break) insulation & Jacket | IS: 8783(Pt-4/Sec.2) & IS 10810 (Pt 11)-1984 |
| 4 | Thermal Ageing in air oven (Tensile Strength) insulation & Jacket | IS: 8783(Pt-4/Sec.2) & IS 10810 (Pt 11)-1984 |
Winding wires for submersible motors Polyester and Polypropylene insulated winding wires
| # | Test | Clause / method |
|---|---|---|
| 1 | Elongation at break of insulation | IS: 8783(Pt-4/Sec. 3) & IS 10810 (Pt 7)-1984 |
| 2 | Tensile strength of insulation | IS: 8783(Pt-4/Sec. 3) & IS 10810 (Pt 7)-1984 |
| 3 | Thermal Ageing in air oven Elongation at break | IS: 8783(Pt-4/Sec. 3) & IS 10810 (Pt 11)-1984 |
| 4 | Thermal Ageing in air oven Tensile strength | IS: 8783(Pt-4/Sec. 3) & IS 10810 (Pt 11)-1984 |
Low carbon Galvanised Steel Wires Formed Wire And Tapes For Armouring Of cables
| # | Test | Clause / method |
|---|---|---|
| 1 | Resistance Test (For Round And Formed Wires) | IS 3975:1999 Cl 8.4, IS 10810 (P-42) Cl 1 to 11.2 Table-1 |
How IS 10810 testing works
- Tell us the purpose. BIS certification, a tender, a customer requirement or a design check. The purpose decides which clauses and which laboratory.
- Get the sample list and quote. We confirm the tests, the number of samples and the timeline for your product and its variants.
- Send samples. We help with labels, the test request and any technical documents the tests need.
- Testing and report. Tests are carried out under NABL accreditation and the report lists each clause, the requirement and the result.
- Review and use. We check the report before you submit it to BIS, a tender authority or your customer, and help if they raise a query.
Frequently asked questions
Which IS 10810 tests are NABL accredited?
All 277 tests listed on this page are within NABL accreditation (ISO/IEC 17025), each against the clause of IS 10810 shown next to it. The report carries the NABL accreditation mark for these tests.
Can the IS 10810 test report be used for BIS certification?
BIS accepts reports only from laboratories it has recognised for the standard. Before testing, we confirm which laboratory your BIS application needs, so you do not pay for a report BIS will not accept.
How many samples are needed for IS 10810 testing?
It depends on the product, its variants and the tests you need. Share the product details and the purpose of the test (BIS, tender or customer) and we will send the sample list and a quote.
Can you test only some clauses of IS 10810?
Yes. For a tender, a customer complaint or a design check, we can test selected clauses. For BIS certification or a type test, every applicable clause has to be covered.
Other cable & wire testing
- IS 7098 XLPE Insulated Cables
- IS 1554 PVC Insulated Heavy Duty Cables
- IS 9968 Elastomer Insulated Cables
- IS 17505 Fire Survival Cables
- IS 6380 Elastomeric Insulation & Sheath for Cables
- IS 5831 PVC Insulation & Sheath for Cables
- IS 4289 Flexible Lift Cables
- IS 16246 Fire Resistant Circuit Integrity Cables
- IS 8130 Conductors for Insulated Cables
- IS 17293 Solar PV Cables
- IS 14494 Flexible Mining Cables
- IS 17048 HFFR Cables
- IS 694 PVC Insulated Cables
- IS 2465 Cables for Motor Vehicles
- IS 3975 Steel Armour Wires & Tapes for Cables
- IS 14255 Aerial Bunched Cables
- IS 9857 Welding Cables
All NABL testing categories
- Cable & Wire Testing 1,558 accredited tests
- Conductor & Insulating Mat Testing 134 accredited tests
- Battery & Cell Testing 583 accredited tests
- Household Appliance Testing 384 accredited tests
- LED Lamp & Luminaire Testing 144 accredited tests
- IT & Electronics Safety Testing 181 accredited tests
- UPS Safety Testing 46 accredited tests
- Environmental & Reliability Testing 225 accredited tests
See the NABL testing service for how we work. Tests listed are within NABL accreditation (ISO/IEC 17025).
Not sure which certification your product needs?
Talk to a team led by former BIS Directors. We'll map every approval your product needs before you spend on testing.